The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-12-2008, 10:24 PM   #1
71 super
Registered User
 
71 super's Avatar
 
Join Date: Sep 2005
Location: Canton North carolina
Posts: 3,080
Unhappy D44 question an help

I started reassembling my D44 this afternoon and ran into a problem. After installing the spring and the drive dog gears??, started to install the "C" clip that holds this portion togetheron the axle shaft, but the groove in the stub shaft is just barely visable, not enough for the clip to go into. I could not get the hub to go back any further, am I missing something, if so what do I need to do to get the clip into place?? Thanks, Harold
__________________
67 blue step side- bb
68 gold and white swb cst anniversary
68 custom swb hot rod Ls swap
69 swb cst 6 cylinder/ overdrive
69 black/black cst bb swb
70 orange and white cst Canada built truck swb bb
71 black and white super swb bb
71 red and white super swb
72 green and white super swb 4x4
62 nova wagon 400 series Ls swapped
68 Camaro 327/4 speed- 1 owner, original paint
66 Volkswagen bettle
69 auto stick Volkswagen Beetle
71 super is offline   Reply With Quote
Old 10-12-2008, 10:43 PM   #2
jerry moss
Born Psycho
 
jerry moss's Avatar
 
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,949
Re: D44 question an help

reach around on the back side and push the axle shaft outward. that has happened to me several times over the years and a little push always works for me.
__________________
jerry moss
72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD
69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies.
73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog.
77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW
BRENTWOOD,CALIFORNIA
jerry moss is offline   Reply With Quote
Old 10-12-2008, 11:01 PM   #3
71 super
Registered User
 
71 super's Avatar
 
Join Date: Sep 2005
Location: Canton North carolina
Posts: 3,080
Re: D44 question an help

Will do Thank you! Harold
__________________
67 blue step side- bb
68 gold and white swb cst anniversary
68 custom swb hot rod Ls swap
69 swb cst 6 cylinder/ overdrive
69 black/black cst bb swb
70 orange and white cst Canada built truck swb bb
71 black and white super swb bb
71 red and white super swb
72 green and white super swb 4x4
62 nova wagon 400 series Ls swapped
68 Camaro 327/4 speed- 1 owner, original paint
66 Volkswagen bettle
69 auto stick Volkswagen Beetle
71 super is offline   Reply With Quote
Old 10-13-2008, 07:57 AM   #4
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: D44 question an help

If that doesn't work (usually does) someone installed Ford shafts in your Chevy housing.
FormerMember is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com