rear blazer seat pictures needed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodhomi · 02-13-2008, 11:23 PM

Anyone have pictures of their rear seat mounting brackets? I'm trying to determine if the rear seat that was in my blazer was stock. I'm going to sell it and install a removable seat from a suburban.
I know I could just post a picture of it, but I won't be able to take any until this weekend.

Mint68 · 02-14-2008, 07:03 AM

Not the best pictures, but a general idea. Hope it helps.

hotrodhomi · 02-14-2008, 07:24 AM

My seat must be from the next body style. Thanks for the pictures.

bouncytruck · 02-14-2008, 08:43 AM

The seats had either two or for brackets in the back. If they only had two, the belts were bolted directly to the floor in the middle two mounting points.

cstanley · 02-14-2008, 09:35 AM

Quote:

Originally Posted by bouncytruck

The seats had either two or for brackets in the back. If they only had two, the belts were bolted directly to the floor in the middle two mounting points.

any idea what drives this? mine only has the two outside brackets...

bouncytruck · 02-14-2008, 10:08 AM

Quote:

Originally Posted by cstanley

any idea what drives this? mine only has the two outside brackets...

I haven't figured that out yet. My guess is may 72 has the only outside brackets and the other years have all 4?

DANTES JIMMY · 02-14-2008, 10:44 AM

Mine Is A 72 And Only Has Two Outer Brackets

Hey Hot Rod If You Are Installing A Rear Seat Out Of A 90's Suburban
I Put One In A 1993 Burb That Didnt Have One From Factory
And It Was Surprisingly Easy
4 Chunks Of 2"x3" Square Tube Stock Notched Out Section On The 2" Side
Drilled Hole On The Three Inch Side Slid In A 1/2 Or 3/4 Inch Bolt Welded All Up
Located Floor Mounts From Seat Marked Cut And Welded In New Pockets On The Bottom Side (tacked On Top To Just Hold Until I Could Get Them Good From The Bottom )and Used Factory Chrome Trim Plates And You Couldnt Even Tell It Never Had A Seat

hotrodhomi · 02-14-2008, 12:41 PM

I cut my brackets out of a suburban. Should be an easy install. just need to measure a million times before I hack up my floor.

RED72blazer · 02-14-2008, 12:44 PM

Mine is a 72 and it has all four brackets, but they are spaced different than the one pictured.

hotrodhomi · 02-14-2008, 03:15 PM

Here is what I have. Not good pictures, but it was the best I could do with the space I had.

vtblazer · 02-14-2008, 08:28 PM

That's the correct seat for the 69-72 blazers.

hotrodhomi · 02-14-2008, 11:01 PM

Quote:

Originally Posted by vtblazer

That's the correct seat for the 69-72 blazers.

Why no ashtrays? Did they make then with out?

bouncytruck · 02-15-2008, 01:10 AM

Quote:

Originally Posted by hotrodhomi

Why no ashtrays? Did they make then with out?

Looks like the arm rest were recovered. I bet if you pull off the covers, you'll find signs of the hole from the ashtrays.

hotrodhomi · 02-15-2008, 02:04 AM

What is this seat worth?

bouncytruck · 02-15-2008, 03:05 AM

$40-50? It isn't the original cover and the color isn't the most desirable. Also, someone had modified the front brackets with tabs to hold the seat down rather than using the original clamps.

vtblazer · 02-15-2008, 08:33 AM

That's what I was thinking, they were covered up when the new covering was done.

I have a set of 'stock' front legs if you wanna try to sell it that way.
(as stock)

hotrodhomi · 02-15-2008, 01:58 PM

Quote:

Originally Posted by vtblazer

That's what I was thinking, they were covered up when the new covering was done.

I have a set of 'stock' front legs if you wanna try to sell it that way.
(as stock)

Thanks anyway VT. I appreciate the offer, but I just want it gone. I listed it for $40 on craiglist and had 6 replies by the time i got home from work. Only one was a scam

It should be gone tomorrow, if I'm lucky.

hotrodhomi · 02-16-2008, 04:32 AM

It sold in less than 24 hours. Had 7 calls. Must be rare in these parts.

bouncytruck · 02-16-2008, 04:42 AM

What are you going to do about a back seat?

02-13-2008, 11:23 PM	#1
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	rear blazer seat pictures needed. Anyone have pictures of their rear seat mounting brackets? I'm trying to determine if the rear seat that was in my blazer was stock. I'm going to sell it and install a removable seat from a suburban. I know I could just post a picture of it, but I won't be able to take any until this weekend. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-14-2008, 07:03 AM	#2
Mint68 Registered User Join Date: Nov 2004 Location: Nebraska Posts: 762	Re: rear blazer seat pictures needed. Not the best pictures, but a general idea. Hope it helps. Attached Images

02-14-2008, 07:24 AM	#3
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: rear blazer seat pictures needed. My seat must be from the next body style. Thanks for the pictures. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-14-2008, 08:43 AM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: rear blazer seat pictures needed. The seats had either two or for brackets in the back. If they only had two, the belts were bolted directly to the floor in the middle two mounting points. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-14-2008, 10:44 AM	#7
DANTES JIMMY Registered User Join Date: Jan 2008 Location: PENDLETON,INDIANA Posts: 271	Re: rear blazer seat pictures needed. Mine Is A 72 And Only Has Two Outer Brackets Hey Hot Rod If You Are Installing A Rear Seat Out Of A 90's Suburban I Put One In A 1993 Burb That Didnt Have One From Factory And It Was Surprisingly Easy 4 Chunks Of 2"x3" Square Tube Stock Notched Out Section On The 2" Side Drilled Hole On The Three Inch Side Slid In A 1/2 Or 3/4 Inch Bolt Welded All Up Located Floor Mounts From Seat Marked Cut And Welded In New Pockets On The Bottom Side (tacked On Top To Just Hold Until I Could Get Them Good From The Bottom )and Used Factory Chrome Trim Plates And You Couldnt Even Tell It Never Had A Seat

02-14-2008, 12:41 PM	#8
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: rear blazer seat pictures needed. I cut my brackets out of a suburban. Should be an easy install. just need to measure a million times before I hack up my floor. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-14-2008, 12:44 PM	#9
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Re: rear blazer seat pictures needed. Mine is a 72 and it has all four brackets, but they are spaced different than the one pictured. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

02-14-2008, 03:15 PM	#10
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: rear blazer seat pictures needed. Here is what I have. Not good pictures, but it was the best I could do with the space I had. Attached Images __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-14-2008, 08:28 PM	#11
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: rear blazer seat pictures needed. That's the correct seat for the 69-72 blazers.

02-15-2008, 02:04 AM	#14
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: rear blazer seat pictures needed. What is this seat worth? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht Last edited by hotrodhomi; 02-15-2008 at 02:04 AM.

02-15-2008, 03:05 AM	#15
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: rear blazer seat pictures needed. $40-50? It isn't the original cover and the color isn't the most desirable. Also, someone had modified the front brackets with tabs to hold the seat down rather than using the original clamps. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-15-2008, 08:33 AM	#16
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: rear blazer seat pictures needed. That's what I was thinking, they were covered up when the new covering was done. I have a set of 'stock' front legs if you wanna try to sell it that way. (as stock)

02-16-2008, 04:32 AM	#18
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: rear blazer seat pictures needed. It sold in less than 24 hours. Had 7 calls. Must be rare in these parts. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

02-16-2008, 04:42 AM	#19
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: rear blazer seat pictures needed. What are you going to do about a back seat? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.