Anyone runnin 2 1/2" ram horn exhaust manifolds? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northern 85 · 12-16-2008, 10:00 PM

Wondering how they will work on a 64 c-10 2wd 700r4.Speedway has them in there cat, they dump straight down.Any info or pics would be helpfull

2manyprojects · 12-16-2008, 10:06 PM

I had a set on a 66 I used to have. They worked fine, just had the exhaust shop make head pipes to clear everything.

northern 85 · 12-16-2008, 10:13 PM

Thanks,any pics of the 65 panel?

2manyprojects · 12-16-2008, 10:28 PM

Quote:

Originally Posted by northern 85

Thanks,any pics of the 65 panel?

Here's some from around 99 right after it was taken off the road.

Rogue · 12-17-2008, 12:15 AM

I have a set for my '64.
came on my '65 Vette 327.
Ran awesome with the double humpers.
That is now going to power the truck.

protrash64 · 12-17-2008, 12:20 AM

My 'burb has them on it; PO installed. They fit and I have the 700r4 also. There are no clearance issues anywhere that I can think of at the moment. I even rewired my starter solenoid from the hood side!

northern 85 · 12-17-2008, 06:28 AM

Thanks guys, noone with pictures?

62 short step · 12-17-2008, 08:59 AM

I'll get some pics today of mine. Its going to be on a 4x4 though, with a 700 r4.

MacAttack · 12-17-2008, 11:44 AM

Here's the 283 with my exhaust - are these what you're talking about? This motor's from a 65' Chevelle - going in a 65' C-10 and according to all the measurements I've made this intallation looks like a breeze.

protrash64 · 12-17-2008, 02:02 PM

Heres some pics of mine installed in truck.....hard to see but thats kinda the point, lots of space for other stuff. On passenger side you can see the pipe running straight back below the heater fan housing

marshtric · 12-17-2008, 02:37 PM

I had to ditch the original exhaust manifolds for two reasons: first they were smog busters and had the air injectors in them and second the passenger side manifold exited into the firewall.

northern 85 · 12-17-2008, 10:29 PM

Thanks guys looks like we might be ordering a set from the speedway cat

northern 85 · 12-19-2008, 06:38 AM

59.99 from speedway. Sound like a good deal?

Name: 9300327_R.jpg
Views: 1481
Size: 3.9 KB

Rogue · 12-19-2008, 12:11 PM

I think those are cast in China.

If I was buying aftermarket, I'd get these. They just look so much better.

protrash64 · 12-19-2008, 01:49 PM

Hey Rogue, if they're cast in China they're probably a crushed up American car anyway

!

joe231 · 12-19-2008, 02:08 PM

Quote:

Originally Posted by Rogue

I think those are cast in China.

If I was buying aftermarket, I'd get these. They just look so much better.

those just look wrong to me......

We have the factory rams horn on our 66
pics tonight...

MacAttack · 12-19-2008, 04:25 PM

Quote:

Originally Posted by joe231

those just look wrong to me......

MOPAR looking. Not right.

northern 85 · 12-20-2008, 10:04 AM

So where would you buy yours?

northern 85 · 12-20-2008, 10:10 AM

Mac your setup looks great,was it bought as a kit? Hardware?

Hoffman65burb · 12-20-2008, 03:37 PM

headers imo

northern 85 · 12-20-2008, 03:48 PM

Headers are what we have, looking to tone her down some

Oklahoma · 12-20-2008, 05:25 PM

Here are the ones on my truck, I have had them on for about 2 years, and i love them, no leaks...

northern 85 · 12-20-2008, 05:37 PM

Looks like one dumps straight down and the other angeled back?

msgross · 12-20-2008, 05:42 PM

Here are some 2 1/2" for $61 each

http://www.performanceexhaustplus.co.../specials.aspx

northern 85 · 12-20-2008, 08:03 PM

Thanks they look nice and priced right too

12-16-2008, 10:00 PM	#1
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Anyone runnin 2 1/2" ram horn exhaust manifolds? Wondering how they will work on a 64 c-10 2wd 700r4.Speedway has them in there cat, they dump straight down.Any info or pics would be helpfull

