Rebuilt my tilt column! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1985K10 · 02-03-2009, 11:06 PM

I just finished rebuilding my steering column for my 77, just thought I'd share some pics. Basically completely disassembled it, sandblasted and repainted everything, cleaned all electrical connections, cleaned out and re-greased all bearings and moving parts.

chevyrestoguy · 02-03-2009, 11:08 PM

Wow, what a difference!

Did it take any special tools to get it back together? On a scale of 1-10, how would it rate in difficulty?

vern350 · 02-03-2009, 11:10 PM

Looks really good. Thats a job that many of us dont tackle. Mine needs to be rebuilt, the tilt mechanism is getting sloppy. Did you use a kit to rebuild it?

spudz · 02-04-2009, 12:31 AM

Quote:

Originally Posted by chevyrestoguy

Wow, what a difference!

Did it take any special tools to get it back together? On a scale of 1-10, how would it rate in difficulty?

Looks like it took a handle of captin morgan lol

spudz · 02-04-2009, 12:32 AM

Ive done a few of these things and I hate em...... Props for you for doing and excelant job! How much to do mine??? lol

**thinair** · 02-04-2009, 12:42 AM

Quote:

Originally Posted by spudz

Looks like it took a handle of captin morgan lol

x2

heavychevy79 · 02-04-2009, 12:47 AM

Yeah nice job!
Did you use Captain Mogan to get the spooge off of the steering wheel?

You got any more pics of it broken down?

heavychevy79 · 02-04-2009, 12:54 AM

Quote:

Originally Posted by vern350

Looks really good. Thats a job that many of us dont tackle. Mine needs to be rebuilt, the tilt mechanism is getting sloppy. Did you use a kit to rebuild it?

You can take the wheel, lock plate and the signal switch out and tighten up
two of the three bolts that hold the pivot part of it. (GM should have put
loctite on those bolts)
You will need a 1/4 drive with a long ext. and a torx bit on some years.

Hoods69BadBowTie · 02-04-2009, 03:25 AM

Wow that don't look like so much fun. Turned out pretty sweet though I think. I need to get mine done too want to do it lol jk bud. How long and hard was it to get it all done?

vern350 · 02-04-2009, 12:27 PM

thanks heavychevy79, I'll have to dig into once truck comes out of storage. Once again, steering column looks awsome.

1985K10 · 02-04-2009, 07:04 PM

I wish I had taken more pics, I have a few other angles and this pic of the steering u-joint thingie, for a lack of better terms, disassembled and starting to be re-greased.

On a scale of 1-10 Id say 4 maybe, it really wasn't bad. I didn't have to replace any parts everything was just dirty and rusty, and as far as special tools you need a lock-plate compressor, and steering wheel puller. I bought both a few years back...WELL worth the money. You should have a pivot pin puller, to pull the pins the column pivots on when it tilts, but I rigged up a quick puller with an old socket, the right size screw and nut. Oh yea, and you need an E8 torx SOCKET.

I actually used Purple power, not the Captain to clean everything(cept for the rust,sandblasted that). I did use some Cafe Patron to calm my nerves though...lol.

Heres a few links that helped my through...
http://www.yearone.com/yodnn/tech/Te...9/Default.aspx
http://www.superchevy.com/tech/sucp_.../photo_16.html
http://www.buickperformance.com/tilt...lumnwobble.htm

Oh, and reassembly while watching the movie Momento is a bad idea. It really made my head hurt!

staggerd86c-10 · 02-04-2009, 11:47 PM

came out really nice good job!

