Who makes center caps for 6 lugs ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 08-26-2008, 10:15 AM

My buddy Rich brought over some 15" rings for the Chief....he was actually running these on his 'rat-rod' Civic.
-
-

-

-
-
Looks ok, but I wonder if I could find a cap that'll work with the six-lug ??

These wheels had the S-10 style dish caps, that grab on the outside.

Any idears ??

**slepysal** · 08-26-2008, 11:09 AM

Hey John howz it ?
Try Davids Rally on Alum Rock. Thats were I got mine ,The truck is looking good .

Joey~AP · 08-26-2008, 01:03 PM

Your truck is one of my favorites......but I like it better w/o the rings.

No offense!

jonzcustomshop · 08-26-2008, 02:28 PM

go to moon equipped and get some bullets that would press through the center hole, it would be a poormans spidercap.

jchav62 · 08-26-2008, 03:37 PM

I like it the way it is. Beauty rings and chrome lug nuts look good. I agree with jon, bullets would look nice too...

original_balzer · 08-26-2008, 07:25 PM

Hub hole bullets FTW! dont hide those 6 lugs

**slepysal** · 08-26-2008, 07:41 PM

John ,you can get "bullet" lug nuts along with a bullet cap to complete the "poor man's" spider cap look
I like the red wheel open look too.
my dos centavos (2 cents )

original_balzer · 08-26-2008, 09:03 PM

http://www.hubcapmike.com/kustom-whe...cessories.html

DOOOOOO ITTTTTTTTT!

64c20crewcab · 08-26-2008, 09:09 PM

I had a set of rallies, not stock steel but 6 lug on my last C10. I used a set of bullet caps. Give StocktonWheel a call to see if these will fit. Good Luck on yer hunt.

TimE · 08-26-2008, 09:25 PM

I have to agree that the bullet caps would set it off with the trim rings on it.

TimE · 08-26-2008, 09:35 PM

Sorry, but I've gotta ask--what exactly is a rat rod Civic?

original_balzer · 08-26-2008, 09:41 PM

Quote:

Originally Posted by TimE

Sorry, but I've gotta ask--what exactly is a rat rod Civic?

HA HA HA I was thinking the same thing!

**ChiefRocka** · 08-27-2008, 09:59 AM

After I installed the rings....I have to be honest and say I like it without the rings. Mabey, I was used to it, bu t you can see more red I guess.

I agree, I don't want to cover the lugs either. Mabey some longer pointed lugs.

Sal, I'm doing good man....

**ChiefRocka** · 08-27-2008, 10:01 AM

Quote:

Originally Posted by TimE

Sorry, but I've gotta ask--what exactly is a rat rod Civic?

Quote:

Originally Posted by original_balzer

HA HA HA I was thinking the same thing!

HA, HA....I knew someone would ask

My buddy has a Black Civic in which he painted the rims red, added some porta-walls, and give it some mild stripes....kinda cool, I guess.

**slepysal** · 08-27-2008, 03:27 PM

Yea that sounds like Rich !!!

**ChiefRocka** · 08-29-2008, 09:35 AM

OK, for all who was wondering...here's my buddys RatRodCivic....
-
-

-
-

jonzcustomshop · 08-29-2008, 10:18 AM

reminds me of the movie- employee of the month...

TimE · 08-29-2008, 06:05 PM

HeHeHe...that's kinda cute. A Herbie Honda in black.

All funnin' aside, that is a clean little car.

NF65Fleetside · 08-30-2008, 03:25 PM

Quote:

Originally Posted by ChiefRocka

OK, for all who was wondering...here's my buddys RatRodCivic....
-
-

-
-

I just threw up in my mouth a lil bit! guh! Dont know if its cause I actually used to race touring cars proffesionally with a Honda hatchback and or just cause I hate cheesy antics....but that was just wrong! lol.

70c-10 · 09-04-2008, 08:24 PM

Did you buy any bullet caps yet? I'm looking for some too:

I would also like to find some 17" beauty rings

**ChiefRocka** · 09-04-2008, 08:52 PM

Not yet...cool truck, why dont you start a thread......

tiggamonsta · 09-04-2008, 11:04 PM

Before you call that civic a ratrod you need to at least dull the paint.

sixtyfour · 09-23-2008, 05:26 PM

Quote:

Originally Posted by original_balzer

http://www.hubcapmike.com/kustom-whe...cessories.html

DOOOOOO ITTTTTTTTT!

I'm looking for bullet caps as well, anyone found any yet? The ones at the link above are 3.25", looks like my wheels center holes are 3.5". If anyone finds some please post up....

64c20crewcab · 09-24-2008, 10:17 AM

Quote:

Originally Posted by sixtyfour

I'm looking for bullet caps as well, anyone found any yet? The ones at the link above are 3.25", looks like my wheels center holes are 3.5". If anyone finds some please post up....

I'm headed out to Hubcap Mikes later today. Only bout 10 miles from me. Will be grabbin 36 (40 actually - sold in packs of 5) of the bullet lug nuts for my 8-lugger rig. Will see what for bullet caps they have available for you 1/2 ton guys.

Are you guy are lookin for push through caps or???

btw, here are a few links I found when searchin for push through caps/bullet for my rig:

http://www.wirthscustomauto.com/bullets.html

http://www.go-kat-go.com/larsteelchro.html

Bullets on a 8 lugger would require a mod of a push throught pre 86' - 4.9" diameter cap and a welded on 4.75" diameter bullet cap. I drafter this into AutoCAD and came up with a pretty neat but large bullet. Other mods such as shortening the push throught cap at the base would be required. Still debating on if its really worth the effort...

