|
03-08-2008, 06:46 AM
|
#1 |
|
KEEP ON TRUCKING
Join Date: Sep 2000
Location: martinsville va
Posts: 2,563
|
94 350 into a 69
i got a 94 van and want to put the motor in the 69.will my intake fit the 94 motor. and is there anything else i need to change to put this newer 350 in the 69
__________________
72 cheyenne 2wd lwb 71 k20 sons bassett va |
|
|
|
03-08-2008, 07:03 AM
|
#2 |
|
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: 94 350 into a 69
Your 69 intake will not fit the 94 motor. The heads are different. You can get a new Edelbrock intake that will fit those heads and then you will be good to go.
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
|
|
|
|
03-08-2008, 07:12 AM
|
#3 |
|
Registered User
Join Date: Dec 2003
Location: albuquerque
Posts: 431
|
Re: 94 350 into a 69
I have a 350 from an 88 Z-28 in mine w/ the roller cam and centerbolt valve covers... The blocks are basically the same so as long as you have the correct motor mounts, accessory brackets and such it should go fairly smooth. Are you going to use a carb or efi?
donovan
__________________
78 C10 LWB Super Cheyenne |
|
|
|
|
03-08-2008, 07:19 AM
|
#4 |
|
laying low
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,543
|
Re: 94 350 into a 69
You can buy an Edelbrock intake to fit the 94 heads or elongate the two center bolt holes on your stock intake on each side as the 94's two center bolts stand up rather than angle like the others. Not a big deal to elongate them.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
|
|
|
|
03-08-2008, 07:23 AM
|
#5 |
|
KEEP ON TRUCKING
Join Date: Sep 2000
Location: martinsville va
Posts: 2,563
|
Re: 94 350 into a 69
useing a carb
thought about the tbi but dont know enough about the wiring and i done a search and found out the wiring is alot harder for the 94. 93 and back was easier the way i understand
__________________
72 cheyenne 2wd lwb 71 k20 sons bassett va |
|
|
|
|
03-08-2008, 09:17 AM
|
#6 |
|
Registered User
Join Date: Dec 2003
Location: albuquerque
Posts: 431
|
Re: 94 350 into a 69
I had previously used a factory aluminum two plane manifold in which I just opened up the two middle holes. Worked good until I had some cash to get a performer manifold. I'm also using an hei that I got off ebay a few years back.
__________________
78 C10 LWB Super Cheyenne |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
