Wheels decisions - poll - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smashingchuck · 05-03-2008, 04:51 PM

Alright I'm having trouble deciding what wheels to get. What do you guys think. My truck will be black when it's done. I have it pretty much narrowed down to these 3. If you have another suggestion, post it...

The first wheel is the Boyd 2 Tone, Followed by the Intro Vista, then the Intro Vista II.

smashingchuck · 05-03-2008, 04:54 PM

Oh yeah, I'm leaning twoards the Boyds because of the rounder center around the spokes and lug nuts, and it's just a real clean rim. I think the runner up in my book is the Intro Vista II.

seanconnery · 05-03-2008, 05:00 PM

I think if your truck is going to be black with some chrome trim (like around the cab or that trim that runs down the length of the truck) then the vista II would look cool cause it has that small strip running down the center of each spoke. The trim on the truck and the strip on the wheel would complement each other. If you're going to have no trim, I'd go with the vista's.

Are you under the impression that you pay for the boyds because of the name? I kind of am, but thats just me. And besides, arent all intro wheels forged, and not cast like boyds? I'd rather have forged wheels for strength, but thats just my .02

smashingchuck · 05-03-2008, 05:04 PM

I think the Boyds are of good quality, and they are cheaper than the Intro's. Granted that the Intros are probably a little nicer... but I'd say they are comparable. Cost isn't really as important here as getting the right wheel.

The truck is shaved completely smooth - no trim.

cochino12 · 05-03-2008, 05:29 PM

I like 2 but I will never buy a set of boyd wheels ever again. The finish on them is horrible, they just dont shine up like other brands.

smashingchuck · 05-03-2008, 06:47 PM

Quote:

Originally Posted by cochino12

I like 2 but I will never buy a set of boyd wheels ever again. The finish on them is horrible, they just dont shine up like other brands.

that's good to know, although the dealer I'm buying them from has said (without me even asking) that the finish has been looking better on them since the moved the shop back to the original location. I will keep this in mind though... no sense in laying out this much cash and have a mediocre finish.

j.files · 05-03-2008, 08:45 PM

I will never buy another set of Coddington wheels again due to their customer sevrice and the finish of the wheel. The guys at INTRO are great and INTRO wheels are among some of the finest wheels made today. Also check into BILLET SPECIALTIES, BON SPEED, SCHOTT WHEELS, and BOZE. All of these companies are reputable and make remarkable wheels.

tds · 05-04-2008, 03:22 AM

intro vista 2 but full polished without the satin look

**old Rusty C10** · 05-04-2008, 04:53 AM

i voted boyd those look like killer cragars!! i like that better than the other two IMHO

**N2TRUX** · 05-04-2008, 05:35 AM

The shop I buy my wheels from hate Boyds due to poor fit and finish. I say go with the Intro's. I like the Vista II best.

75silverstep · 05-04-2008, 06:46 AM

Well you know what im voting for.........

**LEEVON** · 05-04-2008, 07:16 AM

my vote is for the Vista's. I had a set of Boyd's magneatos and the quality was dissapointing. Intros are sweet, and I think you can get them factory clear coated too?

smashingchuck · 05-04-2008, 07:49 PM

wow... I'm really surprised at all the negative feedback on the Boyds. I had always "suspected" them to be not up to par, but didn't think they were that bad.

I'm thinking 60% Vista II and 40% Vista now....

Just found these.. what do you guys think? Hidden lug nuts... very cool, just have to get a quote from them.

movie:
http://www.schottwheels.com/cover-loc.cfm

discussion:
http://www.pro-touring.com/forum/showthread.php?t=37343

cochino12 · 05-04-2008, 09:46 PM

Quote:

Originally Posted by smashingchuck

wow... I'm really surprised at all the negative feedback on the Boyds. I had always "suspected" them to be not up to par, but didn't think they were that bad.

I'm thinking 60% Vista II and 40% Vista now....

Just found these.. what do you guys think? Hidden lug nuts... very cool, just have to get a quote from them.

That second wheel is pretty awesome, dont really care for the first

f.monroe · 05-04-2008, 09:51 PM

The Americana and Axiom look good . Let us know what type of quote they come back with . Frank

72BlckButy · 05-07-2008, 03:36 PM

Tough decision, but I went with the Intro Vista's...

75silverstep... love the wheels!

75silverstep · 05-08-2008, 08:04 AM

Quote:

Originally Posted by 72BlckButy

Tough decision, but I went with the Intro Vista's...

75silverstep... love the wheels!

Thanks .......

