Blazer half top - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 03-30-2009, 09:28 AM

Did anyone see this? Martinsr saw it at a show and posted this pic in the paint & body section. The place to get it is East Bay Customs at 925-634-5717 they are in Pittsburg California, for about $2000. The kit is actually made for trucks, but is designed from a blazer top.

bouncytruck · 03-30-2009, 10:38 AM

I wonder if they are the same as these - http://www.myrodshop.com/blazer.html

Critter · 03-30-2009, 01:52 PM

That's an awful nice paint job to just to go laying a fiberglass top on.

LUV2XCLR8 · 03-30-2009, 05:20 PM

Guy in post #2 e-mailed me, he is still making them, no price was given.

CDA 455 · 04-01-2009, 03:34 PM

Quote:

Originally Posted by bouncytruck

I wonder if they are the same as these - http://www.myrodshop.com/blazer.html

Quote:

Originally Posted by LUV2XCLR8

Guy in post #2 e-mailed me, he is still making them, no price was given.

I remember that half top.

Looks like a nice piece.

70k52wd · 04-04-2009, 09:39 AM

Half tops look so right. Luv em. Saw one on a Jimmy about 30 years ago. That's one of the trucks that made me fall in love with 67-72 trucks...

71_K5 · 04-05-2009, 08:01 PM

The hotrodshop replied to me too but refuses to give a price. I even told him I'd pay in advance and never heard back from him. I gave up and took the DeWalt Sawzall down to the wrecking yard and brought home the topmost section of a 72 C10 cab and made my own!

It was easier than I thought and I have less than $150 invested and that includes a sliding rear window I found on Craigslist.

If the glass tops are as thin as the one in the first post, I think I made the right decision.

Jim

orangek5 · 04-05-2009, 08:14 PM

Here's is my Half top on my jimmy.

truckeez · 06-12-2010, 02:55 PM

Quote:

Originally Posted by 71_K5

The hotrodshop replied to me too but refuses to give a price. I even told him I'd pay in advance and never heard back from him. I gave up and took the DeWalt Sawzall down to the wrecking yard and brought home the topmost section of a 72 C10 cab and made my own!

It was easier than I thought and I have less than $150 invested and that includes a sliding rear window I found on Craigslist.

If the glass tops are as thin as the one in the first post, I think I made the right decision.

Jim

someone told me he doesnt even have em-He just made the steel one off and is tryin to get intrest. It takes YEARS of doing it to have the know how to produce stuff, Some guys think they can make a proto and take to somebody -and have molds made and it'll all magically work out, When what actually happes is they get knocked off -either having their idea stolen-or the molds they paid to have made--ends up making the bucks for the fabricator instead-it a VERY back stabbin buiz in general. The guy with the black ones will send you a pic of todays paper on actual produced panels So you know its for real ..... composidyne at ya

clos69 · 04-24-2009, 09:36 AM

Orangek5...do you have any pics of the inside? I 've never seen one in person so i would like to see how they bolt up and devide the rear section of the blazer,thanks

72truckman · 04-25-2009, 02:37 AM

I really think that ORANGEK5's option is the best....

Saw it at the Goodguys a few weekends ago... Looks nice and the finish is surprisingly good for being sold as "rough" fiberglass. The guy told me they specifically made it to look exactly like the cab of a p/u for those who want the stealth look of a stock p/u but can remove during the nice months. Didn't mention the availability of a bulkhead/ load separator but that can easily be fabricated. I cant recall the price, but it was in the $2000 range

clos69 · 04-29-2009, 01:36 PM

TTT for pics

orangek5 · 04-30-2009, 09:00 PM

Sorry I have not replied sooner but I havn't been to the blazer forum sense I post the last images.

To those who interested I do not have the top on or bulk head in but I do have pics of the bulk head out of the truck but I am having Problems getting them to upload. I keep getting this message
Name: untitled1.jpg
Views: 3150
Size: 9.6 KB

Name: untitled1.jpg
Views: 3150
Size: 9.6 KB

Ill try this weekend.

clos69 · 05-01-2009, 09:46 AM

Thanks for trying to post them....If you want ..you can e-mail them to me here Clos973@yahoo.com and I will post them for you.

orangek5 · 05-01-2009, 11:53 AM

Will do, as soon as I'm off work. I will send you two zipped files. Post what you think is helpful and let me know if theres any other angles or measurments you might want

orangek5 · 05-01-2009, 08:17 PM

Quote:

Originally Posted by clos69

Thanks for trying to post them....If you want ..you can e-mail them to me here Clos973@yahoo.com and I will post them for you.

clos69 You have email from: dannylpollock@yahoo.com

powermad · 05-04-2009, 01:50 AM

I would like to see some pics if ya have the time.
Host the pics on photobucket and then post em here.

clos69 · 05-04-2009, 08:08 AM

Here are the pics that Orangek5 sent me. thanks for sharing them Danny

clos69 · 05-04-2009, 08:09 AM

Some more

hotrodhomi · 05-05-2009, 04:08 PM

Quote:

Originally Posted by clos69

Some more

That is the same one I have.

clos69 · 05-05-2009, 07:28 PM

Quote:

Originally Posted by hotrodhomi

That is the same one I have.

Do you have any pics installed?

truckeez · 06-12-2010, 05:00 PM

Quote:

Originally Posted by clos69

Do you have any pics installed?

Heres a 76-92 custom cab back wall

trucks72 · 07-01-2010, 11:34 AM

Could a person get a copy of the ad that is shown here for that top?

hotrodhomi · 05-05-2009, 08:59 PM

I couldn't find any of it installed, but here it is.

clos69 · 05-06-2009, 09:09 AM

That looks nice....thanks for sharing .How much you want for it

....or where can I find one?

