aftermarket gauge bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nac593 · 12-02-2007, 08:12 AM

I'm looking for all options for a new bezel. I'm looking for one without the 3 3/8 center hole. Know of any companys?

Dingfodgy · 12-02-2007, 11:07 AM

Check with "Covan's"- I think they make a blank panel (ABS) that you can put whatever gauges you want in whatever location you want. I've heard the quality can be a little sketchy, though.
Also do a search on this site for Ryan Hubbards' all Billet gauge bezel and G-Box door. They are truly works of art, but a bit pricey @ around 4-Franklins per set.
Of course you can always use a glove box door to custom fab your own gauge panel.

Psycho71 · 12-03-2007, 04:23 PM

I'm building my own.

Arad68 · 12-03-2007, 07:27 PM

I have this one.
He is or was a board member at one time. It is a great piece.
http://www.jjengineering.us/products...h/69dash-f.jpg

Arad68 · 12-03-2007, 07:29 PM

Here is a better address.

http://www.jjengineering.us/products...h/6772dash.htm

jorgensensc · 12-03-2007, 07:50 PM

In this picture are both of the indicators facing to the left?

Arad68 · 12-03-2007, 07:58 PM

Quote:

Originally Posted by jorgensensc

In this picture are both of the indicators facing to the left?

I never noticed that. It is still a nice one. Mine is great.

jorgensensc · 12-03-2007, 08:05 PM

Don't get me wrong.. it looks like a fantastic peice, I would love to have one. I just thougt it was funny that's all.
Shawn

Arad68 · 12-03-2007, 08:14 PM

No offense taken, it is funny!

12-02-2007, 08:12 AM	#1
nac593 Registered User Join Date: Sep 2007 Location: san diego,ca Posts: 125	aftermarket gauge bezel I'm looking for all options for a new bezel. I'm looking for one without the 3 3/8 center hole. Know of any companys?

12-02-2007, 11:07 AM	#2
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: aftermarket gauge bezel Check with "Covan's"- I think they make a blank panel (ABS) that you can put whatever gauges you want in whatever location you want. I've heard the quality can be a little sketchy, though. Also do a search on this site for Ryan Hubbards' all Billet gauge bezel and G-Box door. They are truly works of art, but a bit pricey @ around 4-Franklins per set. Of course you can always use a glove box door to custom fab your own gauge panel. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

12-03-2007, 04:23 PM	#3
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: aftermarket gauge bezel I'm building my own. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

12-03-2007, 07:27 PM	#4
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: aftermarket gauge bezel I have this one. He is or was a board member at one time. It is a great piece. http://www.jjengineering.us/products...h/69dash-f.jpg __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

12-03-2007, 07:29 PM	#5
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: aftermarket gauge bezel Here is a better address. http://www.jjengineering.us/products...h/6772dash.htm __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

12-03-2007, 07:50 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: aftermarket gauge bezel In this picture are both of the indicators facing to the left? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE Last edited by jorgensensc; 12-03-2007 at 07:50 PM.

12-03-2007, 08:05 PM	#8
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: aftermarket gauge bezel Don't get me wrong.. it looks like a fantastic peice, I would love to have one. I just thougt it was funny that's all. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

12-03-2007, 08:14 PM	#9
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: aftermarket gauge bezel No offense taken, it is funny! __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.