mounting brackets for electric valves

[texastrendz]

just wondering if anyone can post pictures of how you mount the solenoid valves for the air ride suspension. can not find any pics thru the search feature, any help would be great guys. as always thanks again.

[texastrendz]

just wondering if anyone can post pictures of how you mount the solenoid valves for the air ride suspension. can not find any pics thru the search feature, any help would be great guys. as always thanks again.

[N2TRUX]

Here's the set up on my 77 Cheyenne

[texastrendz]

that looks like the way to go for a manifold, the only problem is that i am running the gc extreme valves, manifolds are a cleaner look, but i came across these valves on a good deal. need pics of valves like that if anyone has one, thanks again.

[smashingchuck]

Mine are mounted to the inside of the frame rail in 4 different spots. It's hard to see the bracket, but basically I used some u-bolts from TSC, welded the flanges they came to a piece of 1/8 steel that was bent at 90 degrees (two per each dump/fill) and bolted everything together. I like this method better than using the bolts that are meant to hold the spools together - it's much studier.

[project 67 sub]

nice install

Originally Posted by smashingchuck

Mine are mounted to the inside of the frame rail in 4 different spots. It's hard to see the bracket, but basically I used some u-bolts from TSC, welded the flanges they came to a piece of 1/8 steel that was bent at 90 degrees (three per each dump/fill) and bolted everything together. I like this method better than using the bolts that are meant to hold the spools together - it's much studier.

[Twisted Minis]

I use ASCO valves, and carry brackets for them. It's hard to see them here, but they are a nice easy way to mount the valves.

[Shane]

my SMC valves came with brackets ... sorry, no pics currently though

[jlaird]

mine: