disc brake rear end.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewlett2002000 · 01-02-2008, 12:06 AM

what if any disc brake rear ends will bolt up to my 66? i know they make kits but there a bit pricey... for me at least. lol
thanks,
John

**ChiefRocka** · 01-02-2008, 04:20 AM

Well, you can always find some rotors that will fit over your axles...then use weld on caliper mounts.

That wouldn't be too bad.

**Chevy Fleetside** · 01-02-2008, 04:54 AM

Quote:

Originally Posted by ChiefRocka

Well, you can always find some rotors that will fit over your axles...then use weld on caliper mounts.

That wouldn't be too bad.

PrerunnerRob · 01-02-2008, 05:30 AM

I've looked into this too, and the most expensive part is the calipers. I think they were from a 76-79 Caddy, and around $250.

protrash64 · 01-02-2008, 05:35 AM

I have seen one truck locally that had a complete swap from a '99 and up GM truck.........6-lug baby! Its a bit wider than the old stuff so backspacing becomes an issue.......also the lug threads are metric. It sure looked nice, however.

poorboy · 01-02-2008, 05:37 AM

When I get to that point I was going to try 4wd rotors with the weld on mounts.

62 short step · 01-02-2008, 06:05 AM

My buddy gave me a complete kit from his 98 z71. It came from one of the popular disc conversion companies, I forget the name.I have an 89 blazer 4x4 axle under my 61 4x4. I'm hopeing it will just bolt up. I agree with the above mentioned weld on some caliper mounts.

Tomsriv · 01-02-2008, 12:50 PM

I got my kit from CCP. It was only a couple hundred dollars more for four wheel than the front wheel disc brake kit. The pain in the butt is rerouting the brake lines and the parking brake. My kit also came with the proper master cylinder for use with 4 wheel discs. Otherwise you will need to get a WilWood adjustable proportioning valve. The rear brakes are off an 80-85 Cadillac Seville.

ElkyRacer · 01-02-2008, 01:31 PM

Ok, better yet, anyone have the measurements off of a stock rear end? Wheel mounting surface to wheel mounting surface (wms-wms)? Im about to see what I can find to slap under my 64 when I swap out the front for 5 lug stuff, if I can even find a bit narrower rear end, that would be great!

Kyle

01-02-2008, 12:06 AM	#1
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	disc brake rear end.... what if any disc brake rear ends will bolt up to my 66? i know they make kits but there a bit pricey... for me at least. lol thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

01-02-2008, 04:20 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: disc brake rear end.... Well, you can always find some rotors that will fit over your axles...then use weld on caliper mounts. That wouldn't be too bad. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-02-2008, 05:30 AM	#4
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: disc brake rear end.... I've looked into this too, and the most expensive part is the calipers. I think they were from a 76-79 Caddy, and around $250.

01-02-2008, 05:35 AM	#5
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: disc brake rear end.... I have seen one truck locally that had a complete swap from a '99 and up GM truck.........6-lug baby! Its a bit wider than the old stuff so backspacing becomes an issue.......also the lug threads are metric. It sure looked nice, however. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

01-02-2008, 05:37 AM	#6
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: disc brake rear end.... When I get to that point I was going to try 4wd rotors with the weld on mounts. __________________ 63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one.

01-02-2008, 06:05 AM	#7
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: disc brake rear end.... My buddy gave me a complete kit from his 98 z71. It came from one of the popular disc conversion companies, I forget the name.I have an 89 blazer 4x4 axle under my 61 4x4. I'm hopeing it will just bolt up. I agree with the above mentioned weld on some caliper mounts. Last edited by 62 short step; 01-02-2008 at 06:06 AM. Reason: spelling

01-02-2008, 12:50 PM	#8
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: disc brake rear end.... I got my kit from CCP. It was only a couple hundred dollars more for four wheel than the front wheel disc brake kit. The pain in the butt is rerouting the brake lines and the parking brake. My kit also came with the proper master cylinder for use with 4 wheel discs. Otherwise you will need to get a WilWood adjustable proportioning valve. The rear brakes are off an 80-85 Cadillac Seville. Last edited by Tomsriv; 01-02-2008 at 12:51 PM.

01-02-2008, 01:31 PM	#9
ElkyRacer Registered User Join Date: Feb 2007 Location: Texarkana Tx/Ark Posts: 143	Re: disc brake rear end.... Ok, better yet, anyone have the measurements off of a stock rear end? Wheel mounting surface to wheel mounting surface (wms-wms)? Im about to see what I can find to slap under my 64 when I swap out the front for 5 lug stuff, if I can even find a bit narrower rear end, that would be great! Kyle



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.