check out the new roll cage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

epsorenson · 01-03-2008, 05:20 PM

just finished this past week.
considering i'm not really an off-roader i wasn't too motivated to get one at first.
truck is more of a pavement pounder but i thought of safety--well, actually my wife brought up the idea....many times

anyhoo, thought it was a good idea considering i've got my kids with me so often.
had it blasted and powder coated black and welded some tabs for 3 point belts in the front (no i didn't reinforce the floors yet).

got to check it out with the top off after i used my new hoist

BobbyK · 01-03-2008, 05:32 PM

Nice.

Hoss72 · 01-03-2008, 05:35 PM

Very Nice ...do you want to build me one...Please

BLUE THUNDER · 01-03-2008, 05:39 PM

Great looking cage. Who fabbed it up? I'd love to get the plans if you have them. I've got two little ones myself, so safety is a priority. Got any pics of the inside mount points? Once again, great looking cage. Later, Mario.

Southedisto · 01-03-2008, 05:46 PM

I like it, can you get me the dimensions? Or just post some more pictures from all angles.?

bouncytruck · 01-03-2008, 06:38 PM

Nice, clean design.

Hoss72 · 01-03-2008, 07:00 PM

Don't mean to jump on your Thread but I found one at Broncobob.com. But it doesn't look as good as this one.

vtblazer · 01-04-2008, 01:02 AM

It looks nice and clean but it needs some triangulation to be functional.

LUV2XCLR8 · 01-04-2008, 02:19 AM

I thought the same thing VT, very sweet but not enough cross braces.

Chevyman63 · 01-04-2008, 02:52 AM

Quote:

Originally Posted by vtblazer

It looks nice and clean but it needs some triangulation to be functional.

I think it looks sweet, but if you were to weld an X from side to side on the angeled section, it would look cool and be much safer for your rear seat passengers.

vtblazer · 01-04-2008, 02:58 AM

Quote:

Originally Posted by LUV2XCLR8

I thought the same thing VT, very sweet but not enough cross braces.

Uhm...no cross bracing.
(that can be seen in the pics anyway)
A little more bracing will go a long way at this point.

Liking the shoulder harness mount though.

72BlckButy · 01-04-2008, 03:36 AM

That looks killer!

Chevyman63 · 01-04-2008, 05:01 AM

I forgot to mention on my previous post...That is one sweet looking Blazer!!!

epsorenson · 01-04-2008, 06:20 AM

thanks for the structural input, advice and compliments everyone.

was made by a local off road shop here in town (dependable off road).

hoss 72--i actually did check out those cages from broncobob. seem like nice cages. as i recall they were $300-$400 raw steel but then the shipping was going to add a lot of $ to the order.

as to taking more pics...the top is back on so it may make the pics a little dark. i'll remember to take some more photos when the top is off again.

epsorenson · 01-04-2008, 11:43 AM

hey guys...maybe a stupid question but here goes:
do you think i can fit 35" tires on my ride?
can you tell from the photos if i'll have enough room?
i've got a 4" lift currently and 33's.

bouncytruck · 01-04-2008, 12:58 PM

I had 35's on my first K5 with a 4" lift. My second Blazer had a 6" lift and my current has a 4" lift. One of the previous owners (a board member) had 35's on it with my current lift. The guy I bought it from (also a board member) put the stock wheels/tires back on because of the gearing. One of your biggest issues is going to be your gearing. My '72 has 3.07, which isn't quite enough for 35's.

Keep in mind, not all 35's are 35" tall. You may also be limited on the amount of off-roading you do with a 4" lift.

epsorenson · 01-04-2008, 01:38 PM

Quote:

Originally Posted by bouncytruck

Keep in mind, not all 35's are 35" tall. You may also be limited on the amount of off-roading you do with a 4" lift.

yeah that's kinda why i was thinking maybe i could get away with it.
my rig is more of a street machine, pounding pavement.

