20" IROCZ Replica wheels & tires 5x5 Bolt pattern

[jdurant]

Hey, these were on my Blazer when I bought it two weeks ago. They are in LIKE NEW condition. They just aren't my style.
Wheels:
20"(x9 or 9.5 I would guess) IROC replicas
5x5 Bolt Pattern
Tires:
Goodyear Eagle GT2s
275/45/20
If I had to guess, I don't think they have more than 3000 miles on them, and my Blazer doesn't have the power to break them loose--so there is very little wear.
I did some research and from summit and discount tire direct for just wheels and tires(no mount, no balance, no shipping, no tax) would be about $2000.
I posted them on Craigslist for $1400.00. But would be happy to get $1200.00 for them.[IMG][/IMG][IMG][/IMG][IMG][/IMG]

[1badcad]

Looks good, what is your style? What are u going to replace them with?

[jdurant]

Thanks.

I plan to replace them with the original rallies--color matched bronze with the center caps and trim rings on. Somewhere in the area of a 5/5 drop. Remove the bumperettes. Then, I don't know if I can really describe this, but, put an 87 grill with the big bar and the headlight bezels color matched too, the little bars painted black, leaving the stainless trim on the grill--It will look similiar to a 68(I think) grill when I am done. I think overall it will actually tone the truck down a little. As is it is way too conspicuous.

I don't mind 20s or even bigger if it is the right wheel on the right truck. But I rarely like chrome on anything though-polished almost always looks better to me.

Thanks for asking.

[jdurant]

I will also be selling the grill. I think $50 would be fair.

[jdurant]

I am willing to negotiate on the price a little. I'm not against trading something either. I need the following parts.
Lowering stuff. I'm pretty open on that--I have two trucks to lower.
A Good bed--SWB Fleetside.
Good dash pad.
rear led conversion
The little piece of trim that goes under the rear window.
A windshield.
Foxbody/5.0 parts.
Thats all I can think of right now. If you have any of these things, we might be able to work something out.

[Outfoxed]

I have a brand new set of 3" djm spindles and new flip kit. Also have the rear trim that I'm removing from my truck. I might have a good set of trim rings, I have to look. I also have some fox body/5.0 parts what do you need?

[jdurant]

I do plan to use rally wheels on both trucks, so I don't think 3" spindles will clear them. I will do a little more research though. I'm not sure if you can cut that much off the lca.
For the mustang:
some black (preferably) interior pieces. Performance brake stuff 4lug. Suspension stuff. Caster camber plates MM. A small cowl hood. I'm not opposed to slapping a blower on there.

[jdurant]

Got any Buick stuff??

[Outfoxed]

Well I also have 2 inch springs.

As for mustang stuff, the black interior, I've already installed that in my car!!! No 4lug parts converted mine to 5, no extra suspension parts either. I have a convertible Gt about the only things I have are some new LX tail light lens, MSD billet dizzy, 2 new nitto 275-35-18's, strut tower brace, extra main harness and a9l. Once I get it put together and running I'll now exactly what I have extra.

What type of Buick parts do you need????

j/k I don't have that

[Outfoxed]

I also have me rally wheels....

[jdurant]

Man, the only thing I really see that I need is the rear trim. I already have plenty of rally wheels. What kind of 2" springs and for what: mustang or truck? I'm kinda confused.

[Outfoxed]

Don't sweat it, good luck with the sale.....