|
04-09-2008, 09:37 PM
|
#1 |
|
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,038
|
Non-Auto Tilt
I have found an original non-auto tilt in a C-50 truck. Is it a direct fit to a c-10?
My friend is willing to trade me it for another column as long as it is a tilt column. I purchased a van tilt before I found this one and converted it to a non-auto. I have not put it in my truck yet so I plan on trading it to him, if I compress the intermediate shaft will it fit in a C-50? To convert the van column to work with the C-50 can I just cut off the horse shoe wiring plug from my non-tilt column and splice it or do I need to get the conversion plug? I am stoked about getting an original tilt. I looked on eBay to see how much money I am going to save with the trade but there are not any listings for a non-auto tilt.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. Last edited by lts70; 04-09-2008 at 10:32 PM. |
|
|
|
04-09-2008, 09:57 PM
|
#2 |
|
SWB 4X4 CLUB
Join Date: Feb 2005
Location: PA
Posts: 1,088
|
Re: Non-Auto Tilt
The conversion adapter plug whatever you want to call it is available from the dealer for about 9.00.
Someone can post a part number if not I will dig mine out and get the number for you. Jason |
|
|
|
|
04-09-2008, 10:15 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Non-Auto Tilt
maybe lookup what a drag link is , it has nothing to do with steering column installation
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 04-09-2008 at 10:23 PM. |
|
|
|
|
04-10-2008, 06:21 AM
|
#4 |
|
1970 Daily Driver
Join Date: Jun 2007
Location: Glenns Ferry IDAHO
Posts: 1,038
|
Re: Non-Auto Tilt
Thanks Jason if you can find that part number that would be great.
The column looked as if it were at a steeper angle on the C-50. For sure it was at a lower position as the gauge cluster hardly had a cut out at all for the column to fit up in. I am hoping it is the same size as the ones in the C-10s' just at a steeper angle. If anyone knows please let me know.
__________________
It's not truly yours if you didn't build it yourself or if you don't do your own maintenance. |
|
|
|
|
04-10-2008, 07:01 PM
|
#5 |
|
SWB 4X4 CLUB
Join Date: Feb 2005
Location: PA
Posts: 1,088
|
Re: Non-Auto Tilt
Here you go.
1894851 Jason |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