03-30-2009, 09:28 AM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Blazer half top Did anyone see this? Martinsr saw it at a show and posted this pic in the paint & body section. The place to get it is East Bay Customs at 925-634-5717 they are in Pittsburg California, for about $2000. The kit is actually made for trucks, but is designed from a blazer top. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 03-30-2009 at 09:37 AM.

03-30-2009, 01:52 PM	#3
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Blazer half top That's an awful nice paint job to just to go laying a fiberglass top on. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

03-30-2009, 05:20 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer half top Guy in post #2 e-mailed me, he is still making them, no price was given. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-04-2009, 09:39 AM	#6
70k52wd Blaze-Air Join Date: Nov 2008 Location: Virginia Posts: 1,117	Re: Blazer half top Half tops look so right. Luv em. Saw one on a Jimmy about 30 years ago. That's one of the trucks that made me fall in love with 67-72 trucks...

04-05-2009, 08:01 PM	#7
71_K5 Registered User Join Date: Jun 2008 Location: Arvada, CO Posts: 2	Re: Blazer half top The hotrodshop replied to me too but refuses to give a price. I even told him I'd pay in advance and never heard back from him. I gave up and took the DeWalt Sawzall down to the wrecking yard and brought home the topmost section of a 72 C10 cab and made my own! It was easier than I thought and I have less than $150 invested and that includes a sliding rear window I found on Craigslist. If the glass tops are as thin as the one in the first post, I think I made the right decision. Jim

03-30-2009, 10:38 AM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Blazer half top I wonder if they are the same as these - http://www.myrodshop.com/blazer.html __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-05-2009, 08:14 PM	#8
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Blazer half top Here's is my Half top on my jimmy. Attached Images __________________ 1970 Jimmy 4x4 IL6 1971 Jimmy 4x4 350ci v8 1971 SWB 327ci v8 1972 Short Stepside 305ci v8 1972 Blazer 2WD CST LS9 350ci 4sp 1999 4 Door LB 1 Ton Old Body Style 5.7 v8

04-24-2009, 09:36 AM	#10
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top Orangek5...do you have any pics of the inside? I 've never seen one in person so i would like to see how they bolt up and devide the rear section of the blazer,thanks __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-25-2009, 02:37 AM	#11
72truckman Registered User Join Date: Mar 2006 Location: San Ramon, California Posts: 276	Re: Blazer half top I really think that ORANGEK5's option is the best.... Saw it at the Goodguys a few weekends ago... Looks nice and the finish is surprisingly good for being sold as "rough" fiberglass. The guy told me they specifically made it to look exactly like the cab of a p/u for those who want the stealth look of a stock p/u but can remove during the nice months. Didn't mention the availability of a bulkhead/ load separator but that can easily be fabricated. I cant recall the price, but it was in the $2000 range __________________ My 1972 Blazer 5.3 E85/ NV4500 5spd 4x4 Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=291482 **SOLD!!!!!** 1965 GMC 4X4 http://67-72chevytrucks.com/vboard/s...d.php?t=294727 Last edited by 72truckman; 04-25-2009 at 02:41 AM.

04-29-2009, 01:36 PM	#12
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top TTT for pics __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

04-30-2009, 09:00 PM	#13
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Blazer half top Sorry I have not replied sooner but I havn't been to the blazer forum sense I post the last images. To those who interested I do not have the top on or bulk head in but I do have pics of the bulk head out of the truck but I am having Problems getting them to upload. I keep getting this message Ill try this weekend. __________________ 1970 Jimmy 4x4 IL6 1971 Jimmy 4x4 350ci v8 1971 SWB 327ci v8 1972 Short Stepside 305ci v8 1972 Blazer 2WD CST LS9 350ci 4sp 1999 4 Door LB 1 Ton Old Body Style 5.7 v8

05-01-2009, 09:46 AM	#14
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top Thanks for trying to post them....If you want ..you can e-mail them to me here Clos973@yahoo.com and I will post them for you. __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

05-01-2009, 11:53 AM	#15
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Blazer half top Will do, as soon as I'm off work. I will send you two zipped files. Post what you think is helpful and let me know if theres any other angles or measurments you might want __________________ 1970 Jimmy 4x4 IL6 1971 Jimmy 4x4 350ci v8 1971 SWB 327ci v8 1972 Short Stepside 305ci v8 1972 Blazer 2WD CST LS9 350ci 4sp 1999 4 Door LB 1 Ton Old Body Style 5.7 v8

05-04-2009, 01:50 AM	#17
powermad Hillbilly Hotrod Join Date: Nov 2001 Location: Oregon Posts: 69	Re: Blazer half top I would like to see some pics if ya have the time. Host the pics on photobucket and then post em here. __________________ 69 K5, .060 over 350/465/205.

05-04-2009, 08:08 AM	#18
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top Here are the pics that Orangek5 sent me. thanks for sharing them Danny __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*



Register or Log In To remove these advertisements.

05-04-2009, 08:09 AM	#19
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top Some more __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

07-01-2010, 11:34 AM	#23
trucks72 trucks72 Join Date: Jul 2002 Location: Crossville Posts: 315	Re: Blazer half top Could a person get a copy of the ad that is shown here for that top?

05-05-2009, 08:59 PM	#24
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Blazer half top I couldn't find any of it installed, but here it is. Attached Images __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

05-06-2009, 09:09 AM	#25
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Blazer half top That looks nice....thanks for sharing .How much you want for it ....or where can I find one? __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

Register or Log In To remove these advertisements.