Slick71 · 01-04-2008, 01:48 PM

Sweet Blazer! I'd really love to see more photos of your seats. Where did you get them??

epsorenson · 01-04-2008, 01:51 PM

Quote:

Originally Posted by Slick71

Sweet Blazer! I'd really love to see more photos of your seats. Where did you get them??

from a limo company here in so cal. they take them out when doing stretch conversions of escalades. got the rear and captains. check out the install thread for all info
http://www.67-72chevytrucks.com/vboa...d.php?t=260518

72meanmachine · 01-05-2008, 04:13 PM

Nice blazer!
i need one for my k5, anybody know where i can get one?

myraley · 01-08-2008, 06:51 PM

That roll bar looks great, and I am in So Cal too, so Dependable Off Road may have just gotten another custodmer (when mine finally gets done in the shop...). I was just wondering if it was mounted to the frame or just to the body. I wanted to mount mine to the body-to-frame mounts, but that puts it in the way of the passengers. What approach did you take?
Thanks!

vtblazer · 01-09-2008, 01:19 AM

Quote:

Originally Posted by myraley

That roll bar looks great, and I am in So Cal too, so Dependable Off Road may have just gotten another custodmer (when mine finally gets done in the shop...). I was just wondering if it was mounted to the frame or just to the body. I wanted to mount mine to the body-to-frame mounts, but that puts it in the way of the passengers. What approach did you take?
Thanks!

Okay, I'm just gonna say it...

That is not functional roll bar, yet.
In it's current configuration it will not stay intact in a roll over.

To be a valid roll bar it needs more triangulation/cross bracing.

No intent to flame the builder or the buyer but it is, what it is.

Bishops Trucks · 01-09-2008, 01:27 AM

That looks great. I hope you never have to find out if it works.

epsorenson · 01-09-2008, 05:54 AM

Quote:

Originally Posted by vtblazer

Okay, I'm just gonna say it...

That is not functional roll bar, yet.
In it's current configuration it will not stay intact in a roll over.

To be a valid roll bar it needs more triangulation/cross bracing.

No intent to flame the builder or the buyer but it is, what it is.

yeah you've said that a few times now. i'm not sure what to make of it. i'm certainly not an engineer nor do i have an understanding of roll cages potential to withstand forces in roll over. the guy who built the cage and a few mechanic friends of mine whom i trust told me this thing is strong enough. your concerns obviously make me contemplate my kids safety. again, my main driving is surface streets at reasonable speeds just cruising around. i don't want to "over-engineer" something for the sake of doing so but you seem pretty convinced that this thing is not "functional" and it's not going to stay "intact" with a roll over...yikes

anyone else have any opinions on this?

Bishops Trucks · 01-09-2008, 06:13 AM

A rollbar that is not engineered properly can be more dangerous than a vehicle without one. There would be more tubing in the vehicle that could crush you. The rollbar looks good for something that stays on the main roads but for offroading you would need some bars added from oneside to the other and some verticle bars added to the sides. It would be a maze to get to the back seat.

01-03-2008, 05:20 PM	#1
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	check out the new roll cage just finished this past week. considering i'm not really an off-roader i wasn't too motivated to get one at first. truck is more of a pavement pounder but i thought of safety--well, actually my wife brought up the idea....many times anyhoo, thought it was a good idea considering i've got my kids with me so often. had it blasted and powder coated black and welded some tabs for 3 point belts in the front (no i didn't reinforce the floors yet). got to check it out with the top off after i used my new hoist Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5*

01-03-2008, 05:32 PM	#2
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: check out the new roll cage Nice. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

01-03-2008, 05:35 PM	#3
Hoss72 Registered User Join Date: Oct 2007 Location: San Antonio TX Posts: 124	Re: check out the new roll cage Very Nice ...do you want to build me one...Please

01-03-2008, 05:39 PM	#4
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: check out the new roll cage Great looking cage. Who fabbed it up? I'd love to get the plans if you have them. I've got two little ones myself, so safety is a priority. Got any pics of the inside mount points? Once again, great looking cage. Later, Mario.

01-03-2008, 05:46 PM	#5
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: check out the new roll cage I like it, can you get me the dimensions? Or just post some more pictures from all angles.? __________________ I like wheelin in Dixie!

