|
01-06-2008, 02:32 PM
|
#1 |
|
Registered User
Join Date: Nov 2007
Location: New Haven, Kentucky
Posts: 20
|
Heater Installation
I'm finally starting to put a heater back in my truck. The previous owner removed the entire system, heater box, heater core, controls and cabled, everything except the squirrel cage blower. I came across a local craigslist add by someone parting out a 86 k10. I contacted him and he will sell me everything I need for 50 bucks. Just wanting to know if all the parts from the 86 K10 would fit in my 76 C10.
|
|
|
|
01-06-2008, 02:35 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Heater Installation
the heater boxes are slightly different but with some drilling or mods it should bolt right up.. it was many years since i did this i had an 81 cab i put on a 76 frame and used most of my 76 parts
bear in mind i did this once like three years ago and this is the best i can remember
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
