One piece side glass?

[muddpile]

Is there such a thing for 64-66 trucks? I have never seen them anywhere, and was wondering if I just wasn't looking hard enough or if there actually aren't any available. I have the stock vent windows, but they need a full overhaul and I figured one piece would be easier. Thanks!

[M1A1TankerTom]

I am sure they are available for 64-66 trucks. Try Brothers, im sure they have them. If you were looking for 60-63 one piece windows you might have more trouble finding them.

[M1A1TankerTom]

hmm..i stand corrected. I checked brothers out and they dont have them. I did find the following link though that has a write up on how to install them and a place that sells the kit.

http://www.classictrucks.com/tech/04...ows/index.html

hope this helps.

[David Flores]

http://www.nolimit.net/

I'm def going to do this when i have the extra cash.

[psychorodder]

I got them from no limit I put them in poor directions you must cut big section of door out to work and cut vent wing channel down .After almost ruining my door I welded cut panel back and got money back. If you go this way get a pro to do it alot of cutting and welding involved

[Tomsriv]

If you don't have AC you need wind-wings. I use mine.

[muddpile]

I read a write up on the install on Classic Trucks Magazine's website.... Wow is that involved.... And expensive! All said and done you are looking at around $1000, as you pretty well need to run their power regualtors as well... I do not have AC, and I have kick vents still as well, so I will be rebuilding my wing windows. Thanks for helping me decide. They look good, but are not worth it to me.