picture of inside the door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**truckdude239** · 04-12-2009, 08:20 AM

okay my door handle broke on the outside the button fell inside the door and i can;t figure out wha ti am missing also the out lock cylider doesn't lock the door and i am trying to figure it out

mas09ts · 04-12-2009, 11:34 AM

Maybe this will help . . . (my door handle button is broke though)

Willys47 · 04-12-2009, 11:47 AM

what I have done to fix my door handel is I drilled two small holes right by the foled tabs that held the buttons back plate in position. I then slid some small finishing nails trough the hole to keep the plate and button in place. It has worked great so far I used this idea because my door handels mounting bolts are at a slight angle so when using a differant year truck handel it will not site right on the door. It's also easy and cheep $$.

04-12-2009, 08:20 AM	#1
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	picture of inside the door okay my door handle broke on the outside the button fell inside the door and i can;t figure out wha ti am missing also the out lock cylider doesn't lock the door and i am trying to figure it out __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-12-2009, 11:34 AM	#2
mas09ts Registered User Join Date: Jul 2008 Location: Gate City VA Posts: 576	Re: picture of inside the door Maybe this will help . . . (my door handle button is broke though) __________________ Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . . . Sold Dec 2011 Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739

04-12-2009, 11:47 AM	#3
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: picture of inside the door what I have done to fix my door handel is I drilled two small holes right by the foled tabs that held the buttons back plate in position. I then slid some small finishing nails trough the hole to keep the plate and button in place. It has worked great so far I used this idea because my door handels mounting bolts are at a slight angle so when using a differant year truck handel it will not site right on the door. It's also easy and cheep $$. __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.