bagging a square body dually burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87 dually burb · 07-09-2008, 11:14 PM

little back ground 87 3/4ton 454/400
flipped in rear with 3" blocks (pulled over load leaf)
pulled springs and bump stops in front
still have to add 3" djm spindle

pic of rear before blocks added

front no springs or bump stops 2" to innerfender well

only full pic I have rite now will be on wheels tomorrow

what kind of lift can I get from a bag in the front running 3" spindles
going to add 1" bump stop for it to sit on when airred out in front

rear I want a bag over axle setup same ? what lift can I get with it
same 1" bump stop to rest when airred out

never bagged or dropped a truck this low my biggest issue is I want a good ride and plan to make many trips up and down the east coast with it
want a cheap but reliable set up for now just want to "t" the air line and run them to rear so a full air kit it out the pic for now just want bags and brackets and cups I guess
have 2 40lb co2 bottle for later use

Twistedsteel · 07-10-2008, 12:45 AM

I've never seen one of those. Is that factory?

**scotts62** · 07-10-2008, 07:25 AM

WOW, thats different.. I like it!!

87 dually burb · 07-10-2008, 09:57 PM

here it back on the ground for now added blocks and centered axle in well
thinking of cutting out the bracket the front bump stops were mounted on but they have the steering stop on it could get 1.5" more drop in front with a 1" bump stop in place for when it is airred down

GMBowtie79 · 07-11-2008, 12:46 AM

Mines not a dually, I also didn't bag it (yet). Right now I'm running 3" drop spindles 1" drop coils with 1 coil cut off in front and a 6" flip in the back. any lower in the front and it starts hittin the control arms on uneven roads. As it sits right now I don't have any problems driving down the road. I don't like speed bumps they can be a problem. I like the dually Burbs I have seen 2 of them around here over the years that where dropped I think they look *****in good luck with yours.

87 dually burb · 07-11-2008, 07:48 PM

how tall is your front/rear tires??
my 235/85/16"s are tall but havent measured them yet
may change them out later

GMBowtie79 · 07-11-2008, 07:59 PM

The front are 245-40-20 @ 28" and the rear are 265-50-20 @ 30".

Mkcustums · 07-12-2008, 01:24 AM

Inspirational pics....

SBTork · 07-12-2008, 09:41 AM

Very cool dually 'burb with the cowl hood.

Good luck on the project, it looks like it's coming along good, and should be awesome when done.

87 dually burb · 07-12-2008, 03:08 PM

nice I ve been also lookin at a cowl hood but only a 2" or to keep it legal

07-09-2008, 11:14 PM	#1
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	bagging a square body dually burb little back ground 87 3/4ton 454/400 flipped in rear with 3" blocks (pulled over load leaf) pulled springs and bump stops in front still have to add 3" djm spindle pic of rear before blocks added front no springs or bump stops 2" to innerfender well only full pic I have rite now will be on wheels tomorrow what kind of lift can I get from a bag in the front running 3" spindles going to add 1" bump stop for it to sit on when airred out in front rear I want a bag over axle setup same ? what lift can I get with it same 1" bump stop to rest when airred out never bagged or dropped a truck this low my biggest issue is I want a good ride and plan to make many trips up and down the east coast with it want a cheap but reliable set up for now just want to "t" the air line and run them to rear so a full air kit it out the pic for now just want bags and brackets and cups I guess have 2 40lb co2 bottle for later use __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

07-10-2008, 12:45 AM	#2
Twistedsteel Registered User Join Date: Feb 2005 Location: Redway, Ca Posts: 97	Re: bagging a square body dually burb I've never seen one of those. Is that factory?

07-10-2008, 07:25 AM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: bagging a square body dually burb WOW, thats different.. I like it!! __________________ Scott 93 crew cab build Project 62

07-10-2008, 09:57 PM	#4
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: bagging a square body dually burb here it back on the ground for now added blocks and centered axle in well thinking of cutting out the bracket the front bump stops were mounted on but they have the steering stop on it could get 1.5" more drop in front with a 1" bump stop in place for when it is airred down __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

07-11-2008, 12:46 AM	#5
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: bagging a square body dually burb Mines not a dually, I also didn't bag it (yet). Right now I'm running 3" drop spindles 1" drop coils with 1 coil cut off in front and a 6" flip in the back. any lower in the front and it starts hittin the control arms on uneven roads. As it sits right now I don't have any problems driving down the road. I don't like speed bumps they can be a problem. I like the dually Burbs I have seen 2 of them around here over the years that where dropped I think they look ****in good luck with yours. __________________ 79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project" Last edited by GMBowtie79; 07-11-2008 at 12:50 AM.*

07-11-2008, 07:48 PM	#6
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: bagging a square body dually burb how tall is your front/rear tires?? my 235/85/16"s are tall but havent measured them yet may change them out later __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

07-11-2008, 07:59 PM	#7
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: bagging a square body dually burb The front are 245-40-20 @ 28" and the rear are 265-50-20 @ 30". __________________ 79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project"

07-12-2008, 01:24 AM	#8
Mkcustums Registered User Join Date: Oct 2007 Location: Wilsonville Or Posts: 705	Re: bagging a square body dually burb Inspirational pics.... Attached Images

07-12-2008, 09:41 AM	#9
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: bagging a square body dually burb Very cool dually 'burb with the cowl hood. Good luck on the project, it looks like it's coming along good, and should be awesome when done. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

07-12-2008, 03:08 PM	#10
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: bagging a square body dually burb nice I ve been also lookin at a cowl hood but only a 2" or to keep it legal __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.