parting out 75 1/2 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thinair** · 02-02-2009, 11:49 PM

parting this out.everything worked when it was parked (motor junk) here are a couple of parts............
a/c compressor,clutch turns free,w/brackets for small block.......all hoses are here,can tell you that one hose is oily from leaking.$75 plus ride for compressor and brackets.

headliner trim,pre/shoulder belts,grey in color (I also have a-pillars for 81 up if needed for those years.$35 plus ride

tilt,auto column w/key,no wheel.VERY VERY small play,would be super easy to snug this one up.$35 plus ride

there are SOME other good parts on this,let me know with needs,and I will price as they come......75 1/2 ton,400sbc(junk),th350,np203,3.08s

mhicks · 02-03-2009, 10:46 AM

What does the wood grain insert in the dash look like?

**ScottH** · 02-03-2009, 11:39 AM

I might be interested in the seat belts, pending condition and price shipped to 08753.

Also could u give a shipping cost on the column?

Thanks.

jchav62 · 02-03-2009, 11:42 AM

I would like to get in line for the column as well, shipped to 87507.

**thinair** · 02-03-2009, 02:59 PM

mhicks......dash insert isn't any good
scottH......seat belts are probablly supposed to be grey,but they are really faded in spots to a light tan and the buckles are a pea green color,not too good.......$23 shipping to you on the column
JChav62........$19 shipping on the column to you

jchav62 · 02-03-2009, 03:05 PM

If ScottH says no, I'll take it.

**ScottH** · 02-04-2009, 12:01 PM

Great price on the column but I'm gonna have to pass. On the belts, can u post or send me pics of the buckles (female end)?

Thanks.

jchav62 · 02-04-2009, 12:31 PM

I'll take the column. Paypal?

**thinair** · 02-04-2009, 12:38 PM

I sent ya a PM.....$54 total

jchav62 · 02-04-2009, 02:21 PM

PM sent. Payment sent.

Thanks!!

brothers69c-10 · 02-04-2009, 04:04 PM

What are the doors like?

**thinair** · 02-04-2009, 09:05 PM

column is SOLD..........

brothers......these doors are junk,but I still have the other set of doors that I have posted on the site,these are off of a 90 suburban,power,factory power mirrors,RH door glass is missing(have others if needed)couple dings,and JUST starting in the bottom lip.......I could meet you in Atlantic if it would help......$200.00 for the pair

brothers69c-10 · 02-05-2009, 12:39 PM

pm sent

**thinair** · 02-05-2009, 12:59 PM

no PM showing up......????????

brothers69c-10 · 02-05-2009, 05:04 PM

there is one now. My computer crashed when i went to send the one earlier.

84 400 · 02-09-2009, 10:05 AM

np203 shifter assembly?

Russell · 02-09-2009, 02:27 PM

Is the floor hump removable? High hump? What is the overall length of it from the front lip to the rear lip?

**thinair** · 02-10-2009, 01:04 PM

give me a chance to check and I'll let ya know on the shifter and hump

**thinair** · 02-10-2009, 02:39 PM

84 400........$30 plus ride on the shifter assembly

russell......hump unbolts,high,22 3/8" (ish with tape straight across)front to back......$20 plus ride

Russell · 02-10-2009, 11:23 PM

Doh! Seems all the floor humps are 22.5" long, mine is 25.25" long and I can't find one for it anywhere!

84 400 · 02-10-2009, 11:34 PM

You have a PM!

**thinair** · 02-11-2009, 12:57 AM

russell.........I'll check a place here for one like that

84 400.....pm sent back

deedle dinlgehopper · 03-12-2009, 10:06 PM

I need a pair of dust covers for the front hubs. Do you still have them? How much for the pair? Thanks! Dale

**thinair** · 03-13-2009, 12:40 PM

truck is gone,sorry

02-02-2009, 11:49 PM	#1
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	parting out 75 1/2 ton 4x4 parting this out.everything worked when it was parked (motor junk) here are a couple of parts............ a/c compressor,clutch turns free,w/brackets for small block.......all hoses are here,can tell you that one hose is oily from leaking.$75 plus ride for compressor and brackets. headliner trim,pre/shoulder belts,grey in color (I also have a-pillars for 81 up if needed for those years.$35 plus ride tilt,auto column w/key,no wheel.VERY VERY small play,would be super easy to snug this one up.$35 plus ride there are SOME other good parts on this,let me know with needs,and I will price as they come......75 1/2 ton,400sbc(junk),th350,np203,3.08s Last edited by thinair; 02-02-2009 at 11:53 PM.