AceX · 05-07-2008, 10:56 PM

The INTRO Vista fits you truck better than the rest.

It's established that the INTRO's have a nicer fit and finish, and the Vista fits your truck better due to the lack of anything protruding from the spokes.

On the Vista II's there is a "trim" band down the middle of each spoke. If you're truck had the chrome trim still, or you are planning to air brush it on later, then these would be a better choice.

Basically, because the Vista's have a "smoother" spoke, they will fit your truck better.

smashingchuck · 05-08-2008, 07:08 AM

Quote:

Originally Posted by AceX

The INTRO Vista fits you truck better than the rest.

It's established that the INTRO's have a nicer fit and finish, and the Vista fits your truck better due to the lack of anything protruding from the spokes.

On the Vista II's there is a "trim" band down the middle of each spoke. If you're truck had the chrome trim still, or you are planning to air brush it on later, then these would be a better choice.

Basically, because the Vista's have a "smoother" spoke, they will fit your truck better.

yeah, I agree with you the theme of the truck is simple and smooth... Vistas it is!

boxrodz · 05-08-2008, 09:40 AM

Quote:

Originally Posted by smashingchuck

Alright I'm having trouble deciding what wheels to get. What do you guys think. My truck will be black when it's done. I have it pretty much narrowed down to these 3. If you have another suggestion, post it...

Not some big inch Pontiac Ralleys, but how 'bout something in the style like Muroc IIs (in 20s with light gunmetal inserts).

smashingchuck · 05-08-2008, 10:01 AM

Quote:

Originally Posted by boxrodz

Not some big inch Pontiac Ralleys, but how 'bout something in the style like Muroc IIs (in 20s with light gunmetal inserts).

damn, I just order my wheels today and you have to go and do something like that! I went with the Vistas.

Thanks for the photo shop. You got the front bumper right.

boxrodz · 05-08-2008, 06:24 PM

Quote:

Originally Posted by smashingchuck

damn, I just order my wheels today and you have to go and do something like that! I went with the Vistas.

Thanks for the photo shop. You got the front bumper right.

Yeah, it took me a while to get to it and come up with this one. I tried some of the different combos that you listed, but I couldn't get them to work. I tried the the Velocitys, but they just didn't look quite right. I figured that I would settle on something a little out of the ordinary.

The Intros should look nice. But, if you like the look, maybe Intro will work with you. They carry a line that has a similar wheel, the HRS 2. I could throw another p'chop together with that particular wheel that has the centers gray'ed-out. (It should look similar to the p'chop in the above post.)

boxrodz · 05-11-2008, 12:14 AM

Quote:

Originally Posted by smashingchuck

... I went with the Vistas.

So, smashingchuck, do you think you went with the right wheel?

Either Vista should look good.

With all of the mods, it looks like all your hard work will pay off in the end.

smashingchuck · 05-12-2008, 02:03 AM

Quote:

Originally Posted by boxrodz

So, smashingchuck, do you think you went with the right wheel?

Either Vista should look good.

With all of the mods, it looks like all your hard work will pay off in the end.

I think it looks really awesome. That rendering is sweet.

Think you could shave the front turn signals and tail lights?

Also I wasn't planning on running all the chrome trim (around the windshield and above the wheel wells) but now you're making me second guess.

boxrodz · 05-13-2008, 12:35 AM

Quote:

Originally Posted by smashingchuck

...Think you could shave the front turn signals and tail lights?

smashingchuck-
I went ahead and 'removed' the windshield trim and filled in the other side marker.

Quote:

Originally Posted by smashingchuck

Also I wasn't planning on running all the chrome trim (around the windshield and above the wheel wells) but now you're making me second guess.

I left some trim to give it some flash with all the black (and dark shadows) and to compliment some of the chrome and billet aluminum. I got the markers and tails shaved in the second chop as well.

Either way, it'll look good.

View Poll Results: Which wheels
Boyd Two Tone	16	29.63%
Intro Vista	23	42.59%
Into Vista II	15	27.78%
Voters: 54. You may not vote on this poll

05-03-2008, 04:51 PM	#1
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Wheel decisions - poll Alright I'm having trouble deciding what wheels to get. What do you guys think. My truck will be black when it's done. I have it pretty much narrowed down to these 3. If you have another suggestion, post it... The first wheel is the Boyd 2 Tone, Followed by the Intro Vista, then the Intro Vista II. __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 06-18-2008 at 10:15 AM.

