oil pressure / water temp - The 1947 - Present Chevrolet & GMC Truck Message Board Network

salazar44 · 10-13-2007, 07:45 PM

Can anyone show me where they are running their aftermarket gauges (water temp, oil pressure) to their block?

Currently, Im using the stock water temp under the driverside exhaust manifold. and the oil pressure (electronic) in the stock location. Im just curious if I can move my water temp elsewhere, away from high temp manifold.

Dadsredwagon · 10-13-2007, 08:24 PM

on my 230 motor mine is the same location you say yours is,not running electronic though

NF65Fleetside · 10-13-2007, 09:11 PM

Im running my water temp from the intake manifold location and Ive yet to install my electric oil pressure...want to help me with that next weekend?! hehehehe

salazar44 · 10-13-2007, 10:43 PM

lets do it!

60ratrod · 10-15-2007, 06:09 PM

sal if you have a 350 then the only other place that i can think of would be from the intake manifold in the front part of the intake. i actually have my electric fan sensor in that location. if you can't get that to work then i would suggest making a sleeve for the wire out of header wrap or something like that

jchav62 · 10-15-2007, 07:00 PM

Quote:

Originally Posted by 60ratrod

sal if you have a 350 then the only other place that i can think of would be from the intake manifold in the front part of the intake. i actually have my electric fan sensor in that location. if you can't get that to work then i would suggest making a sleeve for the wire out of header wrap or something like that

That's where mine is hooked up. Works fine, but at first the gauge jumped around a bit. Like there were air pockets in the circulation or something. I heard the best place to hook it up is on the side of the head where you have it. My heads didn't have a place for it there, that's why I went to the intake.

10-13-2007, 07:45 PM	#1
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	oil pressure / water temp Can anyone show me where they are running their aftermarket gauges (water temp, oil pressure) to their block? Currently, Im using the stock water temp under the driverside exhaust manifold. and the oil pressure (electronic) in the stock location. Im just curious if I can move my water temp elsewhere, away from high temp manifold. __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

10-13-2007, 08:24 PM	#2
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: oil pressure / water temp on my 230 motor mine is the same location you say yours is,not running electronic though

10-13-2007, 09:11 PM	#3
NF65Fleetside Registered User Join Date: Feb 2007 Location: Los Angeles Posts: 674	Re: oil pressure / water temp Im running my water temp from the intake manifold location and Ive yet to install my electric oil pressure...want to help me with that next weekend?! hehehehe

10-13-2007, 10:43 PM	#4
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: oil pressure / water temp lets do it! __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

10-15-2007, 06:09 PM	#5
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: oil pressure / water temp sal if you have a 350 then the only other place that i can think of would be from the intake manifold in the front part of the intake. i actually have my electric fan sensor in that location. if you can't get that to work then i would suggest making a sleeve for the wire out of header wrap or something like that



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.