12-16-2008, 10:06 PM	#2
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? I had a set on a 66 I used to have. They worked fine, just had the exhaust shop make head pipes to clear everything. __________________ 65 Chevy C10 Panel http://67-72chevytrucks.com/vboard/s....php?p=7148391 42 Chevy 3100http://67-72chevytrucks.com/vboard/s...92#post7184392 96 GMC K2500 Diesel Suburban 89 GTA Trans Am Convertible.

12-16-2008, 10:13 PM	#3
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Thanks,any pics of the 65 panel?

12-17-2008, 12:15 AM	#5
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? I have a set for my '64. came on my '65 Vette 327. Ran awesome with the double humpers. That is now going to power the truck. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

12-17-2008, 12:20 AM	#6
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? My 'burb has them on it; PO installed. They fit and I have the 700r4 also. There are no clearance issues anywhere that I can think of at the moment. I even rewired my starter solenoid from the hood side! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

12-17-2008, 06:28 AM	#7
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Thanks guys, noone with pictures?

12-17-2008, 08:59 AM	#8
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? I'll get some pics today of mine. Its going to be on a 4x4 though, with a 700 r4. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20 Last edited by 62 short step; 12-17-2008 at 09:00 AM.

12-17-2008, 11:44 AM	#9
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Here's the 283 with my exhaust - are these what you're talking about? This motor's from a 65' Chevelle - going in a 65' C-10 and according to all the measurements I've made this intallation looks like a breeze. Attached Images __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

12-17-2008, 02:02 PM	#10
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Heres some pics of mine installed in truck.....hard to see but thats kinda the point, lots of space for other stuff. On passenger side you can see the pipe running straight back below the heater fan housing Attached Images __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

12-17-2008, 02:37 PM	#11
marshtric Registered User Join Date: Dec 2008 Location: united states Posts: 3	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? I had to ditch the original exhaust manifolds for two reasons: first they were smog busters and had the air injectors in them and second the passenger side manifold exited into the firewall.

12-17-2008, 10:29 PM	#12
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Thanks guys looks like we might be ordering a set from the speedway cat

12-19-2008, 06:38 AM	#13
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? 59.99 from speedway. Sound like a good deal?

12-19-2008, 12:11 PM	#14
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? I think those are cast in China. If I was buying aftermarket, I'd get these. They just look so much better. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

12-19-2008, 01:49 PM	#15
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Hey Rogue, if they're cast in China they're probably a crushed up American car anyway! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

12-20-2008, 10:04 AM	#18
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? So where would you buy yours?



Register or Log In To remove these advertisements.

12-20-2008, 10:10 AM	#19
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Mac your setup looks great,was it bought as a kit? Hardware?

12-20-2008, 03:37 PM	#20
Hoffman65burb Registered User Join Date: Jul 2008 Location: Vancouver BC Posts: 448	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? headers imo __________________ 1978 GMC Jimmy 454bbc Turbo400 NP205 3.73 gears 4inch lift 33's

12-20-2008, 03:48 PM	#21
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Headers are what we have, looking to tone her down some

12-20-2008, 05:25 PM	#22
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Here are the ones on my truck, I have had them on for about 2 years, and i love them, no leaks... Attached Images

12-20-2008, 05:37 PM	#23
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Looks like one dumps straight down and the other angeled back?

12-20-2008, 05:42 PM	#24
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Here are some 2 1/2" for $61 each http://www.performanceexhaustplus.co.../specials.aspx __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-20-2008, 08:03 PM	#25
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Anyone runnin 2 1/2" ram horn exhaust manifolds? Thanks they look nice and priced right too

Register or Log In To remove these advertisements.