63-66 Hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

502tripower · 02-05-2008, 01:39 AM

Wanted a good rust free hood. Anyone in Washington, Oregon or Idaho have a good hood they want to sell?

Hillbilly Deluxe 65 · 02-05-2008, 10:58 PM

http://www.up22.com/chevytruck.htm#1...ucks%20&%20GMC

502tripower · 02-06-2008, 12:56 AM

Hillbilly, Thanks for the link but, I want a good ol steel hood.

jeff"s62 · 02-06-2008, 11:26 AM

Good luck. Although they fit 5 model years they are hard to find. You may have to get one that may need some lite rust repair. They have certain inherent areas that rust like the rear lower corners.

502tripower · 02-06-2008, 01:09 PM

Quote:

Originally Posted by jeff"s62

Good luck. Although they fit 5 model years they are hard to find. You may have to get one that may need some lite rust repair. They have certain inherent areas that rust like the rear lower corners.

I am very familiar with the availability and rust issues. Thanks Dan

Hillbilly Deluxe 65 · 02-06-2008, 10:31 PM

yea i have been searchin for a stock hood myself for alot less then the prices im seeing..all i need is the front lower part like where the parking lights are, and i would be set, although that cowl hood would make me happy too hah

502tripower · 02-06-2008, 11:24 PM

Quote:

Originally Posted by Hillbilly Deluxe 65

yea i have been searchin for a stock hood myself for alot less then the prices im seeing..all i need is the front lower part like where the parking lights are, and i would be set, although that cowl hood would make me happy too hah

I have found a couple but they are a ways away. The one I have is a very nice hood but has a couple of small bubbles on the passenger rear corner. I really would like to find a rust free hood and keep this one for a spare or another project.

Hillbilly Deluxe 65 · 02-07-2008, 08:48 AM

how pricey was that hood and where at, thanks

502tripower · 02-07-2008, 11:30 PM

Quote:

Originally Posted by Hillbilly Deluxe 65

how pricey was that hood and where at, thanks

200.00 and another 176.00 to crate and ship. It is a little bit spendy but, if it is rust free I think it would be cheaper in the long run rather than trying to chase rust time and materials.

twotons · 09-16-2008, 01:34 AM

Quote:

Originally Posted by 502tripower

200.00 and another 176.00 to crate and ship. It is a little bit spendy but, if it is rust free I think it would be cheaper in the long run rather than trying to chase rust time and materials.

Where is Satsop washington? I am in Spokane and have a extra i think i can look tomorrow and verify.

Alan's Classic · 10-04-2008, 12:18 AM

Do you have any pix of the reinforcements like the back corners and the front corners? Thanks

kdrodworks316 · 10-04-2008, 03:52 AM

Hey there 502, I have 3 good hoods in rexburg Id. $150 obo if you come get it, I could meet you in spokane if you are close to there, just kick me a lil extra for my time and travel, I'm about 500 miles from spokane but I get up there all the time.

502tripower · 10-18-2008, 11:46 AM

Thanks to all but I did find a hood last March but am still looking for transportation. It is in Albuquerque NM. Anyone close to Albuquerque interested in a good hood and I will buy one from one of these guys here. Let me know.

02-05-2008, 10:58 PM	#2
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: 63-66 Hood http://www.up22.com/chevytruck.htm#1...ucks%20&%20GMC __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

02-06-2008, 12:56 AM	#3
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: 63-66 Hood Hillbilly, Thanks for the link but, I want a good ol steel hood. __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

02-06-2008, 11:26 AM	#4
jeff"s62 Registered User Join Date: Jul 2005 Location: Charlotte, MI Posts: 23	Re: 63-66 Hood Good luck. Although they fit 5 model years they are hard to find. You may have to get one that may need some lite rust repair. They have certain inherent areas that rust like the rear lower corners.

02-06-2008, 10:31 PM	#6
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: 63-66 Hood yea i have been searchin for a stock hood myself for alot less then the prices im seeing..all i need is the front lower part like where the parking lights are, and i would be set, although that cowl hood would make me happy too hah __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

02-07-2008, 08:48 AM	#8
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: 63-66 Hood how pricey was that hood and where at, thanks __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

02-05-2008, 01:39 AM	#1
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	63-66 Hood Wanted a good rust free hood. Anyone in Washington, Oregon or Idaho have a good hood they want to sell? __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

10-04-2008, 12:18 AM	#11
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 63-66 Hood Do you have any pix of the reinforcements like the back corners and the front corners? Thanks __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-04-2008, 03:52 AM	#12
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: 63-66 Hood Hey there 502, I have 3 good hoods in rexburg Id. $150 obo if you come get it, I could meet you in spokane if you are close to there, just kick me a lil extra for my time and travel, I'm about 500 miles from spokane but I get up there all the time. __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

10-18-2008, 11:46 AM	#13
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: 63-66 Hood Thanks to all but I did find a hood last March but am still looking for transportation. It is in Albuquerque NM. Anyone close to Albuquerque interested in a good hood and I will buy one from one of these guys here. Let me know. __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD Last edited by 502tripower; 10-18-2008 at 11:54 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.