67 granny tranny shifter boot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cardude66 · 02-06-2008, 01:24 PM

I got a 67 c20 and i need a shifter boot. so far I ordered 3 different times and every time I got the wrong one. They always sent me one that was 8 inches wide and mine is only 6 inches wide . Is it only the 67 that has a 6 inch wide?.Does anybody know where I can get one?

dan42 · 02-06-2008, 03:09 PM

Depends on whether it's a six or an eight. Eights are curved on the front, sixes are flat. I believe there is also a bigger sized boot, though I've never seen one. My '67 took the curved one (it's got a 350 with the sm465)

lilred67 · 02-06-2008, 10:34 PM

http://www.kennystrucks.com/
is where i got mine. it's curved up in the front like mentioned above for the v-8, sm465 setup.

**LockDoc** · 02-07-2008, 02:24 AM

-
I have an extra high hump cover out out of a 70 GMC so I went out and measured the boot. The metal ring measures 7" x 7" and it appears that the boot is 6" x 6" so I wonder if the GMC's were smaller..... Just a guess, I really don't know. It is also square, no rounded areas.

LockDoc

**Bob B.** · 02-07-2008, 11:17 AM

My V-6/NP435 combo uses the flat boot. NP435 shifter sits further back on the transmission than the Muncies do. The boot is roughly 6" X 6".

cardude66 · 02-07-2008, 11:26 AM

Here are a few pics

cardude66 · 09-04-2012, 08:08 PM

ttt

Cardude 66 · 07-17-2015, 09:28 PM

Hello everyone. I was gone for a few years but I am back. I have to finish my truck. I still need a shifter boot and a seat cover. It has to be 6 inches wide by 6 inches high with a bend in the middle. It is for a four speed transmission with a 327 and is out of a 67 c20. I saw on quite a few sites that they sell 68 to 72 but there is no listing for 67. Even a used one would do since I sent my used one to a supplier so that he could match it and I didn't get it back . Thanks for now.
Posted via Mobile Device

**LockDoc** · 07-17-2015, 10:05 PM

Quote:

Originally Posted by Cardude 66

Hello everyone. I was gone for a few years but I am back. I have to finish my truck. I still need a shifter boot and a seat cover. It has to be 6 inches wide by 6 inches high with a bend in the middle. It is for a four speed transmission with a 327 and is out of a 67 c20. I saw on quite a few sites that they sell 68 to 72 but there is no listing for 67. Even a used one would do since I sent my used one to a supplier so that he could match it and I didn't get it back . Thanks for now.
Posted via Mobile Device

If you become a premium member you can post a Want To Buy ad on the parts board. If you click on the the word "Subscribe" in the menu bar above it will list the different options....

LockDoc

**michael bustamante** · 07-17-2015, 10:11 PM

I'm pretty sure the 67 shared the boot with 64-66

**'68OrangeSunshine** · 07-18-2015, 02:33 AM

Or you could make your own out of leather, like the old MGs had. Probably last longer than the rubber in the cheap import repops now on the market.

Cardude 66 · 07-18-2015, 07:26 PM

I don't know if the transmission is shorter because if you look at the picture the shifter hole is half on the flat part and half on the rise of the hump.
Posted via Mobile Device

Cardude 66 · 03-26-2017, 11:23 PM

I might get her going this summer. Still didn't get a boot.

02-06-2008, 01:24 PM	#1
cardude66 Registered User Join Date: Jan 2008 Location: Prince Edward Island Canada Posts: 34	67 granny tranny shifter boot I got a 67 c20 and i need a shifter boot. so far I ordered 3 different times and every time I got the wrong one. They always sent me one that was 8 inches wide and mine is only 6 inches wide . Is it only the 67 that has a 6 inch wide?.Does anybody know where I can get one?

02-06-2008, 03:09 PM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 67 granny tranny shifter boot Depends on whether it's a six or an eight. Eights are curved on the front, sixes are flat. I believe there is also a bigger sized boot, though I've never seen one. My '67 took the curved one (it's got a 350 with the sm465) __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

02-06-2008, 10:34 PM	#3
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 67 granny tranny shifter boot http://www.kennystrucks.com/ is where i got mine. it's curved up in the front like mentioned above for the v-8, sm465 setup.

02-07-2008, 02:24 AM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,891	Re: 67 granny tranny shifter boot - I have an extra high hump cover out out of a 70 GMC so I went out and measured the boot. The metal ring measures 7" x 7" and it appears that the boot is 6" x 6" so I wonder if the GMC's were smaller..... Just a guess, I really don't know. It is also square, no rounded areas. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-07-2008, 11:17 AM	#5
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,381	Re: 67 granny tranny shifter boot My V-6/NP435 combo uses the flat boot. NP435 shifter sits further back on the transmission than the Muncies do. The boot is roughly 6" X 6". __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

02-07-2008, 11:26 AM	#6
cardude66 Registered User Join Date: Jan 2008 Location: Prince Edward Island Canada Posts: 34	Re: 67 granny tranny shifter boot Here are a few pics

09-04-2012, 08:08 PM	#7
cardude66 Registered User Join Date: Jan 2008 Location: Prince Edward Island Canada Posts: 34	Re: 67 granny tranny shifter boot ttt

07-17-2015, 09:28 PM	#8
Cardude 66 Registered User Join Date: Jun 2015 Location: Wellington Prince Edward Island Posts: 5	Hello everyone. I was gone for a few years but I am back. I have to finish my truck. I still need a shifter boot and a seat cover. It has to be 6 inches wide by 6 inches high with a bend in the middle. It is for a four speed transmission with a 327 and is out of a 67 c20. I saw on quite a few sites that they sell 68 to 72 but there is no listing for 67. Even a used one would do since I sent my used one to a supplier so that he could match it and I didn't get it back . Thanks for now. Posted via Mobile Device

07-17-2015, 10:11 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,867	Re: 67 granny tranny shifter boot I'm pretty sure the 67 shared the boot with 64-66 __________________ 1967custom

07-18-2015, 02:33 AM	#11
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,562	Re: 67 granny tranny shifter boot Or you could make your own out of leather, like the old MGs had. Probably last longer than the rubber in the cheap import repops now on the market. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 07-19-2015 at 06:29 AM.

07-18-2015, 07:26 PM	#12
Cardude 66 Registered User Join Date: Jun 2015 Location: Wellington Prince Edward Island Posts: 5	I don't know if the transmission is shorter because if you look at the picture the shifter hole is half on the flat part and half on the rise of the hump. Posted via Mobile Device

03-26-2017, 11:23 PM	#13
Cardude 66 Registered User Join Date: Jun 2015 Location: Wellington Prince Edward Island Posts: 5	Re: 67 granny tranny shifter boot I might get her going this summer. Still didn't get a boot.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.