05-03-2008, 04:54 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Wheels decisions - poll Oh yeah, I'm leaning twoards the Boyds because of the rounder center around the spokes and lug nuts, and it's just a real clean rim. I think the runner up in my book is the Intro Vista II. __________________ 78 Build Thread 4Runner Build

05-03-2008, 05:00 PM	#3
seanconnery Registered User Join Date: Apr 2008 Location: Towson, MD Posts: 197	Re: Wheels decisions - poll I think if your truck is going to be black with some chrome trim (like around the cab or that trim that runs down the length of the truck) then the vista II would look cool cause it has that small strip running down the center of each spoke. The trim on the truck and the strip on the wheel would complement each other. If you're going to have no trim, I'd go with the vista's. Are you under the impression that you pay for the boyds because of the name? I kind of am, but thats just me. And besides, arent all intro wheels forged, and not cast like boyds? I'd rather have forged wheels for strength, but thats just my .02

05-03-2008, 05:04 PM	#4
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Wheels decisions - poll I think the Boyds are of good quality, and they are cheaper than the Intro's. Granted that the Intros are probably a little nicer... but I'd say they are comparable. Cost isn't really as important here as getting the right wheel. The truck is shaved completely smooth - no trim. __________________ 78 Build Thread 4Runner Build

05-03-2008, 05:29 PM	#5
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Wheels decisions - poll I like 2 but I will never buy a set of boyd wheels ever again. The finish on them is horrible, they just dont shine up like other brands. __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 05-03-2008 at 05:29 PM.

05-03-2008, 08:45 PM	#7
j.files Registered User Join Date: Aug 2007 Location: Magnolia, TX Posts: 25	Re: Wheels decisions - poll I will never buy another set of Coddington wheels again due to their customer sevrice and the finish of the wheel. The guys at INTRO are great and INTRO wheels are among some of the finest wheels made today. Also check into BILLET SPECIALTIES, BON SPEED, SCHOTT WHEELS, and BOZE. All of these companies are reputable and make remarkable wheels. Last edited by j.files; 05-04-2008 at 01:13 AM.

05-04-2008, 03:22 AM	#8
tds Registered User Join Date: Jul 2007 Location: minnesota Posts: 191	Re: Wheels decisions - poll intro vista 2 but full polished without the satin look __________________ 1981 - C-10 SCSB Planning on putting this thing on it's rocker!

05-04-2008, 04:53 AM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Wheels decisions - poll i voted boyd those look like killer cragars!! i like that better than the other two IMHO __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-04-2008, 05:35 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Wheels decisions - poll The shop I buy my wheels from hate Boyds due to poor fit and finish. I say go with the Intro's. I like the Vista II best. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-04-2008, 06:46 AM	#11
75silverstep KEEP ON TRUCKIN. Join Date: Sep 2005 Location: TULARE,CALIFORNIA Posts: 604	Re: Wheels decisions - poll Well you know what im voting for......... Attached Images __________________ 1975 C-10 STEPSIDE (ALMOST DONE AGAIN)90 percent done wheres that other 10 haha .1994 GMC Z71 .

05-04-2008, 07:16 AM	#12
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Wheels decisions - poll my vote is for the Vista's. I had a set of Boyd's magneatos and the quality was dissapointing. Intros are sweet, and I think you can get them factory clear coated too? __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

05-04-2008, 07:49 PM	#13
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Wheels decisions - poll wow... I'm really surprised at all the negative feedback on the Boyds. I had always "suspected" them to be not up to par, but didn't think they were that bad. I'm thinking 60% Vista II and 40% Vista now.... Just found these.. what do you guys think? Hidden lug nuts... very cool, just have to get a quote from them. movie: http://www.schottwheels.com/cover-loc.cfm discussion: http://www.pro-touring.com/forum/showthread.php?t=37343 __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 06-18-2008 at 10:15 AM.

05-04-2008, 09:51 PM	#15
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wheels decisions - poll The Americana and Axiom look good . Let us know what type of quote they come back with . Frank __________________ Born and proudly residing in a Red State !

05-07-2008, 03:36 PM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Wheels decisions - poll Tough decision, but I went with the Intro Vista's... 75silverstep... love the wheels! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

05-07-2008, 10:56 PM	#18
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: Wheels decisions - poll The INTRO Vista fits you truck better than the rest. It's established that the INTRO's have a nicer fit and finish, and the Vista fits your truck better due to the lack of anything protruding from the spokes. On the Vista II's there is a "trim" band down the middle of each spoke. If you're truck had the chrome trim still, or you are planning to air brush it on later, then these would be a better choice. Basically, because the Vista's have a "smoother" spoke, they will fit your truck better. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

Register or Log In To remove these advertisements.