|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-08-2008, 01:48 AM
|
#1 |
|
Registered User
Join Date: Oct 2005
Location: oklahoma
Posts: 663
|
__front crossmember resto/paint
What would be the logical sequence for rebuilding/repainting front suspension?
Paint while all the bushings etc are out, then reassemble? I don't have the tools/press for installing all new bushings, ball joints etc., but I don't want to try to paint it all after a front-end shop has put new parts in. Suggestions - what did you do? |
|
|
|
03-08-2008, 03:27 AM
|
#2 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: __front crossmember resto/paint
Mask off anywhere you don't want paint and assemble later. About all I would worry about are the stud holes where the ball joints, tie rod ends etc are tight fits.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
