Aluminum SILVERADO emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mekdad · 01-27-2009, 04:00 PM

$55.00 shipped with mounting studs and nuts.These replace the stock one pictured.You can have them in 10,20,30, and with any displacment you want.5.3L,350,502, or what ever.

hessian18 · 01-27-2009, 04:44 PM

Those are pretty trick...

Another cool thing would be to have them anodized then milled out...

It would be a black ano base with the raw aluminum lettering milled out..

Just a thought !!

Good Luck !! Hope to get some someday !!!

pcmcobra · 01-27-2009, 06:02 PM

can't wait for them to get here!
woohoo

rod86 · 01-28-2009, 05:51 AM

ooh theyre hot... im gonna have to get a pair when the funds permit..

baggedcten · 01-29-2009, 12:16 AM

i wish i didnt shave off my emblems

mekdad · 01-29-2009, 09:58 AM

Thanks for the compliments guys.Let me know if you need any other parts made,and we will see what I can do.

mekdad · 02-13-2009, 07:17 PM

ttt

thirdstreettito · 02-13-2009, 10:33 PM

Are they the same price if I want the letters black?

mekdad · 02-18-2009, 08:28 PM

Yes,because you will have to paint them.I dont do the finishing on any of my parts.They are sold right out of the mill or lathe.

mekdad · 03-03-2009, 05:43 PM

ttt

RonnieTheBull · 03-03-2009, 05:49 PM

How about a tailgate band??? Maybe even something custom engraved???

mekdad · 03-03-2009, 05:52 PM

Do you have a pic of that and how it mounts?

RonnieTheBull · 03-03-2009, 05:53 PM

Or maybe even a custom aluminum cluster cover...similar to the ones Covans Classic makes...only to fit over the factory gauges...I was told by Covans that theirs will not work over the factory gauges due to the offset in the back

RonnieTheBull · 03-03-2009, 06:04 PM

Here is a pic I pulled from another thread...the tailgate band sells though LMC for $300+...not sure what it would take for you to make one or if it would even be worth the while cost wise...but I am sure if it was reasonable you would have plenty of taker...especially with the ability to customize it...as far as the mounting of it we will have to wait for someone to chime in...I've never had a truck with one but do planning on putting one on my truck...gotta assume some sort of clip and fastner...or adhesive....

Also is a pic of the gauge cover by Covans..they sell these for $250...love the look of them and they are a great alternative to the billet overlay that is offered on the market...this actually replaces the entire piece...again not sure of whats involved in the making of these or if it would even be worth your while...but if it possible...I am sure you would get plenty of interest

mekdad · 03-03-2009, 06:24 PM

I will look into both of those.The coven dash looks like it is cast if it is aluminum.The tail gate band we might be able to do pretty easy.Depending on what you want engraved I am going to say around $200.00 shipped.

RonnieTheBull · 03-03-2009, 06:28 PM

Quote:

Originally Posted by mekdad

I will look into both of those.The coven dash looks like it is cast if it is aluminum.The tail gate band we might be able to do pretty easy.Depending on what you want engraved I am going to say around $200.00 shipped.

Keep us all informed...that kind of price doesnt sound too hateful at all...I am sure I am not the only one interested in items like these...the emblems look great as well

RonnieTheBull · 03-03-2009, 07:12 PM

Here is another pic of the tail gate band...also the band acroos the bacl of the cab would be another great idea...pics are attached

mekdad · 03-03-2009, 07:52 PM

Just keep in mind that I dont do bending and forming,just mill and lathe work.

pcmcobra · 03-03-2009, 09:16 PM

As soon as I get the 6.0 badges on I will post the pics..
just been too lazy.
Whoever buys them from mekdad will not be disappointed, they are top notch!

RonnieTheBull · 03-04-2009, 02:20 AM

Quote:

Originally Posted by mekdad

Just keep in mind that I dont do bending and forming,just mill and lathe work.

Gotcha...well I guess they may cause a problem then to get the items to function and look properly...keep us informed of your R&D......but again your items look great !!!

rod86 · 03-14-2009, 02:49 AM

would you be able to make grille pieces? i want a middle bar for my phantom grille, like the one on the black/silver pic. but more like the stock center bar with a recess milled into it so it can be painted same colour as the body and have the raised outer edges.

Eighty-6 · 06-15-2011, 10:35 PM

Quote:

Originally Posted by mekdad

$55.00 shipped with mounting studs and nuts.These replace the stock one pictured.You can have them in 10,20,30, and with any displacment you want.5.3L,350,502, or what ever.

I need to order a set in a hurry, pm me paypal address 10 Silverado 5.7 is what I'm looking for. My truck is out of paint and those originals aren't gonna cut it!!

bigblock73 · 06-15-2011, 11:26 PM

you might want to PM him, this thread is 2+ years old

Eighty-6 · 06-16-2011, 12:12 AM

Quote:

Originally Posted by bigblock73

you might want to PM him, this thread is 2+ years old

I did but his mailbox is full, not a good sign I guess :-(

UKNOWME · 04-19-2015, 12:30 AM

Wonder what happened to this guy?