02-03-2009, 10:46 AM	#2
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: parting out 75 1/2 ton 4x4 What does the wood grain insert in the dash look like?

02-03-2009, 11:39 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting out 75 1/2 ton 4x4 I might be interested in the seat belts, pending condition and price shipped to 08753. Also could u give a shipping cost on the column? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2009, 11:42 AM	#4
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 I would like to get in line for the column as well, shipped to 87507. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-03-2009, 02:59 PM	#5
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 mhicks......dash insert isn't any good scottH......seat belts are probablly supposed to be grey,but they are really faded in spots to a light tan and the buckles are a pea green color,not too good.......$23 shipping to you on the column JChav62........$19 shipping on the column to you

02-03-2009, 03:05 PM	#6
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 If ScottH says no, I'll take it. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 12:01 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting out 75 1/2 ton 4x4 Great price on the column but I'm gonna have to pass. On the belts, can u post or send me pics of the buckles (female end)? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-04-2009, 12:31 PM	#8
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 I'll take the column. Paypal? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 12:38 PM	#9
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 I sent ya a PM.....$54 total

02-04-2009, 02:21 PM	#10
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: parting out 75 1/2 ton 4x4 PM sent. Payment sent. Thanks!! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-04-2009, 04:04 PM	#11
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 What are the doors like? __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

02-04-2009, 09:05 PM	#12
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 column is SOLD.......... brothers......these doors are junk,but I still have the other set of doors that I have posted on the site,these are off of a 90 suburban,power,factory power mirrors,RH door glass is missing(have others if needed)couple dings,and JUST starting in the bottom lip.......I could meet you in Atlantic if it would help......$200.00 for the pair

02-05-2009, 12:39 PM	#13
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 pm sent __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"

02-05-2009, 12:59 PM	#14
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 no PM showing up......????????

02-05-2009, 05:04 PM	#15
brothers69c-10 Suburban Hick Join Date: Aug 2008 Location: Altoona, IA Posts: 810	Re: parting out 75 1/2 ton 4x4 there is one now. My computer crashed when i went to send the one earlier. __________________ Mathew 1947 Chevy 3600 1951 GMC 100 1969 Chevy C-10 396/500hp TH400 lowered 4" 1968 Imapla Custom 396/325hp TH400 "Grandmas Car" 1976 Crew Cab 4x4 diesel http://67-72chevytrucks.com/vboard/s...d.php?t=488505 1978 Chevy K-10 454 1983 S10 4x4 "Bumblb" (Grandpa's truck) 1993 Chevy S10 V8 conversion 1990 Ford Probe Gt 1992 Dodge W-150 "Old Man's Truck" 1992 Pontiac Grand Prix SE 1992 Mercury Grand Marquis-Mercruiser 2000 Ford F150 (Currently my mother drives this) 1946 Farmall H with Stan Hoist loader 1965 John Deere 110 1961 Wheel Horse " Rat Tractor"



Register or Log In To remove these advertisements.

02-09-2009, 10:05 AM	#16
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 75 1/2 ton 4x4 np203 shifter assembly? __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

02-09-2009, 02:27 PM	#17
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: parting out 75 1/2 ton 4x4 Is the floor hump removable? High hump? What is the overall length of it from the front lip to the rear lip? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-10-2009, 01:04 PM	#18
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 give me a chance to check and I'll let ya know on the shifter and hump

02-10-2009, 02:39 PM	#19
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 84 400........$30 plus ride on the shifter assembly russell......hump unbolts,high,22 3/8" (ish with tape straight across)front to back......$20 plus ride

02-10-2009, 11:23 PM	#20
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: parting out 75 1/2 ton 4x4 Doh! Seems all the floor humps are 22.5" long, mine is 25.25" long and I can't find one for it anywhere! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-10-2009, 11:34 PM	#21
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: parting out 75 1/2 ton 4x4 You have a PM! __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

02-11-2009, 12:57 AM	#22
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 russell.........I'll check a place here for one like that 84 400.....pm sent back

03-12-2009, 10:06 PM	#23
deedle dinlgehopper Registered User Join Date: Mar 2009 Location: Florence, AL Posts: 1	Re: parting out 75 1/2 ton 4x4 I need a pair of dust covers for the front hubs. Do you still have them? How much for the pair? Thanks! Dale

03-13-2009, 12:40 PM	#24
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: parting out 75 1/2 ton 4x4 truck is gone,sorry

Register or Log In To remove these advertisements.