Crossover steering? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1FaastC10* · 12-23-2002, 01:43 AM

what exactly is crossover steering? what are its advantages/disadvantages? anybody have any pics?

TIA

Prerunner1982 · 12-23-2002, 03:07 AM

just takes an internet search.....

http://www.offroadunlimited.com/arti...ring/page1.htm

Pont · 12-23-2002, 11:03 AM

Here's how I did mine, just read through the entire post. Pics are near the end of the post.

http://67-72chevytrucks.com/vboard/s...threadid=15383

*1FaastC10* · 12-23-2002, 02:15 PM

thanks guysreally helps me out, i'm slowly but surely getting the bug worse and worse. how hard would it be to do this to my Dana44?

Pont · 12-23-2002, 03:25 PM

If your Dana 44 has a flat mounting pad on the passenger knuckle, this will be easy to do. If not (I think some of the newer D44's did not have a pad on the passenger knuckle but I'm not sure) then you might have to find a knuckle with this pad and swap it or find some other creative way to install, mount or weld the required part to your RH knuckle.

Guiltyone · 01-12-2003, 11:07 PM

Are you sure your front axle is a Dana44? My '78 has the GM 10 bolt up front.

1976K5CHALET · 01-17-2003, 12:51 AM

www.offroaddesign.com

12-23-2002, 01:43 AM	#1
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Crossover steering? what exactly is crossover steering? what are its advantages/disadvantages? anybody have any pics? TIA

12-23-2002, 11:03 AM	#3
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Here's how I did mine, just read through the entire post. Pics are near the end of the post. http://67-72chevytrucks.com/vboard/s...threadid=15383 __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

12-23-2002, 03:25 PM	#5
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	If your Dana 44 has a flat mounting pad on the passenger knuckle, this will be easy to do. If not (I think some of the newer D44's did not have a pad on the passenger knuckle but I'm not sure) then you might have to find a knuckle with this pad and swap it or find some other creative way to install, mount or weld the required part to your RH knuckle. __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

01-12-2003, 11:07 PM	#6
Guiltyone Registered User Join Date: Dec 2002 Location: Pittsburgh Posts: 19	Are you sure your front axle is a Dana44? My '78 has the GM 10 bolt up front. __________________ If its on a trailor, it MUST be broke!

12-23-2002, 03:07 AM	#2
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	just takes an internet search..... http://www.offroadunlimited.com/arti...ring/page1.htm

12-23-2002, 02:15 PM	#4
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	thanks guysreally helps me out, i'm slowly but surely getting the bug worse and worse. how hard would it be to do this to my Dana44?

01-17-2003, 12:51 AM	#7
1976K5CHALET Senior Member Join Date: Jan 2003 Location: Grand Junction, Colorado Posts: 610	www.offroaddesign.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.