Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-28-2008, 02:07 PM | #1 |
Registered User
Join Date: Feb 2000
Location: Temple, Texas
Posts: 325
|
CPP Transmission Crossmember
Anybody using the trans. crossmember (47-54) from CPP? I need some measurements and they don't want to respond to my emails. I need to know haw far the frame bracket hangs the tubing below the frame rails, How far down the bend drops the pad mount, and how far the pad mount extends out from the tubing. If anybody has one and could give me these measurements I would greatly appreciate it.
thanks, Andrew
__________________
'67 Chevy Longbed Fleetside - Daily Driver(For Now) '72 Cheyene Longbed Fleetside-Daily Driver Best Towing Service |
06-30-2008, 04:16 PM | #2 |
Registered User
Join Date: Sep 2006
Location: thousand oaks, California
Posts: 732
|
Re: CPP Transmission Crossmember
there pretty felexible i got mine from brothers and the are on a rotating tube and the brackets can be flipped. probably the simplest part i've installed look at my build i should have some picts
GT
__________________
Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5 |
07-01-2008, 07:01 PM | #3 |
Registered User
Join Date: Feb 2000
Location: Temple, Texas
Posts: 325
|
Re: CPP Transmission Crossmember
Thanks for the pictures, Andrew
__________________
'67 Chevy Longbed Fleetside - Daily Driver(For Now) '72 Cheyene Longbed Fleetside-Daily Driver Best Towing Service |
06-30-2010, 05:48 AM | #4 | |
Registered User
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
|
Re: CPP Transmission Crossmember
Quote:
Thanks
__________________
Long live SLIM ------------------ At least try to buy American |
|
06-30-2010, 07:19 AM | #5 |
Yellow truck club
Join Date: Apr 2006
Location: Barrie Ontario
Posts: 2,080
|
Re: CPP Transmission Crossmember
Did you try to get the info thru Jeff our contact at CPP?
__________________
................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW 59 Chev Apache PRAISE THE LOWERED 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited |
06-30-2010, 01:10 PM | #6 |
Registered User
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
|
Re: CPP Transmission Crossmember
show me the way! Im stumped.
__________________
Long live SLIM ------------------ At least try to buy American |
07-01-2010, 10:45 PM | #7 |
Registered User
Join Date: May 2006
Location: Santa Fe,Texas
Posts: 933
|
Re: CPP Transmission Crossmember
Did you find what you are looking for? Does it look like this? I don't know if this will help or not. I won't be able to measure it until Monday at the earliest. Let me know.
Bernie |
07-02-2010, 01:22 PM | #8 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,709
|
Re: CPP Transmission Crossmember
If it's the CP9424 it looks like it might drop down about three or less inches below the frame rail. If you are running the stock running board brackets I don't think you would come close to having a problem.
|
07-02-2010, 01:45 PM | #9 | |
Registered User
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
|
Re: CPP Transmission Crossmember
Quote:
Mr48chevy I was asking cause I needed to know that the crossmember would not touchdown before the runningboards. Thanks
__________________
Long live SLIM ------------------ At least try to buy American |
|
Bookmarks |
|
|