Matching Glovebox To Cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-11-2008, 12:02 PM

I really like the look of matching the glovebox door to whatever look the gauge bezel has.The first I did was chrome a glovebox door and add woodgrain.I`ve taken a bezel and laminated a piece of formica to smooth it and painted it body color and painted a chromed glovebox door to match.
On my wrecker there`s a gauge bezel that looks like new.But,it`s a dark gray metallic instead of chrome w/the pebble grain black.I found a color to match by DupliColor and painted the edge of the glovebox door with it.Then used DupliColor Truck Bed Liner to spray the center and it`s a close texture.Here`s how it came out:

It`s not dry in the picture,so it looks streaky.But,it came out pretty good.I`ll get a pictureof it mounted after it dries.

**nightmare** · 06-11-2008, 12:06 PM

looks good, can't wait to see pics of it mounted.

Sinisterspeed · 06-11-2008, 12:16 PM

Looks good. I like a guy thats not afraid to look around and figure out how to make what he can see in his mind.

Bishops Trucks · 06-11-2008, 12:59 PM

Looks great Tim.

**special-K** · 06-11-2008, 01:06 PM

Quick drying time today:

69c10step · 06-11-2008, 01:10 PM

Looks great. I like the fact that it is grey and not chrome.

Dr.Jones · 06-11-2008, 01:25 PM

That looks sweat.

N2GMTrux · 06-11-2008, 11:11 PM

I like this added touch.... I wanted to get someone to make a black replica of the woodgrain. I think im going to do the same setup but also the radio delete and ash tray cover. I like it,,,,,,,,,, looks good!!!!!!!!

67_C-30 · 06-11-2008, 11:18 PM

That looks great Tim! That's exactly the look I want in my '67 C-30.

**special-K** · 06-11-2008, 11:23 PM

I have chromed headlight & wiper knobs from Cheyenne Superman I bought (in the stone age) and never used that`ll go in this truck.I`m putting the kickpanel & lower door carpet I bought at the same time in there,too.I,also have an AM/FM/cassette for it.

I wish I had picture from those other dashes.The trucks are long gone and never thought to get pictures.Never thought I`d be sharing pictures on the internet,either.

GRIMSS · 06-11-2008, 11:27 PM

I like it. Looks great with both sides matching.

67_C-30 · 06-11-2008, 11:34 PM

This is awesome look also. It is basically what you did on a chromed glove box door and bezel.

I sent you a PM BTW!

**special-K** · 06-12-2008, 07:16 AM

Man,that is NICE!!!About what I have in mind for the`67 GMC.Except with a red mid-60s car wheel with horn ring.Unless I can make a GMC button for the sport wheel like that one I have.I may just go with black,too.I`m leaning towards a satin paint job at first.

72BlckButy · 06-12-2008, 08:09 AM

That turned out great! Nice work, and great idea!

06-11-2008, 12:02 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Matching Glovebox To Cluster I really like the look of matching the glovebox door to whatever look the gauge bezel has.The first I did was chrome a glovebox door and add woodgrain.I`ve taken a bezel and laminated a piece of formica to smooth it and painted it body color and painted a chromed glovebox door to match. On my wrecker there`s a gauge bezel that looks like new.But,it`s a dark gray metallic instead of chrome w/the pebble grain black.I found a color to match by DupliColor and painted the edge of the glovebox door with it.Then used DupliColor Truck Bed Liner to spray the center and it`s a close texture.Here`s how it came out: It`s not dry in the picture,so it looks streaky.But,it came out pretty good.I`ll get a pictureof it mounted after it dries. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2008, 12:16 PM	#3
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Matching Glovebox To Cluster Looks good. I like a guy thats not afraid to look around and figure out how to make what he can see in his mind. __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

06-11-2008, 12:59 PM	#4
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Matching Glovebox To Cluster Looks great Tim. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

06-11-2008, 01:06 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Matching Glovebox To Cluster Quick drying time today: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2008, 01:10 PM	#6
69c10step Registered User Join Date: Mar 2007 Location: Carroll County, MD Posts: 165	Re: Matching Glovebox To Cluster Looks great. I like the fact that it is grey and not chrome. __________________ '69 short step with dreams of being a hot rod You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.

06-11-2008, 01:25 PM	#7
Dr.Jones Registered User Join Date: Aug 2004 Location: Westminster, Colorado Posts: 36	Re: Matching Glovebox To Cluster That looks sweat. __________________ 70 K-10 75 CJ-5 90 XJ Smell the Magic!

06-11-2008, 11:11 PM	#8
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Matching Glovebox To Cluster I like this added touch.... I wanted to get someone to make a black replica of the woodgrain. I think im going to do the same setup but also the radio delete and ash tray cover. I like it,,,,,,,,,, looks good!!!!!!!! __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

06-11-2008, 11:18 PM	#9
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Matching Glovebox To Cluster That looks great Tim! That's exactly the look I want in my '67 C-30. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

06-11-2008, 11:23 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Matching Glovebox To Cluster I have chromed headlight & wiper knobs from Cheyenne Superman I bought (in the stone age) and never used that`ll go in this truck.I`m putting the kickpanel & lower door carpet I bought at the same time in there,too.I,also have an AM/FM/cassette for it. I wish I had picture from those other dashes.The trucks are long gone and never thought to get pictures.Never thought I`d be sharing pictures on the internet,either. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 06-11-2008 at 11:25 PM.

06-11-2008, 11:27 PM	#11
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: Matching Glovebox To Cluster I like it. Looks great with both sides matching. __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

06-11-2008, 11:34 PM	#12
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Matching Glovebox To Cluster This is awesome look also. It is basically what you did on a chromed glove box door and bezel. I sent you a PM BTW! Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 06-11-2008 at 11:36 PM.

06-12-2008, 07:16 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Matching Glovebox To Cluster Man,that is NICE!!!About what I have in mind for the`67 GMC.Except with a red mid-60s car wheel with horn ring.Unless I can make a GMC button for the sport wheel like that one I have.I may just go with black,too.I`m leaning towards a satin paint job at first. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 06-12-2008 at 09:59 PM.

06-12-2008, 08:09 AM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Matching Glovebox To Cluster That turned out great! Nice work, and great idea! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.