WTB or Trade-V6 4X4 Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BobS · 07-20-2008, 05:38 PM

I don't advocate swapping small blocks for V-6s but here's an opportunity for someone who's hell bent on doing it or has already done it. I'm looking for a couple of engine crossmembers and motor mounts for a 67-69 4X4 originally equipped with a V-6. I've got small block parts to trade if desired. Thanks!

Bob

**special-K** · 07-20-2008, 07:26 PM

Cool thread.I hope you get alot of offers.

Spray-Bomb · 07-20-2008, 07:37 PM

I would help you out, but I dont have a 4x4 V-6 powered truck

I was gonna build one tho, but I was gonna use a 88-98 frame & suspension

BobS · 07-22-2008, 10:46 AM

I know there's a couple of these sitting in scrap heaps somewhere!

Bob

*ksjh1316* · 07-22-2008, 11:13 AM

Nice herd you have going on there. I see where all the GMC's have gone

A TTT for another 4 eyed fan

BobS · 07-23-2008, 11:39 PM

Thanks, every so often another one follows me home!

Bob

daves71k5 · 07-24-2008, 12:36 AM

Looks like the only thing you need to complete your collecton is a 67 GMC with the V6 in it, too bad your not closer to Idaho, would make you a good deal on one. Oh well a TTT for ya anyway. Dave

BobS · 07-25-2008, 09:42 AM

Thanks Dave! I'd love to find an all original 67 K1500 or K2500 with power steering. There can't be too many of those running around.

Bob

67_C-30 · 07-26-2008, 12:52 AM

I know you said '67 - '69, but would a '65 have anything you need? I had one and sold it, but I think I could buy it back reasonably. 305E with a SM420 and divorced transfer case.

02_GMC_97_FIII · 07-26-2008, 09:18 AM

Bob-

I don't have one I'm parting however in the event the plow truck I picked up a few months ago doesn't pan out, I'll make sure to let you know.

The V6 definitely has some grunt to it!

BobS · 07-27-2008, 12:02 AM

67 C-30,

I don't know if the crosmember and motor mounts from a 60-66 would be the same, I hadn't even considered it. Any way to get a closer shot of the engine crossmember area? My Panel Truck is a NAPCO so it has a converted 2WD frame, it doesn't have a crossmember at all. That's a pretty cool looking truck, you should get it back and drive it!

02 GMC 97 FIII,

Nice looking truck, I hope it works out for you but let me know if it doesn't. I think you'll find the V-6 is hard to beat in a work truck, you're right, they don't mind grunting a little!

Bob

Erl · 07-31-2008, 01:01 PM

There is a high school kid on here who goes by Jake and lives in Maine. He just swaped a small block in place of the V6 in his 1968 K2500.

Erl

BobS · 08-01-2008, 10:17 AM

Thanks Erl, I'll see if he wants to sell.

Bob

BobS · 08-06-2008, 11:07 AM

Still looking for a couple of these........

Bob

Erl · 08-06-2008, 01:13 PM

This is who I was refering to

JAKES 68GMC

Erl

BobS · 08-06-2008, 02:13 PM

I sent him a PM but it looks like he hasn't posted here in a couple of months.

Bob

BobS · 09-02-2008, 05:53 PM

TTT, still looking...........

Bob

BobS · 09-15-2008, 12:12 AM

Still looking........

Bob

1969stepside · 09-16-2008, 11:34 PM

ttt 4 u

1969stepside · 09-16-2008, 11:34 PM

is it hard to find v-6 rebuild kits for these trucks?

WyoRoadDog · 09-17-2008, 12:03 PM

Depends which engine. The 305 stuff is pretty easy to find, but it starts to get harder for the others.

Quote:

Originally Posted by 1969stepside

is it hard to find v-6 rebuild kits for these trucks?

john@thepier · 09-17-2008, 09:17 PM

I have a mint condition no pits 67 v-6 4x4 engine cross member blasted and epoxy painted then final covered in chasis black ready to go for $100 + the freight to you. Need more info or pictures, pm me. John

1969stepside · 09-17-2008, 09:40 PM

i would like to know all i can about these motors

**special-K** · 09-17-2008, 11:29 PM

You just need a 4wd crossmember,right?Aren`t the engine towers the same?I had some V6 towers set aside once I.D.`d.I`ll see if they are still seperated.I meant to label them.