Will post what I find out a from hubcap mikes later today.

sixtyfour · 09-24-2008, 10:45 AM

I think I found what we need at MoonEyes, the base is 3.5" push through cap. I ordered one to see if it would work, I'll report back once I get it.

https://www.mooneyesusa.com/Store/pr...07cd14258d7672

08-26-2008, 10:15 AM	#1
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Who makes center caps for 6 lugs ?? My buddy Rich brought over some 15" rings for the Chief....he was actually running these on his 'rat-rod' Civic. - - - - - - Looks ok, but I wonder if I could find a cap that'll work with the six-lug ?? These wheels had the S-10 style dish caps, that grab on the outside. Any idears ?? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 08-26-2008 at 10:17 AM.

08-26-2008, 11:09 AM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Who makes center caps for 6 lugs ?? Hey John howz it ? Try Davids Rally on Alum Rock. Thats were I got mine ,The truck is looking good . __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-26-2008, 01:03 PM	#3
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: Who makes center caps for 6 lugs ?? Your truck is one of my favorites......but I like it better w/o the rings. No offense! __________________ Build in progress for son's first truck.

08-26-2008, 02:28 PM	#4
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Who makes center caps for 6 lugs ?? go to moon equipped and get some bullets that would press through the center hole, it would be a poormans spidercap.

08-26-2008, 03:37 PM	#5
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Who makes center caps for 6 lugs ?? I like it the way it is. Beauty rings and chrome lug nuts look good. I agree with jon, bullets would look nice too... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

08-26-2008, 07:25 PM	#6
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: Who makes center caps for 6 lugs ?? Hub hole bullets FTW! dont hide those 6 lugs __________________ -61 c10 short step -67 c10 short step -71 k10 long fleet -77 k20 long fleet (gettin all the goodies from frankentruck) -79 c30/k30 3+3 frankentruck (cab and frame for sale) -99 GMC yukon daily driver

08-26-2008, 07:41 PM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Who makes center caps for 6 lugs ?? John ,you can get "bullet" lug nuts along with a bullet cap to complete the "poor man's" spider cap look I like the red wheel open look too. my dos centavos (2 cents ) __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-26-2008, 09:03 PM	#8
original_balzer Registered User Join Date: May 2008 Location: roosevelt utah Posts: 325	Re: Who makes center caps for 6 lugs ?? http://www.hubcapmike.com/kustom-whe...cessories.html DOOOOOO ITTTTTTTTT! __________________ -61 c10 short step -67 c10 short step -71 k10 long fleet -77 k20 long fleet (gettin all the goodies from frankentruck) -79 c30/k30 3+3 frankentruck (cab and frame for sale) -99 GMC yukon daily driver

08-26-2008, 09:09 PM	#9
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Who makes center caps for 6 lugs ?? I had a set of rallies, not stock steel but 6 lug on my last C10. I used a set of bullet caps. Give StocktonWheel a call to see if these will fit. Good Luck on yer hunt. __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

08-26-2008, 09:25 PM	#10
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Who makes center caps for 6 lugs ?? I have to agree that the bullet caps would set it off with the trim rings on it.

08-26-2008, 09:35 PM	#11
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Who makes center caps for 6 lugs ?? Sorry, but I've gotta ask--what exactly is a rat rod Civic?

08-27-2008, 09:59 AM	#13
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Who makes center caps for 6 lugs ?? After I installed the rings....I have to be honest and say I like it without the rings. Mabey, I was used to it, bu t you can see more red I guess. I agree, I don't want to cover the lugs either. Mabey some longer pointed lugs. Sal, I'm doing good man.... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-27-2008, 03:27 PM	#15
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Who makes center caps for 6 lugs ?? Yea that sounds like Rich !!! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-29-2008, 09:35 AM	#16
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Who makes center caps for 6 lugs ?? OK, for all who was wondering...here's my buddys RatRodCivic.... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-29-2008, 10:18 AM	#17
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Who makes center caps for 6 lugs ?? reminds me of the movie- employee of the month...



Register or Log In To remove these advertisements.

08-29-2008, 06:05 PM	#18
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Who makes center caps for 6 lugs ?? HeHeHe...that's kinda cute. A Herbie Honda in black. All funnin' aside, that is a clean little car.

09-04-2008, 08:24 PM	#20
70c-10 Registered User Join Date: Oct 2005 Location: redlands, ca Posts: 112	Re: Who makes center caps for 6 lugs ?? Did you buy any bullet caps yet? I'm looking for some too: I would also like to find some 17" beauty rings __________________ 6 in a row, makes it go!!! My Car '88 SWB Daily Driver Last edited by 70c-10; 09-04-2008 at 08:25 PM.

09-04-2008, 08:52 PM	#21
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Who makes center caps for 6 lugs ?? Not yet...cool truck, why dont you start a thread...... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-04-2008, 11:04 PM	#22
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Who makes center caps for 6 lugs ?? Before you call that civic a ratrod you need to at least dull the paint.

09-24-2008, 10:45 AM	#25
sixtyfour Zombie Killer Join Date: Dec 2007 Location: Texas Posts: 317	Re: Who makes center caps for 6 lugs ?? I think I found what we need at MoonEyes, the base is 3.5" push through cap. I ordered one to see if it would work, I'll report back once I get it. https://www.mooneyesusa.com/Store/pr...07cd14258d7672 __________________ 1964 C10 Long Step

Register or Log In To remove these advertisements.