Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-19-2007, 06:44 PM | #1 |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Bucket Seat Identification -NEED HELP-
I'm going back to the Yard next sat. Need help identifying the correct buckets for my 71. There were three sets to choose from all brown. I know the 71-72 could be purchased with the fancy scrolls. One had metal backs-What year is this kinda of blocky looking from rear. Other had plastic backs but more straight lines in the seats, nothing fancy loose in the truck. not original to truck. and third one the gmc-the most complete truck was full of stuff. Could anyone post pictures and years for easy identification. How do you easily identify the year of a gmc?
|
11-19-2007, 09:07 PM | #2 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: Bucket Seat Identification -NEED HELP-
The ones with the metal backs are called utility bucket seats..Wider,and more comfortable in my opinion.They were stock in '69-'72 blazers if optioned that way.Other then that there was just the regular bucket seats.Some had the scroll pattern,some didn't.The only other difference is the '69-'70 bucket seats were shaped a little different.'69-'70s could have scroll patterns too,the scrolls were in the middle though,not towards the sides like '71-72'.'73-middle 70s low back seats were similar,and can be made to work with '71-'72 covers,but the brackets were taller than those from the '69-'72 era.They look similar to the seats from this era though.
Last edited by 1969k10stepside; 11-19-2007 at 09:12 PM. |
11-20-2007, 07:48 AM | #3 | |
Registered User
Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Bucket Seat Identification -NEED HELP-
Quote:
|
|
11-20-2007, 09:06 AM | #4 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,762
|
Re: Bucket Seat Identification -NEED HELP-
While your looking for parts for bigdon, could you ask if he would part with the seat brackets on the drivers side, I'm getting rid of my tilt brackets on the passengers side.
Thanks for your time. J.
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
11-20-2007, 11:53 AM | #5 |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Re: Bucket Seat Identification -NEED HELP-
Jaros44sr, I'm sure the only way I could get those is to purchase the seats complete.
Bigdon, This is my first truck project, always chevelles. I don't know what the sports bumper is. Are you talking about the Bumper Guards? There is about 12 pickups & 3 blazers that I have found so far. |
11-21-2007, 07:44 AM | #6 |
Registered User
Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Bucket Seat Identification -NEED HELP-
The blazer could have a sport bumper or a step bumper. I need the brackets off the sport bumper. Will send you a pic when at home!
|
11-28-2007, 10:22 PM | #7 |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Re: Bucket Seat Identification -NEED HELP-
Ok got some goodies, tell me what i got please, which pair of buckets do you think the remanufactured seat covers for a 71 will work with. thats a garbled sentence hope you understand.
Got this saddle seat with all the brackets-I'm keeping Not sure if this set will work? (set 1) Not Sure if this set will work? (set 2) notice the fancy back pocker in the seat. I included this photo to show all the seats have that same back cover. Eye inspected. Maybe they are slightly different. I don't know yet. Last edited by 71BlazzinOrange; 11-28-2007 at 10:26 PM. Reason: not a gm emblem |
11-28-2007, 10:51 PM | #8 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: Bucket Seat Identification -NEED HELP-
The second pair is from gen 2 blazers with the low back seats.The first look like stock 71-72s with different covers..They might be stock but I've not seen any like that.If you want to sell either set let me know,I might be interested if I could figure shipping out on them.
Last edited by 1969k10stepside; 11-28-2007 at 10:53 PM. |
11-28-2007, 11:04 PM | #9 |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Re: Bucket Seat Identification -NEED HELP-
Thanx for the reply 1969k10, Yep one of those sets has got to go. You can have first crack at them when I figure it out. Both Sets are in extremely good condition with only small cracks/tears.
|
11-29-2007, 12:21 AM | #10 |
Registered User
Join Date: Feb 2006
Location: TX
Posts: 252
|
Re: Bucket Seat Identification -NEED HELP-
Did they have a set of utility buckets? The one with the metal backs? If thats not what you are looking for let me know as I'd be interested. thanks.
|
11-29-2007, 10:48 AM | #11 |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Re: Bucket Seat Identification -NEED HELP-
k-nuts, they did have a set of those metal backed utility buckets. Not shure of the shape, I will check them out more thoughly next time I get back to the yard problably two weeks from now.
|
11-29-2007, 06:58 PM | #12 |
Registered User
Join Date: Feb 2006
Location: TX
Posts: 252
|
Re: Bucket Seat Identification -NEED HELP-
Been waiting 2 years so far to start the resto, what's a couple more weeks!
Probably won't even start it for another year the rate I'm going. I don't even want to start if I don't have real time to work on it. But please let me know if you can. Also check the passenger flip up bracket and see if the latching part it on the outerside of the back of the seat frame. Not in the middle like the other seats. Thanks!! |
11-29-2007, 07:36 PM | #13 | |
Registered User
Join Date: Sep 2007
Location: Minnesota
Posts: 56
|
Re: Bucket Seat Identification -NEED HELP-
Quote:
I just wanted to throw this in. When I was a kid our blazer had the utility seats, one day I flipped the seat up & broke the windshield. I remember the metal plate did it. How much is a set of the seats worth? I think I'm doing OK but would just like to check. |
|
11-29-2007, 08:57 PM | #14 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: Bucket Seat Identification -NEED HELP-
The brackets from utility buckets are different than regular 69-72 bucket seat brackets.I believe they're wider..I need just a regular drivers side bracket for a bucket seat too if there's anymore laying around..
Last edited by 1969k10stepside; 11-29-2007 at 08:58 PM. |
11-30-2007, 08:24 PM | #15 |
Registered User
Join Date: Feb 2006
Location: TX
Posts: 252
|
Re: Bucket Seat Identification -NEED HELP-
I'm no expert by any means. My truck has a set of the other seats in it. It was supposed to have Utility Buckets. If you bolt my current seats to the front bolt holes, then the rear ones do not line up. Same on both sides. (the PO rigged them up a bit to work) The bolt holes for the "pin release thing" on the passenger side on my truck are off set towards the passenger door. Most all the seats I've seen have that release bracket right in the center. I think the trucks with the later or maybe CST seats have bolt holes for both types of seats. Again, I'm no expert just poking around a little before I start to restore mine. I had a post about my seats on here before. I think I want to go the original look on my resto so I'd like a set of the metal back utility buckets and them have them redone to at least look close to original material.
|
Bookmarks |
|
|