pair of 3/4 ton 4x4 hubcaps (fronts) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 06-24-2009, 12:19 AM

These 2 3/4 ton caps are very nice. I would say they were almost NOS. Story is that the guy I got them from took a as-new pair and carefully cut the centers out to fit the hubs. (see pic with hub). When I first looked at them I did not see the cut edges. Once I spotted this my plan was to get a dremmel and carefully sand/grind these smooth (ever so slight burrs). They are a little sharp right now which also tipped me to the cuts. I have a very clean set on my burb and compared and diameter of the cut is pretty exact. I would not hesitate at all sanding these edges and putting on a show truck. 1 very small ding out near one of the tangs at opposite the black band. Even the bead on the back does not show the dents when these get mounted. You can see small yellow paint on the one near the center (cap without the hub) which I believe was a marker used to draw the circle, will easily come off. If it was me I would clean up edges and spend a 1/2 hr waxing and buffing them up. I have been known to wax the insides too to keep dust off. $75/pair + shipping.

cheyenne10 · 06-25-2009, 12:19 AM

TTT; These are really nice. I can round up a pair of rear caps to go with for $100 + shipping.

68,69 K20 · 06-25-2009, 05:14 AM

I'm interested, do you have any pics of the rear caps?

cheyenne10 · 06-26-2009, 12:31 AM

Give me until Sat. afternoon to pull out a pair and "dust" them off.

**jimer1964** · 06-26-2009, 11:45 AM

getting in line , shipping to 19320 if 68,69 k20 passes i will take them jim

68,69 K20 · 06-26-2009, 03:32 PM

Quote:

Originally Posted by cheyenne10

Give me until Sat. afternoon to pull out a pair and "dust" them off.

Sounds good, I will probably take them, just wanted to see what the rear caps look like. I will check back in with you on Sat night or Sun morning, as I am going to a car show tommorow.

Thanks and let me know your payment info as well.

cheyenne10 · 06-29-2009, 12:30 AM

Here are the fronts listed with a pair of rear caps. A few scratches and small dents but very presentable.

68,69 K20 · 06-29-2009, 04:49 AM

I will take them, let me know how you would like to be paid, thanks!

cheyenne10 · 06-30-2009, 12:21 AM

Sold pending payment. thanks 68, 69 K20

cheyenne10 · 07-07-2009, 12:21 AM

Funds received, shipping tomorrow.

Thank you.

06-24-2009, 12:19 AM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	pair of 3/4 ton 4x4 hubcaps (fronts) These 2 3/4 ton caps are very nice. I would say they were almost NOS. Story is that the guy I got them from took a as-new pair and carefully cut the centers out to fit the hubs. (see pic with hub). When I first looked at them I did not see the cut edges. Once I spotted this my plan was to get a dremmel and carefully sand/grind these smooth (ever so slight burrs). They are a little sharp right now which also tipped me to the cuts. I have a very clean set on my burb and compared and diameter of the cut is pretty exact. I would not hesitate at all sanding these edges and putting on a show truck. 1 very small ding out near one of the tangs at opposite the black band. Even the bead on the back does not show the dents when these get mounted. You can see small yellow paint on the one near the center (cap without the hub) which I believe was a marker used to draw the circle, will easily come off. If it was me I would clean up edges and spend a 1/2 hr waxing and buffing them up. I have been known to wax the insides too to keep dust off. $75/pair + shipping. Attached Images __________________ Bob

06-25-2009, 12:19 AM	#2
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: pair of 3/4 ton 4x4 hubcaps (fronts) TTT; These are really nice. I can round up a pair of rear caps to go with for $100 + shipping. __________________ Bob

06-25-2009, 05:14 AM	#3
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: pair of 3/4 ton 4x4 hubcaps (fronts) I'm interested, do you have any pics of the rear caps? __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

06-26-2009, 12:31 AM	#4
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: pair of 3/4 ton 4x4 hubcaps (fronts) Give me until Sat. afternoon to pull out a pair and "dust" them off. __________________ Bob

06-26-2009, 11:45 AM	#5
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,684	Re: pair of 3/4 ton 4x4 hubcaps (fronts) getting in line , shipping to 19320 if 68,69 k20 passes i will take them jim

06-29-2009, 12:30 AM	#7
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: pair of 3/4 ton 4x4 hubcaps (fronts) Here are the fronts listed with a pair of rear caps. A few scratches and small dents but very presentable. Attached Images __________________ Bob

06-29-2009, 04:49 AM	#8
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: pair of 3/4 ton 4x4 hubcaps (fronts) I will take them, let me know how you would like to be paid, thanks! __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

06-30-2009, 12:21 AM	#9
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: pair of 3/4 ton 4x4 hubcaps (fronts) Sold pending payment. thanks 68, 69 K20 __________________ Bob

07-07-2009, 12:21 AM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: pair of 3/4 ton 4x4 hubcaps (fronts) Funds received, shipping tomorrow. Thank you. __________________ Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.