Pics and specs of lifted blazers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972CST · 07-14-2008, 03:33 PM

I have a good idea of how much I want to lift my blazer thanks to a few members in an earlier post. Lets see some lifted blazers w/ specs!

LUV2XCLR8 · 07-14-2008, 04:06 PM

Well for just a few more months it will look like this

4/6 Spring Lift (Offset to counter top weight, no rear sag)
No body lift, and 35 x 12.5 x 15's on 8" Rally's. Doesn't rub
for street cruising but would rub if you were to wheel it

bouncytruck · 07-14-2008, 04:24 PM

4" of lift, stock 16" wheels and P235/85R16 tires (approx 31.5" tall)

a few more in the signature link...

Long Roof · 07-14-2008, 05:13 PM

I *think* I have 6" spring lift (installed by previous owner) with 36x12.50x15's (34 3/4" tall) & 4.56 gears.

1tonblaze · 07-14-2008, 06:36 PM

Here is a pic of mine . it started out with 4 inch springs with 4 inch blocks in the rear with broken leaf packs . I took all that out threw it all away got new 6 inch springs for the front with ORD shackels and shackel hangers for a total of 7 inches in the front . the rear is the ORD shackel flip kit with 3 inch rear springs and a one inch zero rate block to recenter the axle and that is for a total of 8 inches . The axles are a 3/4 dana 44 with 4:10 gears and the rear is a 1 ton 14bolt with 4:10 gears . The tires i have on it now are 36/14.50/16 on 16x10 procomp rims . also there is a one inch body lift in the truck to from ORD so the total lift is around 9 + inches give or take .

bigbadchev72 · 07-14-2008, 07:10 PM

Heres mine, 8" 73-87gm front springs,8" rear shackles, 1" zerorate, rear 6" springs and 3" block. 38x14.5x16 toyo m/ts on polished 16x10 rock crusher wheels. The ones with the boggers are 35" x16x15 on 15x10 white spoke 8lug rims.

**Matt's k5** · 07-14-2008, 07:28 PM

2 inch in front and custom3 inch blocks in rear whant to do 4 inch all spring lift some day

vtblazer · 07-14-2008, 08:51 PM

Quote:

Originally Posted by 1972CST

I have a good idea of how much I want to lift my blazer thanks to a few members in an earlier post. Lets see some lifted blazers w/ specs!

Couple pages of good reading for ya, welcome to the board.

http://67-72chevytrucks.com/vboard/s...archid=1285837

1972CST · 07-14-2008, 10:53 PM

VT, I could not get that link to work?

1972CST · 07-14-2008, 10:57 PM

bigbadchev72, Do you know any details to use 73-87 front springs? That is one sharp truck!

bigbadchev72 · 07-14-2008, 11:09 PM

Quote:

Originally Posted by 1972CST

bigbadchev72, Do you know any details to use 73-87 front springs? That is one sharp truck!

Not too much too it really, just bolted thm in place and used some 3/8" flatbar for the rear shackles on the front springs, i have no alignment/caster/front driveline problems running this setup. the thing drives straight and rides nice.

1972CST · 07-14-2008, 11:26 PM

Did you have to move the front spring mount closer to the bumper? Are the73-87 front springs the same width? Thanks for the pics.

1tonblaze · 07-14-2008, 11:37 PM

it looks like me , vtblazer and bigbadchev72 have the tallest blazers in here so far .

bigbadchev72 · 07-14-2008, 11:53 PM

Quote:

Originally Posted by 1972CST

Did you have to move the front spring mount closer to the bumper? Are the73-87 front springs the same width? Thanks for the pics.

nope, they are installed in the stock position front hangers, the only thing i had to do was put the longer shackles in the back of the spring like in the pictures i posted of it to make up for the longer springs, i believe the springs are 2.5" wide as are all aftermarket springs i believe

vtblazer · 07-15-2008, 06:00 AM

Quote:

Originally Posted by 1tonblaze

it looks like me , vtblazer and bigbadchev72 have the tallest blazers in here so far .

6" Alcans and 42's here, with a set of zero rates on the rear and shackle flips.

36"s to the rock sliders and 22"s of ground clearance under the t-case skid.