01-03-2008, 06:38 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: check out the new roll cage Nice, clean design. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-03-2008, 07:00 PM	#7
Hoss72 Registered User Join Date: Oct 2007 Location: San Antonio TX Posts: 124	Re: check out the new roll cage Don't mean to jump on your Thread but I found one at Broncobob.com. But it doesn't look as good as this one.

01-04-2008, 01:02 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: check out the new roll cage It looks nice and clean but it needs some triangulation to be functional.

01-04-2008, 02:19 AM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: check out the new roll cage I thought the same thing VT, very sweet but not enough cross braces. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-04-2008, 03:36 AM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: check out the new roll cage That looks killer! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-04-2008, 05:01 AM	#13
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: check out the new roll cage I forgot to mention on my previous post...That is one sweet looking Blazer!!! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

01-04-2008, 06:20 AM	#14
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: check out the new roll cage thanks for the structural input, advice and compliments everyone. was made by a local off road shop here in town (dependable off road). hoss 72--i actually did check out those cages from broncobob. seem like nice cages. as i recall they were $300-$400 raw steel but then the shipping was going to add a lot of $ to the order. as to taking more pics...the top is back on so it may make the pics a little dark. i'll remember to take some more photos when the top is off again. __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5*

01-04-2008, 11:43 AM	#15
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: check out the new roll cage hey guys...maybe a stupid question but here goes: do you think i can fit 35" tires on my ride? can you tell from the photos if i'll have enough room? i've got a 4" lift currently and 33's. __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5* Last edited by epsorenson; 01-04-2008 at 11:48 AM.

01-04-2008, 12:58 PM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: check out the new roll cage I had 35's on my first K5 with a 4" lift. My second Blazer had a 6" lift and my current has a 4" lift. One of the previous owners (a board member) had 35's on it with my current lift. The guy I bought it from (also a board member) put the stock wheels/tires back on because of the gearing. One of your biggest issues is going to be your gearing. My '72 has 3.07, which isn't quite enough for 35's. Keep in mind, not all 35's are 35" tall. You may also be limited on the amount of off-roading you do with a 4" lift. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 01-04-2008 at 12:58 PM.

01-04-2008, 01:48 PM	#18
Slick71 Registered User Join Date: Feb 2001 Location: Savannah, MO. Posts: 513	Re: check out the new roll cage Sweet Blazer! I'd really love to see more photos of your seats. Where did you get them?? __________________ 1972 Chevy Blazer 4X4 Savannah, MO. www.thefarmatadair.com



Register or Log In To remove these advertisements.

01-05-2008, 04:13 PM	#20
72meanmachine Registered User Join Date: Dec 2006 Location: Elgin,Texas Posts: 9	Re: check out the new roll cage Nice blazer! i need one for my k5, anybody know where i can get one? __________________ Dillon 1972 Custom 10--wrecked wanting to sell, never dodge things in the road 1953 Chevy pickup 1971 Custom 10 1971 Custom 10 1978 Chevy pickup 1970 GMC pickup 1970 Chevy K5 Blazer Life Quote: "Dont pu$$y foot around, money talks and bullsh*t walks!"

01-08-2008, 06:51 PM	#21
myraley Registered User Join Date: Jul 2007 Location: california Posts: 78	Re: check out the new roll cage That roll bar looks great, and I am in So Cal too, so Dependable Off Road may have just gotten another custodmer (when mine finally gets done in the shop...). I was just wondering if it was mounted to the frame or just to the body. I wanted to mount mine to the body-to-frame mounts, but that puts it in the way of the passengers. What approach did you take? Thanks!

01-09-2008, 01:27 AM	#23
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: check out the new roll cage That looks great. I hope you never have to find out if it works. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

01-09-2008, 06:13 AM	#25
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: check out the new roll cage A rollbar that is not engineered properly can be more dangerous than a vehicle without one. There would be more tubing in the vehicle that could crush you. The rollbar looks good for something that stays on the main roads but for offroading you would need some bars added from oneside to the other and some verticle bars added to the sides. It would be a maze to get to the back seat. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

Register or Log In To remove these advertisements.