hood hinges

[nonos64]

looking for custom hood hinges any ideas or help would help iv seen some on these trucks in the mags but just dont know where to get them

[64shortc10]

nonos64,

Your truck looks SICK! What size wheel and tire are you running? I was going to say you need a Dropmember, but you said it for me. Talk to Nathan about the hood hinges, when you're ordering your dropmember. Let me now cause I need a set too! I need to see more pics of your truck, hows the back bagged? Motor-tranny info come on spill the beans! Later

Tony from Norcal

[Slmd92DIME]

your truck looks great man.. post some pics up of the rear setup... I saw some billet hinges awhile back for around $190 I think...

[62scraper]

Here are some http://www.watsons-streetworks.com/hood_deck.html

[nonos64]

happy new years guys and thankx for the tip on the hinges thats the ones I was looking for http://67-72chevytrucks.com/vboard/a...1&d=1199374939

[nonos64]

the big rims im running are 22" scarface I just need my dropmember to get the front in the weedshttp://67-72chevytrucks.com/vboard/attachment.php?attachmentid=325649&stc=1&d=1199375183http://67-72chevytrucks.com/vboard/attachment.php?attachmentid=325650&stc=1&d=1199375183

[Slmd92DIME]

How many gallons is your fuel cell?

[nonos64]

I think 12 gal foam filled

[64shortc10]

How big is the c-notch and will it lay on those tires? Your truck looks SWEET!
Where did you purchase the stuff to bag the rear? Later

Tony from Norcal

[nonos64]

got everything from fenderbender int. or fbi.com with the nothches i have it will lay with 15" wheels but not with the 22"s but the bag mounts was all fabricated out of 1/2" flat bar and I just went back to my stock trailing arms. when I get the money together im getting the dropmember and kp components rear system to lay all the way. latter bro

[Dinos63]

looks good bro, nice work, and a big window,,,nice

[64shortc10]

Looks good! Do you need a different c-notch to lay the 22's or was the suspesion holding it from laying? Thanks for the help and pics! Its gonna look sick tuckin those big a$$ tires! Later

Tony from Norcal

[nonos64]

Originally Posted by 64shortc10

Looks good! Do you need a different c-notch to lay the 22's or was the suspesion holding it from laying? Thanks for the help and pics! Its gonna look sick tuckin those big a$$ tires! Later

Tony from Norcal

ya i think I need a diffrent noch to lay the frame I just put the stock trailing arms back on for pinion angle and I was going to put a 4" block because the trailing arms hit the frame when it drops, but I think I am going to rip it all back out this year and do it better I WANT TO LAY FRAME on 22"

[ElkyRacer]

Where did you say you got the notches from? Looks an awful lot like KP notches. How much were they?

[nonos64]

I dont know how much, came in a package deal but the place was called FBI look in the street truck mag they are always in there.