*no pics of it sittin' still with the 42's on it so you to see the stance/lift, all the pics are of it twisted up or flopped over...

**Yukon Jack** · 07-15-2008, 09:57 AM

Here are a couple pics of my 70 K5 with 4" front Superlift lift springs and the rear is a combination of a 2" block with custom spring perches on a 14 Bolt to level it out. IMO these 4" front springs probably don't measure out to an actual 4" lift - I'd say the have to be closer to 3".

I can't recall the exact height of these tires in the next two pics, I'll have to measure them and then updated this.

And the following are pics while I temporarily have some 35" Super Swamper SSR's on the K5 (they measure closer to 34.5")

epsorenson · 07-15-2008, 03:33 PM

4" lift, 35" tires

johnnywagon · 07-15-2008, 07:43 PM

4" Front springs with home-made 3" lift shackles. 6 " rear springs. 3" body lift. Only 36" tires, for now.

...oh and the most important thing: 8 year old co-pilot!

hellrazrblade · 07-15-2008, 10:47 PM

~6" suspension lift with 3" body lift sitting on 38" Radial TSL's. This made me realize that I need to take more pics of the truck.

bouncytruck · 07-16-2008, 12:29 AM

hellrazrblade - It looks like Big Foot is trying to get friendly with your truck.

fun in dirt · 07-16-2008, 11:19 AM

Quote:

Originally Posted by bigbadchev72

Not too much too it really, just bolted thm in place and used some 3/8" flatbar for the rear shackles on the front springs, i have no alignment/caster/front driveline problems running this setup. the thing drives straight and rides nice.

Maybe it's just me..but that looks kind of scary???

hellrazrblade · 07-17-2008, 06:49 PM

Quote:

Originally Posted by bouncytruck

hellrazrblade - It looks like Big Foot is trying to get friendly with your truck.

Didn't you know? He's attracted to iridescent purple.

bigbadchev72 · 07-17-2008, 07:32 PM

Quote:

Originally Posted by fun in dirt

Maybe it's just me..but that looks kind of scary???

Care to explain?

FRENCHBLUE72 · 07-18-2008, 04:03 PM

6'' lift and 35'' tires....

Jtrux · 07-18-2008, 04:28 PM

Quote:

Originally Posted by bigbadchev72

Care to explain?

I don't see anything wrong with it, 3/8 is plenty strong for that.

07-14-2008, 03:33 PM	#1
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Pics and specs of lifted blazers I have a good idea of how much I want to lift my blazer thanks to a few members in an earlier post. Lets see some lifted blazers w/ specs!

07-14-2008, 04:06 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Pics and specs of lifted blazers Well for just a few more months it will look like this 4/6 Spring Lift (Offset to counter top weight, no rear sag) No body lift, and 35 x 12.5 x 15's on 8" Rally's. Doesn't rub for street cruising but would rub if you were to wheel it Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-14-2008, 04:24 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Pics and specs of lifted blazers 4" of lift, stock 16" wheels and P235/85R16 tires (approx 31.5" tall) a few more in the signature link... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-14-2008, 05:13 PM	#4
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Pics and specs of lifted blazers I think I have 6" spring lift (installed by previous owner) with 36x12.50x15's (34 3/4" tall) & 4.56 gears. Attached Images __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck Last edited by Long Roof; 07-14-2008 at 05:14 PM.

07-14-2008, 06:36 PM	#5
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: Pics and specs of lifted blazers Here is a pic of mine . it started out with 4 inch springs with 4 inch blocks in the rear with broken leaf packs . I took all that out threw it all away got new 6 inch springs for the front with ORD shackels and shackel hangers for a total of 7 inches in the front . the rear is the ORD shackel flip kit with 3 inch rear springs and a one inch zero rate block to recenter the axle and that is for a total of 8 inches . The axles are a 3/4 dana 44 with 4:10 gears and the rear is a 1 ton 14bolt with 4:10 gears . The tires i have on it now are 36/14.50/16 on 16x10 procomp rims . also there is a one inch body lift in the truck to from ORD so the total lift is around 9 + inches give or take . Attached Images __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht . Last edited by 1tonblaze; 07-14-2008 at 06:38 PM. Reason: forgot another inch of lift

