Stock double hump X-member and 700r4. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MylilBowTie · 05-15-2009, 05:33 PM

Anyone running a stock double hump transmission crossmember with a 700r4? Seems with mine the x-member is to wide to fit in the frame and line up with the bolt holes. If I move the x-member toward the rear differential it seems to fit much better. In that position the transmission mount doesn't bolt up to the x-member because it is moved back.

So has anyone ran into this problem? I'm thinking about making a plate to bolt to the transmission mount. It will allow the x-member to be rearward and still work. It seems like that would work but I'm not sure about strength.

05-15-2009, 05:33 PM	#1
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Stock double hump X-member and 700r4. Anyone running a stock double hump transmission crossmember with a 700r4? Seems with mine the x-member is to wide to fit in the frame and line up with the bolt holes. If I move the x-member toward the rear differential it seems to fit much better. In that position the transmission mount doesn't bolt up to the x-member because it is moved back. So has anyone ran into this problem? I'm thinking about making a plate to bolt to the transmission mount. It will allow the x-member to be rearward and still work. It seems like that would work but I'm not sure about strength. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.