My Wrecked '62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LuckyHenriksen · 12-21-2008, 10:41 PM

Some of you might have already seen this, but I want to post pics in the 60-66 section. I had just got the linkage of the 3 speed figured out, and was on my way to Les Schwab to look at new wheels and tires. There was a big van broke down on the side of the road, and I couldn't see around it when I pulled out. Got T boned right in the middle, I had just filled the gas tank the night before, an Im glad it didn't catch fire. I miss this truck, I need to find another one of this era.

LuckyHenriksen · 12-21-2008, 10:42 PM

joe231 · 12-21-2008, 10:45 PM

yeah, those pics make me sad

LuckyHenriksen · 12-21-2008, 10:47 PM

If you look at the front license plate, you can see it is all smashed up. How did that happen? The rest of the front is straight/not affected by the crash. Oh and BTW the front bumper and grille are for sale =[

62 short step · 12-21-2008, 10:47 PM

Wow!! Hope your ok!

thirdstreettito · 12-21-2008, 10:51 PM

If I were you I would take it ALL apart and salvage anything that is salvageable.

LuckyHenriksen · 12-21-2008, 10:57 PM

Well I sold off the obvious items, passenger door, motor/trans, hood, tail lights, etc. but there was still a lot of good stuff left, all the suspension, inner fenders, rear end, wheels and tires. The tailgate looks straight but it actually got bent pretty bad in the impact. I had it on craigslist for several months, no one wanted any thing else. I didnt know about this board then, or i bet it would have been picked clean. I actually traded the hood for my tailgate and some cash. it was sure fun squeezing the huge hood into my bronco and driving across town =] my head was resting under the front corner! I eventually hauled the carcass to the scrap yard, it was during the big price hike so i got like almost 300 clams out of it. I wish I had parted it out better though

LuckyHenriksen · 12-21-2008, 10:58 PM

Yes I actually escaped with only minor whiplash symptoms and a huge knot on my head

72BlckButy · 12-21-2008, 11:06 PM

First off, I'm glad to hear that you were okay because that looks like quite the hit.

My heart goes out to you though, that was a beautiful truck.

LuckyHenriksen · 12-21-2008, 11:17 PM

Thanks, the truck was great, not very rusty, but the hit showed me how much bondo was under the paint =]

joe231 · 12-21-2008, 11:33 PM

how much for the grill and bumper.....pm me please

LuckyHenriksen · 12-22-2008, 12:08 AM

PM sent

Oregoon · 12-22-2008, 12:11 AM

Lots of C10s on Portland CL. Best of luck!

LuckyHenriksen · 12-22-2008, 12:16 AM

I havent seen any 60-66 lately

Hoffman65burb · 12-22-2008, 12:23 AM

http://seattle.craigslist.org/oly/cto/964065986.html !!!!!!! if your willing to take the drive

LuckyHenriksen · 12-22-2008, 12:27 AM

Damn thats nice! I hate it when you guys post great trucks for sale, I have to think twice about where my money needs to go. Right now I need a super cheap, straight six/3 OTT beater to haul parts for my '68 build! Stuff doesnt fit in the back of my bronco very well, unless I take the top off

MacAttack · 12-22-2008, 12:04 PM

Oh Man, that’s bad news.

The shot of the passenger side was a lot more dramatic. Glad you came out of it okay - there’s always another truck. Same thing happened to me on the way down the hill from Big Bear. Lady playing with the radio crossed over the center line and nailed me right at the gas cap. Same kind of bend - but the driver's side of the bed was up in the air about five feet.

The money from that settlement bought my 65’ Chevelle.

LuckyHenriksen · 12-22-2008, 12:12 PM

I wish I got a settlement out of it, it was technically my fault, even though the van was in my way.

olsofti · 12-22-2008, 01:39 PM

Lucky,I hate to see another great truck lost,glad you're o.k.

Looks like it would have been a good place to put a Ls1!

LuckyHenriksen · 12-22-2008, 02:02 PM

Hey softi! You are over here =] Ya now that I think about it, I should have torn the bed off, cut off the rear frame, and built a custom 3 or 4 link or something

But I guess the cab was a mess too....... I just need another truck!

Hillbilly Deluxe 65 · 12-22-2008, 05:46 PM

sorry to see that man, is the hood for sale?

LuckyHenriksen · 12-22-2008, 06:12 PM

Sorry bro, hood is long gone.

dallas71 · 12-22-2008, 06:14 PM

Man that sucks....!!! Are you interested in selling the fenders?

LuckyHenriksen · 12-22-2008, 06:17 PM

I sold it (the hood) to a guy in Portland who owns Dakota Customs, and he put it on this
Must have added the cowl while I wasnt looking

LuckyHenriksen · 12-22-2008, 06:18 PM

Quote:

Originally Posted by dallas71

Man that sucks....!!! Are you interested in selling the fenders?