07-14-2008, 07:10 PM	#6
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Pics and specs of lifted blazers Heres mine, 8" 73-87gm front springs,8" rear shackles, 1" zerorate, rear 6" springs and 3" block. 38x14.5x16 toyo m/ts on polished 16x10 rock crusher wheels. The ones with the boggers are 35" x16x15 on 15x10 white spoke 8lug rims. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

07-14-2008, 07:28 PM	#7
Matt's k5 BLAZER THIRTY!! Join Date: May 2007 Location: Utah Posts: 325	Re: Pics and specs of lifted blazers 2 inch in front and custom3 inch blocks in rear whant to do 4 inch all spring lift some day Attached Images __________________ 49 chevy 5 window 20 year project (sold)😟 57 ford fairlane (dad's car never got to it before he passed away R.I.P I LOVE YOU DAD.) 62 GMC 305 V6 custom L/B 72 HIGHLANDER K5 BLAZER 2nd owner 71 K5 MAMMA'S RIDE! 63 GMC 4X4 305 V6 62 GMC SHORT BED SERVICE BODY V6 (STUMPY) 74 GMC CUSTOM 1500 L/B

07-14-2008, 10:53 PM	#9
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Pics and specs of lifted blazers VT, I could not get that link to work?

07-14-2008, 10:57 PM	#10
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Pics and specs of lifted blazers bigbadchev72, Do you know any details to use 73-87 front springs? That is one sharp truck!

07-14-2008, 11:26 PM	#12
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Pics and specs of lifted blazers Did you have to move the front spring mount closer to the bumper? Are the73-87 front springs the same width? Thanks for the pics.

07-14-2008, 11:37 PM	#13
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: Pics and specs of lifted blazers it looks like me , vtblazer and bigbadchev72 have the tallest blazers in here so far . __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

07-15-2008, 09:57 AM	#16
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Pics and specs of lifted blazers Here are a couple pics of my 70 K5 with 4" front Superlift lift springs and the rear is a combination of a 2" block with custom spring perches on a 14 Bolt to level it out. IMO these 4" front springs probably don't measure out to an actual 4" lift - I'd say the have to be closer to 3". I can't recall the exact height of these tires in the next two pics, I'll have to measure them and then updated this. And the following are pics while I temporarily have some 35" Super Swamper SSR's on the K5 (they measure closer to 34.5") __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 07-15-2008 at 10:11 AM.

07-15-2008, 03:33 PM	#17
epsorenson Registered User Join Date: Sep 2007 Location: placentia, california Posts: 165	Re: Pics and specs of lifted blazers 4" lift, 35" tires Attached Images __________________ "Some days you're the bug....Some days you're the windshield" *71 Blazer K5*

07-15-2008, 07:43 PM	#18
johnnywagon Sofa King. We, Todd, Ed. Join Date: Oct 2006 Location: Spokane, Wa. Posts: 631	Re: Pics and specs of lifted blazers 4" Front springs with home-made 3" lift shackles. 6 " rear springs. 3" body lift. Only 36" tires, for now. ...oh and the most important thing: 8 year old co-pilot! Attached Images __________________ ~John 71 Blazer One Ton 65 Chevelle Station Wagon x2 59 Belair 2 Door 71 Chevy Open Road Van RV www.myspace.com/johnnywagon Last edited by johnnywagon; 07-15-2008 at 07:44 PM.

07-15-2008, 10:47 PM	#19
hellrazrblade Purple People Eater Join Date: Dec 2006 Location: Houston Posts: 53	Re: Pics and specs of lifted blazers ~6" suspension lift with 3" body lift sitting on 38" Radial TSL's. This made me realize that I need to take more pics of the truck. Attached Images __________________ 1971 K5 Blazer 396ci/TH400/NP205/Dana 44/GM 12 Bolt/38" TSLs 2004 Chevy 1500 4X2 X-Cab 327ci



Register or Log In To remove these advertisements.

07-16-2008, 12:29 AM	#20
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Pics and specs of lifted blazers hellrazrblade - It looks like Big Foot is trying to get friendly with your truck. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-18-2008, 04:03 PM	#24
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Pics and specs of lifted blazers 6'' lift and 35'' tires.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.