1960 SB body mouldings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72bigred · 11-16-2008, 01:39 PM

Hi all,

I know I might be searching for the impossible, my wife recently saw a 60 with the side trim and loved it.. I figured I would start my search now and I might be able to get a set by the time I am dead.. I dont see anyone reproducing it for the early 60's although I may not be looking in the right place. If anyone could point me to some I would greatly appreciate it.

Thanks

Skez

62 short step · 11-16-2008, 01:54 PM

Good luck. Its not reproduced, and very hard to find. If I see some I'll keep you in mind. Last time I saw some, it was on ebay and very expensive.

502tripower · 11-16-2008, 03:02 PM

Just something to drool over....I do know where there is one and stopped and talked with the owners mother (sitting in her yard). She said he was interested in selling but you would have to buy the whole truck. I will check on it in the next couple of weeks. Its about 80 miles form me.

Chevysdominate · 11-17-2008, 12:20 AM

The arrowhead trim package is a bit hard to get a hold of. I bought a 61 from southern Oregon just for the complete trim package. Unfortunately its a long bed and so I've been looking for the shortbed pieces over the last year or so. All i need now is the drive side long bed piece and the lower passenger bed spear. Although I've contemplated getting the longbed pieces shortened when i get the whole set restored. The latter options seems like a lot of trouble but ill do it if i have to. Good luck with your search.

11-16-2008, 01:39 PM	#1
72bigred Registered User Join Date: Jan 2008 Location: Spokane WA Posts: 254	1960 SB body mouldings Hi all, I know I might be searching for the impossible, my wife recently saw a 60 with the side trim and loved it.. I figured I would start my search now and I might be able to get a set by the time I am dead.. I dont see anyone reproducing it for the early 60's although I may not be looking in the right place. If anyone could point me to some I would greatly appreciate it. Thanks Skez

11-16-2008, 01:54 PM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 1960 SB body mouldings Good luck. Its not reproduced, and very hard to find. If I see some I'll keep you in mind. Last time I saw some, it was on ebay and very expensive. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

11-16-2008, 03:02 PM	#3
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: 1960 SB body mouldings Just something to drool over....I do know where there is one and stopped and talked with the owners mother (sitting in her yard). She said he was interested in selling but you would have to buy the whole truck. I will check on it in the next couple of weeks. Its about 80 miles form me. Attached Images __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

11-17-2008, 12:20 AM	#4
Chevysdominate Registered User Join Date: Jul 2006 Location: Springtucky, Oregon Posts: 265	Re: 1960 SB body mouldings The arrowhead trim package is a bit hard to get a hold of. I bought a 61 from southern Oregon just for the complete trim package. Unfortunately its a long bed and so I've been looking for the shortbed pieces over the last year or so. All i need now is the drive side long bed piece and the lower passenger bed spear. Although I've contemplated getting the longbed pieces shortened when i get the whole set restored. The latter options seems like a lot of trouble but ill do it if i have to. Good luck with your search.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.