Ignition switch spacer thingy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jdhcth · 03-01-2008, 02:43 AM

I have a 67 LWB that needs the ignition switch spacer that sits behind the dash on the ignition switch. I guess this style was only on the 67s. Does anybody know where to get one? LMC shows it in their catalog but they don' carry it anymore.

Thanks,
JD

Wrenchbender Ret · 03-01-2008, 02:49 AM

I may have one around the shop. I know I have the GM part number. I will look tomorrow. They were used from 67-72 on C-K models & several years after that on vans. Do you have the cone shaped ring that goes on the front of the dash? georgec2434@yahoo.com

jorgensensc · 03-01-2008, 02:54 AM

I think he is talking about the spacer behind the ignition switch. I also think the bezels on the front are different for a 67 too.

Wrenchbender Ret · 03-01-2008, 03:02 AM

Would the 67 be different then the 68 up? I,ve had a lot of them out & seems like they were the same.

fastom · 03-01-2008, 04:26 AM

The early 67 is different than the late 67 68 up.

71 super · 03-01-2008, 08:00 AM

I "think" I have the bezel an the space for the early 67- they are smaller and different from the later stuff, pm me if interested- bezel is OK for driver- but has scratches.

03-01-2008, 02:43 AM	#1
jdhcth Registered User Join Date: Dec 2005 Location: Houston, TX Posts: 51	Ignition switch spacer thingy I have a 67 LWB that needs the ignition switch spacer that sits behind the dash on the ignition switch. I guess this style was only on the 67s. Does anybody know where to get one? LMC shows it in their catalog but they don' carry it anymore. Thanks, JD

03-01-2008, 02:49 AM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Ignition switch spacer thingy I may have one around the shop. I know I have the GM part number. I will look tomorrow. They were used from 67-72 on C-K models & several years after that on vans. Do you have the cone shaped ring that goes on the front of the dash? georgec2434@yahoo.com

03-01-2008, 02:54 AM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Ignition switch spacer thingy I think he is talking about the spacer behind the ignition switch. I also think the bezels on the front are different for a 67 too. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-01-2008, 03:02 AM	#4
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Ignition switch spacer thingy Would the 67 be different then the 68 up? I,ve had a lot of them out & seems like they were the same.

03-01-2008, 04:26 AM	#5
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Ignition switch spacer thingy The early 67 is different than the late 67 68 up. Last edited by fastom; 03-01-2008 at 04:31 AM.

03-01-2008, 08:00 AM	#6
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Ignition switch spacer thingy I "think" I have the bezel an the space for the early 67- they are smaller and different from the later stuff, pm me if interested- bezel is OK for driver- but has scratches.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.