Experience with C4 suspension kit for '47-'53 from Flat Out Eng.?

[1MADTEXAN]

Anyone here have experience with the C4 suspension kit for a '47-'53 from Flat Out Engineering?

I'm asking because I'm hoping someone who's installed this kit can comment on what wheel diameters, widths and backspacing I can expect to fit inside stock fenders/fenderwheels.

Ideally I'd like to run an 18"x7" or 8" front and an 18"x10" rear, widening the rear fenders 2" or slightly more if necessary for the latter.

[hotrodsbyray]

Might wanna do a search on the forum - I think a couple of guys have done this on here.

[sighlurr]

I'm subscribing to this thread because I plan on doing the same thing with my '50. I know that the C4's are 1.5" more narrow than the C5.

[Bob@ProAuto]

1984-87 C4 front ends are 60" hub width.
1988-96 C4 front end is 61.75" hub width.

1984-87 C4 rear, both models are 62.5" hub width.
1988-96 C4 rear, both models are 63.5" hub width.