Ya it sucks, I would love to sell you the fenders, but I dont have them anymore. The carcass got hauled to the scrap yard cuz my mother was tired of seeing it. I wish I had hidden it from her and kept it longer to sell more parts =[

12-21-2008, 10:41 PM	#1
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	My Wrecked '62 Some of you might have already seen this, but I want to post pics in the 60-66 section. I had just got the linkage of the 3 speed figured out, and was on my way to Les Schwab to look at new wheels and tires. There was a big van broke down on the side of the road, and I couldn't see around it when I pulled out. Got T boned right in the middle, I had just filled the gas tank the night before, an Im glad it didn't catch fire. I miss this truck, I need to find another one of this era. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 10:42 PM	#2
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 10:45 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Wrecked '62 yeah, those pics make me sad __________________ *CHEVY ONLY*

12-21-2008, 10:47 PM	#4
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 If you look at the front license plate, you can see it is all smashed up. How did that happen? The rest of the front is straight/not affected by the crash. Oh and BTW the front bumper and grille are for sale =[ __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 10:47 PM	#5
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: My Wrecked '62 Wow!! Hope your ok! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

12-21-2008, 10:51 PM	#6
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: My Wrecked '62 If I were you I would take it ALL apart and salvage anything that is salvageable. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

12-21-2008, 10:57 PM	#7
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Well I sold off the obvious items, passenger door, motor/trans, hood, tail lights, etc. but there was still a lot of good stuff left, all the suspension, inner fenders, rear end, wheels and tires. The tailgate looks straight but it actually got bent pretty bad in the impact. I had it on craigslist for several months, no one wanted any thing else. I didnt know about this board then, or i bet it would have been picked clean. I actually traded the hood for my tailgate and some cash. it was sure fun squeezing the huge hood into my bronco and driving across town =] my head was resting under the front corner! I eventually hauled the carcass to the scrap yard, it was during the big price hike so i got like almost 300 clams out of it. I wish I had parted it out better though __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here Last edited by LuckyHenriksen; 12-21-2008 at 10:59 PM.

12-21-2008, 10:58 PM	#8
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Yes I actually escaped with only minor whiplash symptoms and a huge knot on my head __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 11:06 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: My Wrecked '62 First off, I'm glad to hear that you were okay because that looks like quite the hit. My heart goes out to you though, that was a beautiful truck. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-21-2008, 11:17 PM	#10
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Thanks, the truck was great, not very rusty, but the hit showed me how much bondo was under the paint =] __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-21-2008, 11:33 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My Wrecked '62 how much for the grill and bumper.....pm me please __________________ *CHEVY ONLY*

12-22-2008, 12:08 AM	#12
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 PM sent __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 12:11 AM	#13
Oregoon Roadside Rebuilder Join Date: Oct 2008 Location: Southeast Portland, OR Posts: 421	Re: My Wrecked '62 Lots of C10s on Portland CL. Best of luck!

12-22-2008, 12:16 AM	#14
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 I havent seen any 60-66 lately __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 12:23 AM	#15
Hoffman65burb Registered User Join Date: Jul 2008 Location: Vancouver BC Posts: 448	Re: My Wrecked '62 http://seattle.craigslist.org/oly/cto/964065986.html !!!!!!! if your willing to take the drive __________________ 1978 GMC Jimmy 454bbc Turbo400 NP205 3.73 gears 4inch lift 33's



Register or Log In To remove these advertisements.

12-22-2008, 12:27 AM	#16
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Damn thats nice! I hate it when you guys post great trucks for sale, I have to think twice about where my money needs to go. Right now I need a super cheap, straight six/3 OTT beater to haul parts for my '68 build! Stuff doesnt fit in the back of my bronco very well, unless I take the top off __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 12:04 PM	#17
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: My Wrecked '62 Oh Man, that’s bad news. The shot of the passenger side was a lot more dramatic. Glad you came out of it okay - there’s always another truck. Same thing happened to me on the way down the hill from Big Bear. Lady playing with the radio crossed over the center line and nailed me right at the gas cap. Same kind of bend - but the driver's side of the bed was up in the air about five feet. The money from that settlement bought my 65’ Chevelle. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

12-22-2008, 12:12 PM	#18
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 I wish I got a settlement out of it, it was technically my fault, even though the van was in my way. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 01:39 PM	#19
olsofti Registered User Join Date: Dec 2007 Location: Cypress Inn.Tn Posts: 135	Re: My Wrecked '62 Lucky,I hate to see another great truck lost,glad you're o.k. Looks like it would have been a good place to put a Ls1!

12-22-2008, 02:02 PM	#20
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Hey softi! You are over here =] Ya now that I think about it, I should have torn the bed off, cut off the rear frame, and built a custom 3 or 4 link or something But I guess the cab was a mess too....... I just need another truck! __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 05:46 PM	#21
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: My Wrecked '62 sorry to see that man, is the hood for sale? __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

12-22-2008, 06:12 PM	#22
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 Sorry bro, hood is long gone. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-22-2008, 06:14 PM	#23
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Re: My Wrecked '62 Man that sucks....!!! Are you interested in selling the fenders? __________________ My 1966 LWB Truck My 1966 SWB Truck

12-22-2008, 06:17 PM	#24
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: My Wrecked '62 I sold it (the hood) to a guy in Portland who owns Dakota Customs, and he put it on this Must have added the cowl while I wasnt looking __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here Last edited by LuckyHenriksen; 12-22-2008 at 06:20 PM.

Register or Log In To remove these advertisements.