01-27-2009, 04:00 PM	#1
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Aluminum SILVERADO emblems $55.00 shipped with mounting studs and nuts.These replace the stock one pictured.You can have them in 10,20,30, and with any displacment you want.5.3L,350,502, or what ever. Attached Images __________________ you never know what you can do until you have to undo something you have done!

01-27-2009, 04:44 PM	#2
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: Aluminum SILVERADO emblems Those are pretty trick... Another cool thing would be to have them anodized then milled out... It would be a black ano base with the raw aluminum lettering milled out.. Just a thought !! Good Luck !! Hope to get some someday !!! __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

01-27-2009, 06:02 PM	#3
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Aluminum SILVERADO emblems can't wait for them to get here! woohoo __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

01-28-2009, 05:51 AM	#4
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Aluminum SILVERADO emblems ooh theyre hot... im gonna have to get a pair when the funds permit.. __________________ rod 86 chevy c10 silverado

01-29-2009, 12:16 AM	#5
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: Aluminum SILVERADO emblems i wish i didnt shave off my emblems __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold

01-29-2009, 09:58 AM	#6
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems Thanks for the compliments guys.Let me know if you need any other parts made,and we will see what I can do. __________________ you never know what you can do until you have to undo something you have done!

02-13-2009, 07:17 PM	#7
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems ttt __________________ you never know what you can do until you have to undo something you have done!

02-13-2009, 10:33 PM	#8
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Aluminum SILVERADO emblems Are they the same price if I want the letters black? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-18-2009, 08:28 PM	#9
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems Yes,because you will have to paint them.I dont do the finishing on any of my parts.They are sold right out of the mill or lathe. __________________ you never know what you can do until you have to undo something you have done!

03-03-2009, 05:43 PM	#10
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems ttt __________________ you never know what you can do until you have to undo something you have done!

03-03-2009, 05:49 PM	#11
RonnieTheBull Registered User Join Date: Feb 2009 Location: MARYLAND Posts: 84	Re: Aluminum SILVERADO emblems How about a tailgate band??? Maybe even something custom engraved???

03-03-2009, 05:52 PM	#12
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems Do you have a pic of that and how it mounts? __________________ you never know what you can do until you have to undo something you have done!

03-03-2009, 05:53 PM	#13
RonnieTheBull Registered User Join Date: Feb 2009 Location: MARYLAND Posts: 84	Re: Aluminum SILVERADO emblems Or maybe even a custom aluminum cluster cover...similar to the ones Covans Classic makes...only to fit over the factory gauges...I was told by Covans that theirs will not work over the factory gauges due to the offset in the back

03-03-2009, 06:04 PM	#14
RonnieTheBull Registered User Join Date: Feb 2009 Location: MARYLAND Posts: 84	Re: Aluminum SILVERADO emblems Here is a pic I pulled from another thread...the tailgate band sells though LMC for $300+...not sure what it would take for you to make one or if it would even be worth the while cost wise...but I am sure if it was reasonable you would have plenty of taker...especially with the ability to customize it...as far as the mounting of it we will have to wait for someone to chime in...I've never had a truck with one but do planning on putting one on my truck...gotta assume some sort of clip and fastner...or adhesive.... Also is a pic of the gauge cover by Covans..they sell these for $250...love the look of them and they are a great alternative to the billet overlay that is offered on the market...this actually replaces the entire piece...again not sure of whats involved in the making of these or if it would even be worth your while...but if it possible...I am sure you would get plenty of interest Attached Images

03-03-2009, 06:24 PM	#15
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems I will look into both of those.The coven dash looks like it is cast if it is aluminum.The tail gate band we might be able to do pretty easy.Depending on what you want engraved I am going to say around $200.00 shipped. __________________ you never know what you can do until you have to undo something you have done!



Register or Log In To remove these advertisements.

03-03-2009, 07:12 PM	#17
RonnieTheBull Registered User Join Date: Feb 2009 Location: MARYLAND Posts: 84	Re: Aluminum SILVERADO emblems Here is another pic of the tail gate band...also the band acroos the bacl of the cab would be another great idea...pics are attached Attached Images

03-03-2009, 07:52 PM	#18
mekdad Registered User Join Date: May 2008 Location: Filer, Idaho Posts: 416	Re: Aluminum SILVERADO emblems Just keep in mind that I dont do bending and forming,just mill and lathe work. __________________ you never know what you can do until you have to undo something you have done!

03-03-2009, 09:16 PM	#19
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Aluminum SILVERADO emblems As soon as I get the 6.0 badges on I will post the pics.. just been too lazy. Whoever buys them from mekdad will not be disappointed, they are top notch! __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

03-14-2009, 02:49 AM	#21
rod86 great southern land Join Date: Feb 2008 Location: perth - australia Posts: 6,194	Re: Aluminum SILVERADO emblems would you be able to make grille pieces? i want a middle bar for my phantom grille, like the one on the black/silver pic. but more like the stock center bar with a recess milled into it so it can be painted same colour as the body and have the raised outer edges. Attached Images __________________ rod 86 chevy c10 silverado

06-15-2011, 11:26 PM	#23
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Aluminum SILVERADO emblems you might want to PM him, this thread is 2+ years old __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

04-19-2015, 12:30 AM	#25
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: Aluminum SILVERADO emblems Wonder what happened to this guy? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

Register or Log In To remove these advertisements.