6772fan · 02-05-2009, 10:25 PM

Nice work on a project most of either will walk away from or just tolerate the sloppy steering column. You should take pride in your accomplishment!

willett · 02-05-2009, 10:34 PM

i would say even watching memento is a bad idea

James McClure · 02-06-2009, 11:37 AM

Anyone who wants thier tilt colunm repaired just give me a holler, I'll do it for ya. You have to pay shipping both ways and give me twenty five smackers and your good to go. 33 years as a Chevy mechanic. I actually enjoy doing them. jim

02-03-2009, 11:06 PM	#1
1985K10 Registered User Join Date: Oct 2003 Location: CT Posts: 315	Rebuilt my tilt column! I just finished rebuilding my steering column for my 77, just thought I'd share some pics. Basically completely disassembled it, sandblasted and repainted everything, cleaned all electrical connections, cleaned out and re-greased all bearings and moving parts. __________________ Anthony 07 Tahoe LT 70 Chevelle 450HP 383-TH400 77 GMC Royal Sierra~Resto in progress~

02-03-2009, 11:08 PM	#2
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Rebuilt my tilt column! Wow, what a difference! Did it take any special tools to get it back together? On a scale of 1-10, how would it rate in difficulty?

02-03-2009, 11:10 PM	#3
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: Rebuilt my tilt column! Looks really good. Thats a job that many of us dont tackle. Mine needs to be rebuilt, the tilt mechanism is getting sloppy. Did you use a kit to rebuild it?

02-04-2009, 12:32 AM	#5
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Rebuilt my tilt column! Ive done a few of these things and I hate em...... Props for you for doing and excelant job! How much to do mine??? lol __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-04-2009, 12:47 AM	#7
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: Rebuilt my tilt column! Yeah nice job! Did you use Captain Mogan to get the spooge off of the steering wheel? You got any more pics of it broken down?

02-04-2009, 03:25 AM	#9
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Rebuilt my tilt column! Wow that don't look like so much fun. Turned out pretty sweet though I think. I need to get mine done too want to do it lol jk bud. How long and hard was it to get it all done? __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

02-04-2009, 12:27 PM	#10
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Re: Rebuilt my tilt column! thanks heavychevy79, I'll have to dig into once truck comes out of storage. Once again, steering column looks awsome.

02-04-2009, 07:04 PM	#11
1985K10 Registered User Join Date: Oct 2003 Location: CT Posts: 315	Re: Rebuilt my tilt column! I wish I had taken more pics, I have a few other angles and this pic of the steering u-joint thingie, for a lack of better terms, disassembled and starting to be re-greased. On a scale of 1-10 Id say 4 maybe, it really wasn't bad. I didn't have to replace any parts everything was just dirty and rusty, and as far as special tools you need a lock-plate compressor, and steering wheel puller. I bought both a few years back...WELL worth the money. You should have a pivot pin puller, to pull the pins the column pivots on when it tilts, but I rigged up a quick puller with an old socket, the right size screw and nut. Oh yea, and you need an E8 torx SOCKET. I actually used Purple power, not the Captain to clean everything(cept for the rust,sandblasted that). I did use some Cafe Patron to calm my nerves though...lol. Heres a few links that helped my through... http://www.yearone.com/yodnn/tech/Te...9/Default.aspx http://www.superchevy.com/tech/sucp_.../photo_16.html http://www.buickperformance.com/tilt...lumnwobble.htm Oh, and reassembly while watching the movie Momento is a bad idea. It really made my head hurt! Attached Images __________________ Anthony 07 Tahoe LT 70 Chevelle 450HP 383-TH400 77 GMC Royal Sierra~Resto in progress~

02-04-2009, 11:47 PM	#12
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Rebuilt my tilt column! came out really nice good job!

02-05-2009, 10:25 PM	#13
6772fan Active Member Join Date: Jan 2004 Location: East Texas Posts: 380	Re: Rebuilt my tilt column! Nice work on a project most of either will walk away from or just tolerate the sloppy steering column. You should take pride in your accomplishment! __________________ Lane 1979 Chevy SWB- (Second owner- Father in Law was first) 1979 Chevy Silverado SWB-Red/Red

02-05-2009, 10:34 PM	#14
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	Re: Rebuilt my tilt column! i would say even watching memento is a bad idea __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

02-06-2009, 11:37 AM	#15
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Rebuilt my tilt column! Anyone who wants thier tilt colunm repaired just give me a holler, I'll do it for ya. You have to pay shipping both ways and give me twenty five smackers and your good to go. 33 years as a Chevy mechanic. I actually enjoy doing them. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.