Best way to disconnect electrical on doors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 02-06-2009, 03:33 PM

I plan to swap out my rusty doors on the 84 Siera I bought and was wondering the best (ok, easiest) way to disconnect all the wiring for the windows and locks? Is it best to disconnect from the door side or under the dash?

Any help is appreciated.

thanks

Scott

slug · 02-06-2009, 03:53 PM

When I swapped the doors on my 83 i un hooked the locks and windows and fed the wires through the doors. it worked real good like. that's how I would suggest doing it.

pig rig · 02-06-2009, 04:22 PM

Yea feed them back from the doors is the easist way in the end or you could just cut them that just makes a lot of work in the end

lvschevytrucks · 02-06-2009, 11:16 PM

if they are like my 88 Siera, pull the rubber boot between the jam and the door (you want the Jam side) pull the wires out from inside the cab just a little and there will be a plug you can uplug from the harness, you dont even need to take off the door panels to do it

**ScottH** · 02-06-2009, 11:30 PM

Ah, I was hoping for something like that!

Thanks guys.

02-06-2009, 03:33 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Best way to disconnect electrical on doors? I plan to swap out my rusty doors on the 84 Siera I bought and was wondering the best (ok, easiest) way to disconnect all the wiring for the windows and locks? Is it best to disconnect from the door side or under the dash? Any help is appreciated. thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-06-2009, 03:53 PM	#2
slug Registered User Join Date: Jan 2008 Location: Groves,TX Posts: 483	Re: Best way to disconnect electrical on doors? When I swapped the doors on my 83 i un hooked the locks and windows and fed the wires through the doors. it worked real good like. that's how I would suggest doing it. __________________ there is nothing better than cutting metal with fire.......except cutting metal with electricity!!!

02-06-2009, 04:22 PM	#3
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: Best way to disconnect electrical on doors? Yea feed them back from the doors is the easist way in the end or you could just cut them that just makes a lot of work in the end __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

02-06-2009, 11:16 PM	#4
lvschevytrucks Unfinished Project Club Join Date: Jul 2005 Location: Florence S.C. Posts: 596	Re: Best way to disconnect electrical on doors? if they are like my 88 Siera, pull the rubber boot between the jam and the door (you want the Jam side) pull the wires out from inside the cab just a little and there will be a plug you can uplug from the harness, you dont even need to take off the door panels to do it Last edited by lvschevytrucks; 02-06-2009 at 11:17 PM.

02-06-2009, 11:30 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Best way to disconnect electrical on doors? Ah, I was hoping for something like that! Thanks guys. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.