Which Line goes where? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbgroby · 06-08-2009, 11:36 AM

Can some one show me which line fitting is for the High Pressure line for the Saginaw Gear BOx. I'm not sure I have then hooked up right.

This photo show how I have the hoes hooked up
http://rides.webshots.com/photo/2038...54402330OerHtX

This is a better shot
http://rides.webshots.com/photo/2028...54402330AOYomg

**slepysal** · 06-08-2009, 01:29 PM

it is the upper port
Name: ps16.jpg
Views: 112
Size: 40.1 KB

it is the one with the hose clamp

neto · 06-08-2009, 02:40 PM

This is what I have on my 73. I think it's the one with out the clamps because the high pressure may be to much.

jbgroby · 06-09-2009, 07:14 AM

So the low pressure line is the one with the clamps and it goes to the hole closest to the rag joint. It looks like I have it right.

Thanks

**slepysal** · 06-09-2009, 10:47 AM

You should be fine, dont forget to bleed the pump!!! Oh and may I say
good work !

jbgroby · 06-09-2009, 11:40 AM

Thanks

06-08-2009, 11:36 AM	#1
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Which Line goes where? Can some one show me which line fitting is for the High Pressure line for the Saginaw Gear BOx. I'm not sure I have then hooked up right. This photo show how I have the hoes hooked up http://rides.webshots.com/photo/2038...54402330OerHtX This is a better shot http://rides.webshots.com/photo/2028...54402330AOYomg __________________ http://s1299.photobucket.com/user/jb...23904108567829

06-08-2009, 01:29 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Which Line goes where? it is the upper port it is the one with the hose clamp __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-08-2009, 02:40 PM	#3
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: Which Line goes where? This is what I have on my 73. I think it's the one with out the clamps because the high pressure may be to much. Attached Images

06-09-2009, 07:14 AM	#4
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Which Line goes where? So the low pressure line is the one with the clamps and it goes to the hole closest to the rag joint. It looks like I have it right. Thanks __________________ http://s1299.photobucket.com/user/jb...23904108567829

06-09-2009, 10:47 AM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Which Line goes where? You should be fine, dont forget to bleed the pump!!! Oh and may I say good work ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

06-09-2009, 11:40 AM	#6
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Which Line goes where? Thanks __________________ http://s1299.photobucket.com/user/jb...23904108567829



Register or Log In To remove these advertisements.