motor mount & exhaust question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 05-02-2009, 03:08 AM

will the 73+ motor mount towers work with rams horn manifolds, or will they interfer with the towers? oh! and by the way this is for a 67 c10 burb.

p.s. thanks in advance

**'68OrangeSunshine** · 05-02-2009, 05:23 AM

I don't know either, but I have a white '67 K/10 Sub I want to mount a later BBC in, so I'm interested in mounts too.

*project 67 sub* · 05-02-2009, 12:32 PM

bump

*project 67 sub* · 05-02-2009, 06:06 PM

anyone?

*project 67 sub* · 05-03-2009, 01:57 AM

Ttt

72armyswbtruck · 05-03-2009, 02:14 AM

The mounts will work fine, you just have to allow for the correct clearance. You will need to drill the holes for the bolts thought.

*project 67 sub* · 05-04-2009, 02:40 AM

it already has the 73-87 crossmember and suspension so would i still need to redrill the holes in the top of the frame for the mounts?

*project 67 sub* · 05-04-2009, 04:59 PM

bump

05-02-2009, 03:08 AM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	motor mount & exhaust question... will the 73+ motor mount towers work with rams horn manifolds, or will they interfer with the towers? oh! and by the way this is for a 67 c10 burb. p.s. thanks in advance

05-02-2009, 05:23 AM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,622	Re: motor mount & exhaust question... I don't know either, but I have a white '67 K/10 Sub I want to mount a later BBC in, so I'm interested in mounts too. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-02-2009, 12:32 PM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... bump

05-02-2009, 06:06 PM	#4
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... anyone?

05-03-2009, 01:57 AM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... Ttt

05-03-2009, 02:14 AM	#6
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: motor mount & exhaust question... The mounts will work fine, you just have to allow for the correct clearance. You will need to drill the holes for the bolts thought. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-04-2009, 02:40 AM	#7
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... it already has the 73-87 crossmember and suspension so would i still need to redrill the holes in the top of the frame for the mounts? Last edited by project 67 sub; 05-04-2009 at 02:41 AM.

05-04-2009, 04:59 PM	#8
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... bump



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.