who makes a c-noch for 73-82 blazers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tvblazer78 · 04-13-2008, 03:56 AM

Have a guy in the blazer thread asking about this, so I think this is the best place to ask it.

Does anyone know who makes a C-notch for the 73-82 2wd blazers?

Thanks,
Trav

tvblazer78 · 04-14-2008, 03:35 PM

So they do do not make one?

PBFAB.COM · 04-15-2008, 07:31 AM

Quote:

Originally Posted by tvblazer78

So they do do not make one?

I don't think anybody is offering suspension kits and components specific to the blazer... it's always for the C-10 but "should fit with little mods" is what they always say!

I think somebody is going to start selling suspension components that are Blazer specific soon.

FnLow69 · 04-15-2008, 08:50 AM

Quote:

Originally Posted by porterbuilt

I don't think anybody is offering suspension kits and components specific to the blazer... it's always for the C-10 but "should fit with little mods" is what they always say!

I think somebody is going to start selling suspension components that are Blazer specific soon.

I wonder who that might be

tvblazer78 · 04-16-2008, 04:12 PM

Thanks for your help.

Let me know if you are going to do a 4 link for a blazer that will work with the stock floor. I need something better then air over leafs, You can see them in this pic.

Thanks,
Trav

**Captkaos** · 04-16-2008, 05:45 PM

Sched 40 6" pipe section the width of the frame cut in half and welded in..

Crush · 04-16-2008, 06:05 PM

Quote:

Originally Posted by tvblazer78

Thanks for your help.

Let me know if you are going to do a 4 link for a blazer that will work with the stock floor. I need something better then air over leafs, You can see them in this pic.

Thanks,
Trav

+1

I've been talking with AirRide about the AirBar for the C-10 and they have stated that they have sold a few to people with Blazers. I asked what need to be modified and was told that the front mount bolts would not line up to the K5 frame but that the people that have used it have just welded the front mounts on.

My K5 curently has a "homemade" notch, but would REALLY like a bolt in 4-link to go with it.

04-13-2008, 03:56 AM	#1
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	who makes a c-noch for 73-82 blazers? Have a guy in the blazer thread asking about this, so I think this is the best place to ask it. Does anyone know who makes a C-notch for the 73-82 2wd blazers? Thanks, Trav __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012 Last edited by tvblazer78; 04-13-2008 at 03:57 AM.

04-14-2008, 03:35 PM	#2
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: who makes a c-noch for 73-82 blazers? So they do do not make one? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

04-16-2008, 04:12 PM	#5
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: who makes a c-noch for 73-82 blazers? Thanks for your help. Let me know if you are going to do a 4 link for a blazer that will work with the stock floor. I need something better then air over leafs, You can see them in this pic. Thanks, Trav Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012 Last edited by tvblazer78; 04-16-2008 at 04:18 PM.

04-16-2008, 05:45 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: who makes a c-noch for 73-82 blazers? Sched 40 6" pipe section the width of the frame cut in half and welded in.. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.