WIW: 55-57 large window cab section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 01-10-2009, 12:32 AM

I have a rear cab section that's cut about two feet below the rear window, and the spot welds were drilled out along the roof line. In good shape, no rust through. Any ideas?

**special-K** · 01-10-2009, 10:54 PM

I`d say name your price.What would you figure,about a couple hundred?With glass,right?

HuggerCST · 01-10-2009, 11:25 PM

Quote:

Originally Posted by special-K

I`d say name your price.What would you figure,about a couple hundred?With glass,right?

No I don't have the glass unfortunately.
EDIT: Here are the pics. It isn't quite like I remembered but still pretty good. It has a cut below the glass opening (pic 2, outer section only) around the right side that goes 3/4 of the way across, and has some rust that can be seen in the last pic.

1956cameo · 01-24-2009, 12:06 PM

I don't know what its worth to somebody else, but if you get a price in mind could you PM me I am looking for a section like this to patch my 56 cameo project. If you are going to Pate this spring I could get it from you there. Just let me know. Thanks

1956cameo · 01-30-2009, 11:40 PM

Yes I am still interested. My dad is coming out this weekend. I will ask him if we should attempt to patch my rear window area, or if I should buy this one and patch it in. I will let you know something as soon as he gives me his opinion. Most likely tommorrow.

01-10-2009, 12:32 AM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	WIW: 55-57 large window cab section I have a rear cab section that's cut about two feet below the rear window, and the spot welds were drilled out along the roof line. In good shape, no rust through. Any ideas? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-10-2009, 10:54 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW: 55-57 large window cab section I`d say name your price.What would you figure,about a couple hundred?With glass,right? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-24-2009, 12:06 PM	#4
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: WIW: 55-57 large window cab section I don't know what its worth to somebody else, but if you get a price in mind could you PM me I am looking for a section like this to patch my 56 cameo project. If you are going to Pate this spring I could get it from you there. Just let me know. Thanks

01-30-2009, 11:40 PM	#5
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: WIW: 55-57 large window cab section Yes I am still interested. My dad is coming out this weekend. I will ask him if we should attempt to patch my rear window area, or if I should buy this one and patch it in. I will let you know something as soon as he gives me his opinion. Most likely tommorrow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.