Front brake hose question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dznucks · 04-08-2009, 10:20 AM

Who sells a braided front brake hose for a '69? i looked at brothers and on ebay.

mbgmike · 04-08-2009, 06:31 PM

go to most brakequip dealers and they make them

Willy Prost · 04-08-2009, 07:32 PM

inline tube
http://www.inlinetube.com/

mbgmike · 04-08-2009, 07:50 PM

Brakequip is alot less expensive and they are all stainless plus they come in colors for a fashonable look

If your not close to a dealer then online is a better way I guess.

cdowns · 04-08-2009, 08:00 PM

speedway motors has the braided stainless brake hoses in different lengths

dznucks · 04-09-2009, 09:20 AM

I'll check these out thanks.

dznucks · 04-09-2009, 12:18 PM

Whats the difference between a drum brake hose and a disc brake hose? I was looking at some stainless brake hose kits from GMC Pauls and i noticed some disc brake hoses.

Jim_PA · 04-09-2009, 12:45 PM

At very least, the length is different. Disc brakes have the hose on the back of the front crossmember, and drum brakes have the hose on the front of the crossmember. (It might be the other way around! ... can't exactly remember)

BLACK AND BLUE 67-72 · 04-09-2009, 05:49 PM

Also disk and drum hose ends are different.

dznucks · 04-10-2009, 06:17 AM

Ok thanks

mbgmike · 04-10-2009, 08:47 AM

Just for reference the OEM hose lengths are
1967 12.1/8" long
1968-1971 9" long
1972 8.5/8" long

measired between ferrules-(Actual exposed hose)

dznucks · 04-10-2009, 09:33 AM

Thanks, that does actually eliminate a trip under the truck.

mbgmike · 04-10-2009, 10:05 AM

Quote:

Originally Posted by dznucks

Thanks, that does actually eliminate a trip under the truck.

It Should but these are rubber hose lengths.

PanelDeland · 04-10-2009, 01:49 PM

mbgmike is right.The ferrule length may differ between brands.The other thing to note is bend radii.The rubber hoses may bend easier/more than a similar braided hose and rerouting may be required to use them.

04-08-2009, 10:20 AM	#1
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Front brake hose question Who sells a braided front brake hose for a '69? i looked at brothers and on ebay.

04-08-2009, 06:31 PM	#2
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Front brake hose question go to most brakequip dealers and they make them

04-08-2009, 07:32 PM	#3
Willy Prost Senior Member Join Date: Jan 2000 Location: Arlington, VA Posts: 398	Re: Front brake hose question inline tube http://www.inlinetube.com/

04-08-2009, 07:50 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Front brake hose question Brakequip is alot less expensive and they are all stainless plus they come in colors for a fashonable look If your not close to a dealer then online is a better way I guess.

04-08-2009, 08:00 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Front brake hose question speedway motors has the braided stainless brake hoses in different lengths __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-09-2009, 09:20 AM	#6
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Front brake hose question I'll check these out thanks.

04-09-2009, 12:18 PM	#7
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Front brake hose question Whats the difference between a drum brake hose and a disc brake hose? I was looking at some stainless brake hose kits from GMC Pauls and i noticed some disc brake hoses.

04-09-2009, 12:45 PM	#8
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Front brake hose question At very least, the length is different. Disc brakes have the hose on the back of the front crossmember, and drum brakes have the hose on the front of the crossmember. (It might be the other way around! ... can't exactly remember)

04-09-2009, 05:49 PM	#9
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Front brake hose question Also disk and drum hose ends are different. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

04-10-2009, 06:17 AM	#10
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Front brake hose question Ok thanks

04-10-2009, 08:47 AM	#11
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Front brake hose question Just for reference the OEM hose lengths are 1967 12.1/8" long 1968-1971 9" long 1972 8.5/8" long measired between ferrules-(Actual exposed hose)

04-10-2009, 09:33 AM	#12
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Front brake hose question Thanks, that does actually eliminate a trip under the truck.

04-10-2009, 01:49 PM	#14
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Front brake hose question mbgmike is right.The ferrule length may differ between brands.The other thing to note is bend radii.The rubber hoses may bend easier/more than a similar braided hose and rerouting may be required to use them. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.