|
|
|
10-12-2008, 10:55 PM
|
#1 |
|
Born Psycho
 
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,948
|
Dana 44 posi question
i picked up a posi carrier out of a 67 GMC 2wd with a dana 44 rear end. will this carrier interchange with my dana 44 front axle under my 72 K/20. GMC has 3:07s and my 72 has a later 44 with 3:73s. i've tried the axle shafts and they seem to be a perfect fit into the side gears. come on 4x4 guru's, someone has to know the answer to this. i think it'll work but i'd like to know for sure before i gut my front diff.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 10-13-2008 at 09:19 AM. Reason: added info |
|
|
|
10-13-2008, 09:44 AM
|
#2 |
|
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Dana 44 posi question
Most likly it will fit fine. I have never worked on a D44 rear so I can't say for sure.
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks 
|
|
|
|
|
10-14-2008, 02:36 AM
|
#3 |
|
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
Re: Dana 44 posi question
The carrier break on a 44 is 3.92 and down, so there it will work. But I don't think it will work cause the 67 might be course spline, and the front is a fine spline. Pull a shaft from the rear and see how many splines, if it's 30, then it will work in your front.
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
|
|
|
|
10-14-2008, 08:59 AM
|
#4 |
|
Born Psycho
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,948
|
Re: Dana 44 posi question
thanks for the replies. i've already tested my axles and they seem to be a perfect fit. it's been a while since i looked at it so i'll double check before i tear my front diff apart.
so, it's safe to assume that a 44 "pumpkin" is the same whether it's a front or rear diff, they just got different cut gears depending on application-front or rear.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
