Difference in NP208 & NP241 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scsindust · 05-26-2009, 04:32 PM

I am working on my 89 3/4 Suburban. It currently has a th400 mated to a NP241. I have a rebuilt 700R4 that I wanted to put into it, which is mated to a NP208. I know the 241 has an electric speedo, as the 208 is mechanical. Is there any other differences that would make me want to keep the 241? Also, I heard the 241 is a direct swap from a 208. Is this true? Thanks for all your help!

tvblazer78 · 05-26-2009, 08:10 PM

Try and see how many splines are on both and if they are the same you should be good to go.

WarBeard · 05-26-2009, 09:39 PM

4lo on the 241 is 2.72:1

2.61 in the 208

241 has a better oiling system and will keep cooler
241 is the best of the aluminum t-cases IMO.

WarBeard · 05-26-2009, 09:41 PM

also id like to add that the 700r4 has a lower first gear if im not mistakin
that combined with the 241 will give you a very nice crawl ratio!

scsindust · 05-26-2009, 09:45 PM

Thanks! I appreciate the input. I don't plan on doing hard wheeling or crawling, but just some weekend fun driving through trails, etc. Hopefully the 241 will swap straight over to the 700.

Jonboy · 05-27-2009, 08:43 AM

the 241 should swap over fine. They came in the 90 & 91 burbs, with a 700R4.

scsindust · 05-27-2009, 09:47 AM

Well on that note, if anyone wants a NP208,

scsindust · 05-27-2009, 09:52 AM

Does the 241 use ATF or gear oil??

72 CustomCamper · 05-27-2009, 12:55 PM

Atf

tvblazer78 · 05-27-2009, 01:00 PM

Quote:

Originally Posted by scsindust

Well on that note,

Sorry man you can not sell stuff if you are not a member. So become one and you can.

Thanks,
Trav

scsindust · 05-27-2009, 01:04 PM

I did register. Doesn't that make me a member? Is there more I have to do? You delete that post if you want about the 208.

tvblazer78 · 05-27-2009, 01:08 PM

Let me try this again, you are a member but not a paying one. Here is the linke to support the board.

http://www.67-72chevytrucks.com/vboard/payments.php

scsindust · 05-27-2009, 01:24 PM

Gottcha. Will do.

tvblazer78 · 05-27-2009, 01:30 PM

Quote:

Originally Posted by scsindust

Gottcha. Will do.

Thank you sir!

scsindust · 06-30-2009, 08:52 PM

I just came across some info that this swap might not work. I saw that NP241 on TH400s have a larger spline than those of 700R4s. So if my 241 wont mate up to the th400, can I use the parts from my NP208 that is currently on my to-be-installed 700r4 and make the 241 work? I guess my only real hangup on the 241 is that it has an elec speedo, which I would need to make it work in the truck. What would be my options if this swap doesn't work as planned? Can I use the 208? How could i make my speedo work with it?

05-26-2009, 04:32 PM	#1
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Difference in NP208 & NP241 I am working on my 89 3/4 Suburban. It currently has a th400 mated to a NP241. I have a rebuilt 700R4 that I wanted to put into it, which is mated to a NP208. I know the 241 has an electric speedo, as the 208 is mechanical. Is there any other differences that would make me want to keep the 241? Also, I heard the 241 is a direct swap from a 208. Is this true? Thanks for all your help! __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!

05-26-2009, 08:10 PM	#2
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Difference in NP208 & NP241 Try and see how many splines are on both and if they are the same you should be good to go. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

05-26-2009, 09:39 PM	#3
WarBeard Registered User Join Date: Jul 2008 Location: Show low,az Posts: 808	Re: Difference in NP208 & NP241 4lo on the 241 is 2.72:1 2.61 in the 208 241 has a better oiling system and will keep cooler 241 is the best of the aluminum t-cases IMO. __________________ 1978 C10 Silverado Big 10 350/350.. play toy 1990 V1500 Suburban 350/700r4..Daily driver 1987 K10 Silverado 383/400.. Wife's rig WRECKED! 1989 V2500 Suburban 350/400.. SOLD! 1974 C10 Custom10 LWB 350/350.. SOLD! 1974 C10 Custom10 SWB 350/400.. SOLD! 1999 Silverado Z71 LS1.. Wife's rig WRECKED! On the hunt for a new project....... I'm a Chevy guy.....I'm just not a "NEW" Chevy guy.

05-26-2009, 09:41 PM	#4
WarBeard Registered User Join Date: Jul 2008 Location: Show low,az Posts: 808	Re: Difference in NP208 & NP241 also id like to add that the 700r4 has a lower first gear if im not mistakin that combined with the 241 will give you a very nice crawl ratio! __________________ 1978 C10 Silverado Big 10 350/350.. play toy 1990 V1500 Suburban 350/700r4..Daily driver 1987 K10 Silverado 383/400.. Wife's rig WRECKED! 1989 V2500 Suburban 350/400.. SOLD! 1974 C10 Custom10 LWB 350/350.. SOLD! 1974 C10 Custom10 SWB 350/400.. SOLD! 1999 Silverado Z71 LS1.. Wife's rig WRECKED! On the hunt for a new project....... I'm a Chevy guy.....I'm just not a "NEW" Chevy guy.

05-26-2009, 09:45 PM	#5
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 Thanks! I appreciate the input. I don't plan on doing hard wheeling or crawling, but just some weekend fun driving through trails, etc. Hopefully the 241 will swap straight over to the 700. __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!

05-27-2009, 08:43 AM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Difference in NP208 & NP241 the 241 should swap over fine. They came in the 90 & 91 burbs, with a 700R4.

05-27-2009, 09:47 AM	#7
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 Well on that note, if anyone wants a NP208, __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!! Last edited by tvblazer78; 05-27-2009 at 01:00 PM.

05-27-2009, 09:52 AM	#8
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 Does the 241 use ATF or gear oil?? __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!

05-27-2009, 12:55 PM	#9
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: Difference in NP208 & NP241 Atf __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

05-27-2009, 01:04 PM	#11
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 I did register. Doesn't that make me a member? Is there more I have to do? You delete that post if you want about the 208. __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!

05-27-2009, 01:08 PM	#12
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Difference in NP208 & NP241 Let me try this again, you are a member but not a paying one. Here is the linke to support the board. http://www.67-72chevytrucks.com/vboard/payments.php __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

05-27-2009, 01:24 PM	#13
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 Gottcha. Will do. __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!

06-30-2009, 08:52 PM	#15
scsindust Registered User Join Date: May 2009 Location: Jessup, MD Posts: 57	Re: Difference in NP208 & NP241 I just came across some info that this swap might not work. I saw that NP241 on TH400s have a larger spline than those of 700R4s. So if my 241 wont mate up to the th400, can I use the parts from my NP208 that is currently on my to-be-installed 700r4 and make the 241 work? I guess my only real hangup on the 241 is that it has an elec speedo, which I would need to make it work in the truck. What would be my options if this swap doesn't work as planned? Can I use the 208? How could i make my speedo work with it? __________________ Jamie Play truck / kid hauler - 1989 V2500 Burb 4x4, 350, 700R4, 4" lift, headers, elec fans, the normal mods. Getting ready for the LS1 swap!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.