Two 87 chevy swb 4x4* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lvschevytrucks · 04-04-2008, 01:55 AM

lost my job my project has to go parting out 2 trucks,i have lots of new parts if you dont see it ask. parts everywhere
tilt stearing wheel.tight nice shape 100.00
roll bar with lights (for short bed) 75.00
new doors, no glass or hardware, handles and locks shaved 90.00 ec. new fenders 60.00 ec
new inter fenders 35.00 ec new gas tank door 25.00
new cab corners 20.00 ec, rockerpanels 20.00cab mounts.10.00
new complete duel exaust w/ muffler and hangers 175.00
new set of 6 gas shocks 120.00
used door , need work 50.
2 5.0 engines tbi 500.00 ec
2 700 r4 transmissions 250.00 ec
decient 6 ft bed 500.00 6 ft bed that needs lots of work 100. set of new box bolts
roll bar w lights..75.00, nice set of rally wheels w caps, rings and great tires 200.00
frames need work have titles for both one scottsdale, one custom delux to many parts to list hereim willing to hold all large parts for 6 months as long as paid 75% im 20 minutes from I95 and I20 in south carolina

qksilver · 04-04-2008, 05:15 AM

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve

lvschevytrucks · 04-04-2008, 05:49 PM

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve
Steve both of my cabs need work.....but if your interested I have all the pieces

babyJay · 04-04-2008, 06:04 PM

Damn, man. Sorry to hear about the job. That really bites. I'd take a lot of that stuff off your hands and help you out, but I'm afraid I'm too far away. I've been looking for a roll bar for my 79 SWB for a couple years now. Good luck I wish on you.

qksilver · 04-05-2008, 05:08 AM

not to worried about bottom rust, as long as the supports are good. Mine is rusted along the fire wall so there is a rusted gap about 2 inches wide and 4 feet across,. Plus I have seen the drip rails rust on these, if the top is decent and middle , send me some closer pix.
SCJKOVACH@AOL.COM
Thanks,
Steev

benoit454 · 04-06-2008, 01:26 AM

I'd like one of those heater boxes off the firewall how much you asking for one? Need it shipped to Logan WV 25601

lvschevytrucks · 04-06-2008, 04:20 PM

Quote:

Originally Posted by benoit454

I'd like one of those heater boxes off the firewall how much you asking for one? Need it shipped to Logan WV 25601

10.00 plus the ride? thanks

lvschevytrucks · 04-06-2008, 04:22 PM

Quote:

Originally Posted by qksilver

not to worried about bottom rust, as long as the supports are good. Mine is rusted along the fire wall so there is a rusted gap about 2 inches wide and 4 feet across,. Plus I have seen the drip rails rust on these, if the top is decent and middle , send me some closer pix.
SCJKOVACH@AOL.COM
Thanks,
Steev

Ill get pictures today....I know the black one is good except there is a sun roof cut out

benoit454 · 04-07-2008, 03:35 AM

I can't drive that far, I'm in wv.

10 sounds good if you can find out how much it cost to ship to me.

qksilver · 04-07-2008, 03:40 AM

No problem about the sun roof........
Thanks,
Steve

benoit454 · 04-09-2008, 04:32 AM

any idea on shipping yet before you get rid of one or both cabs?

Maybe 20-25 shipped?

let me know as soon as you can because I definately want one and have cash to send.

I need one that aint cracked and just whatever else that's on it or attached you wanna send me would be fine.

I'll take the inside box too blower motor, fan, wiring, heater core whatever, mainly I just need the outside box that's on the firewall, and inside part would be good too.

spudz · 04-09-2008, 05:19 PM

can I get some better pics of the beds and the new fenders and inner fenders?????? I am not that far away..

benoit454 · 04-11-2008, 03:57 AM

ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too.

Again I'm in Logan WV and need them shipped to me I can't pickup.

lvschevytrucks · 04-11-2008, 09:53 PM

Quote:

Originally Posted by spudz

can I get some better pics of the beds and the new fenders and inner fenders?????? I am not that far away..

the fenders and interfenders are brand new ...id love to send you more pictures but im not computer savy and cant figure out how to send more pictures on this sight.

lvschevytrucks · 04-11-2008, 09:55 PM

Quote:

Originally Posted by benoit454

ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too.

Again I'm in Logan WV and need them shipped to me I can't pickup.

im sorrry i havent gotten back to you .....ive been very busy and havnt had much time im sure ill be able to get it out and weight this weekend if you still want it

spudz · 04-12-2008, 01:46 AM

Quote:

Originally Posted by lvschevytrucks

the fenders and interfenders are brand new ...id love to send you more pictures but im not computer savy and cant figure out how to send more pictures on this sight.

pmed you an offer

benoit454 · 04-12-2008, 03:42 AM

no prob. I know what you mean I been working alot and haven't had much free time either.

Please just let me know about shipping the whole deal, inside and out to me.

Thanks again.

b&a72 · 04-12-2008, 05:52 AM

Need the engine motor mount brackets shipping to 85240?

lvschevytrucks · 04-19-2008, 07:28 PM

Quote:

Originally Posted by qksilver

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve

the floor boards are rusted on drivers side I have metal to replace ....i cant get a good picture but the cab mounts are good except the firts brace on the drivers side it is rusted and needs replacing. the cab on the red truck is junk

**old Rusty C10** · 04-20-2008, 05:17 AM

do you have any complete under the bed spare tire carriers if so please price shipped to 11215 in Brooklyn NY

lvschevytrucks · 04-20-2008, 10:12 PM

Quote:

Originally Posted by old Rusty C10

do you have any complete under the bed spare tire carriers if so please price shipped to 11215 in Brooklyn NY

sorry sold it yesterday

LSATERZ28 · 04-22-2008, 05:26 AM

Hello
Do you have the right hand and left hand doors to fit 1987 C-10, also driver side front fender, rust free?. would need shipped to plainfield in. 46168.
How much?

thanks
louie

lvschevytrucks · 04-22-2008, 03:48 PM

Quote:

Originally Posted by LSATERZ28

Hello
Do you have the right hand and left hand doors to fit 1987 C-10, also driver side front fender, rust free?. would need shipped to plainfield in. 46168.
How much?

thanks
louie

i have them but shipping would kill the deal and you can get them new for less

spudz · 04-24-2008, 03:02 AM

You got a pm

benoit454 · 04-30-2008, 01:57 AM

ever get a shipping price on the entire heater box setup inside and out to Logan wv 25601?