Kager67 · 09-18-2008, 09:31 PM

My 68 GMC 3/4 ton 4x4 is for sale. It is complete and runs/drives good. It has 305 with 3 spd. I drove it home from Detroit Lakes last winter. I am asking $1400 for it, but it is negotiable. Pics are at home, but I can get them to you if you are interested. Let me know. Thanks

Kager

07-20-2008, 05:38 PM	#1
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	WTB or Trade-V6 4X4 Parts I don't advocate swapping small blocks for V-6s but here's an opportunity for someone who's hell bent on doing it or has already done it. I'm looking for a couple of engine crossmembers and motor mounts for a 67-69 4X4 originally equipped with a V-6. I've got small block parts to trade if desired. Thanks! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-20-2008, 07:26 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB or Trade-V6 4X4 Parts Cool thread.I hope you get alot of offers. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-20-2008, 07:37 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: WTB or Trade-V6 4X4 Parts I would help you out, but I dont have a 4x4 V-6 powered truck I was gonna build one tho, but I was gonna use a 88-98 frame & suspension __________________ Just not low enough... ----------------------------- Sinister Killer

07-22-2008, 10:46 AM	#4
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts I know there's a couple of these sitting in scrap heaps somewhere! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-22-2008, 11:13 AM	#5
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: WTB or Trade-V6 4X4 Parts Nice herd you have going on there. I see where all the GMC's have gone A TTT for another 4 eyed fan

07-23-2008, 11:39 PM	#6
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Thanks, every so often another one follows me home! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-24-2008, 12:36 AM	#7
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: WTB or Trade-V6 4X4 Parts Looks like the only thing you need to complete your collecton is a 67 GMC with the V6 in it, too bad your not closer to Idaho, would make you a good deal on one. Oh well a TTT for ya anyway. Dave

07-25-2008, 09:42 AM	#8
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Thanks Dave! I'd love to find an all original 67 K1500 or K2500 with power steering. There can't be too many of those running around. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

07-26-2008, 12:52 AM	#9
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: WTB or Trade-V6 4X4 Parts I know you said '67 - '69, but would a '65 have anything you need? I had one and sold it, but I think I could buy it back reasonably. 305E with a SM420 and divorced transfer case. Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 07-26-2008 at 12:53 AM.

07-26-2008, 09:18 AM	#10
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: WTB or Trade-V6 4X4 Parts Bob- I don't have one I'm parting however in the event the plow truck I picked up a few months ago doesn't pan out, I'll make sure to let you know. The V6 definitely has some grunt to it! __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP Last edited by 02_GMC_97_FIII; 07-26-2008 at 09:24 AM.

07-27-2008, 12:02 AM	#11
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts 67 C-30, I don't know if the crosmember and motor mounts from a 60-66 would be the same, I hadn't even considered it. Any way to get a closer shot of the engine crossmember area? My Panel Truck is a NAPCO so it has a converted 2WD frame, it doesn't have a crossmember at all. That's a pretty cool looking truck, you should get it back and drive it! 02 GMC 97 FIII, Nice looking truck, I hope it works out for you but let me know if it doesn't. I think you'll find the V-6 is hard to beat in a work truck, you're right, they don't mind grunting a little! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel Last edited by BobS; 07-27-2008 at 12:04 AM.

07-31-2008, 01:01 PM	#12
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Re: WTB or Trade-V6 4X4 Parts There is a high school kid on here who goes by Jake and lives in Maine. He just swaped a small block in place of the V6 in his 1968 K2500. Erl __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

08-01-2008, 10:17 AM	#13
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Thanks Erl, I'll see if he wants to sell. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

08-06-2008, 11:07 AM	#14
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Still looking for a couple of these........ Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

08-06-2008, 01:13 PM	#15
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Re: WTB or Trade-V6 4X4 Parts This is who I was refering to JAKES 68GMC Erl __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX



Register or Log In To remove these advertisements.

08-06-2008, 02:13 PM	#16
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts I sent him a PM but it looks like he hasn't posted here in a couple of months. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

09-02-2008, 05:53 PM	#17
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts TTT, still looking........... Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

09-15-2008, 12:12 AM	#18
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	Re: WTB or Trade-V6 4X4 Parts Still looking........ Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

09-16-2008, 11:34 PM	#19
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: WTB or Trade-V6 4X4 Parts ttt 4 u __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

09-16-2008, 11:34 PM	#20
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: WTB or Trade-V6 4X4 Parts is it hard to find v-6 rebuild kits for these trucks? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

09-17-2008, 09:17 PM	#22
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB or Trade-V6 4X4 Parts I have a mint condition no pits 67 v-6 4x4 engine cross member blasted and epoxy painted then final covered in chasis black ready to go for $100 + the freight to you. Need more info or pictures, pm me. John

09-17-2008, 09:40 PM	#23
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: WTB or Trade-V6 4X4 Parts i would like to know all i can about these motors __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

09-17-2008, 11:29 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB or Trade-V6 4X4 Parts You just need a 4wd crossmember,right?Aren`t the engine towers the same?I had some V6 towers set aside once I.D.`d.I`ll see if they are still seperated.I meant to label them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-18-2008, 09:31 PM	#25
Kager67 what knocking sound? Join Date: Feb 2005 Location: good ol North Dakota Posts: 148	Re: WTB or Trade-V6 4X4 Parts My 68 GMC 3/4 ton 4x4 is for sale. It is complete and runs/drives good. It has 305 with 3 spd. I drove it home from Detroit Lakes last winter. I am asking $1400 for it, but it is negotiable. Pics are at home, but I can get them to you if you are interested. Let me know. Thanks Kager __________________ 1968 C-10 1953 belair two-door post 1955 chevy 3600 big window 1950 studebaker starlite coupe 1968 Impala SS

Register or Log In To remove these advertisements.