04-04-2008, 01:55 AM	#1
lvschevytrucks Unfinished Project Club Join Date: Jul 2005 Location: Florence S.C. Posts: 596	Two 87 chevy swb 4x4* lost my job my project has to go parting out 2 trucks,i have lots of new parts if you dont see it ask. parts everywhere tilt stearing wheel.tight nice shape 100.00 roll bar with lights (for short bed) 75.00 new doors, no glass or hardware, handles and locks shaved 90.00 ec. new fenders 60.00 ec new inter fenders 35.00 ec new gas tank door 25.00 new cab corners 20.00 ec, rockerpanels 20.00cab mounts.10.00 new complete duel exaust w/ muffler and hangers 175.00 new set of 6 gas shocks 120.00 used door , need work 50. 2 5.0 engines tbi 500.00 ec 2 700 r4 transmissions 250.00 ec decient 6 ft bed 500.00 6 ft bed that needs lots of work 100. set of new box bolts roll bar w lights..75.00, nice set of rally wheels w caps, rings and great tires 200.00 frames need work have titles for both one scottsdale, one custom delux to many parts to list hereim willing to hold all large parts for 6 months as long as paid 75% im 20 minutes from I95 and I20 in south carolina Attached Images Last edited by lvschevytrucks; 04-20-2008 at 11:06 PM.

04-04-2008, 05:15 AM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 2 87 chevy swb 4x4 Do you have a decent cab? I need one for my 86. Pm me please. Thanks, Steve

04-04-2008, 05:49 PM	#3
lvschevytrucks Unfinished Project Club Join Date: Jul 2005 Location: Florence S.C. Posts: 596	Re: 2 87 chevy swb 4x4 Do you have a decent cab? I need one for my 86. Pm me please. Thanks, Steve Steve both of my cabs need work.....but if your interested I have all the pieces

04-04-2008, 06:04 PM	#4
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: 2 87 chevy swb 4x4 Damn, man. Sorry to hear about the job. That really bites. I'd take a lot of that stuff off your hands and help you out, but I'm afraid I'm too far away. I've been looking for a roll bar for my 79 SWB for a couple years now. Good luck I wish on you. __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

04-05-2008, 05:08 AM	#5
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 2 87 chevy swb 4x4 not to worried about bottom rust, as long as the supports are good. Mine is rusted along the fire wall so there is a rusted gap about 2 inches wide and 4 feet across,. Plus I have seen the drip rails rust on these, if the top is decent and middle , send me some closer pix. SCJKOVACH@AOL.COM Thanks, Steev

04-06-2008, 01:26 AM	#6
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4 I'd like one of those heater boxes off the firewall how much you asking for one? Need it shipped to Logan WV 25601 __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-07-2008, 03:35 AM	#9
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4 I can't drive that far, I'm in wv. 10 sounds good if you can find out how much it cost to ship to me. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-07-2008, 03:40 AM	#10
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Two 87 chevy swb 4x4 No problem about the sun roof........ Thanks, Steve

04-09-2008, 04:32 AM	#11
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4* any idea on shipping yet before you get rid of one or both cabs? Maybe 20-25 shipped? let me know as soon as you can because I definately want one and have cash to send. I need one that aint cracked and just whatever else that's on it or attached you wanna send me would be fine. I'll take the inside box too blower motor, fan, wiring, heater core whatever, mainly I just need the outside box that's on the firewall, and inside part would be good too. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-09-2008, 05:19 PM	#12
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Two 87 chevy swb 4x4* can I get some better pics of the beds and the new fenders and inner fenders?????? I am not that far away.. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

04-11-2008, 03:57 AM	#13
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4* ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too. Again I'm in Logan WV and need them shipped to me I can't pickup. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-12-2008, 03:42 AM	#17
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4* no prob. I know what you mean I been working alot and haven't had much free time either. Please just let me know about shipping the whole deal, inside and out to me. Thanks again. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-12-2008, 05:52 AM	#18
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Two 87 chevy swb 4x4* Need the engine motor mount brackets shipping to 85240?

04-20-2008, 05:17 AM	#20
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Two 87 chevy swb 4x4* do you have any complete under the bed spare tire carriers if so please price shipped to 11215 in Brooklyn NY __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-22-2008, 05:26 AM	#22
LSATERZ28 Registered User Join Date: Nov 2007 Location: Plainfield Indiana 46168 Posts: 1	Re: Two 87 chevy swb 4x4* Hello Do you have the right hand and left hand doors to fit 1987 C-10, also driver side front fender, rust free?. would need shipped to plainfield in. 46168. How much? thanks louie



Register or Log In To remove these advertisements.

04-24-2008, 03:02 AM	#24
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Two 87 chevy swb 4x4* You got a pm __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

04-30-2008, 01:57 AM	#25
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Two 87 chevy swb 4x4* ever get a shipping price on the entire heater box setup inside and out to Logan wv 25601? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

Register or Log In To remove these advertisements.