Need Some Dis-continued Jam Nuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hants · 07-24-2009, 05:40 PM

I'm looking for a 7/8'', 18 Thread, RH and LH nuts for tie rod ends on a 1987 Chev 1/2 Ton 4x4. After you screw the tie rod ends into either side of the long sleeve, the nuts are used to snug up to the sleeve to lock the tie rods in. I've been looking everywhere and the GM dealership says they are dis-continued. I've also tried other 7/8 nuts both coarse and fine but they need to be 18 thread. Can anyone tell me where to get these nuts? Thanks.

3r!c84 · 07-24-2009, 06:00 PM

junk yard? hardware store?

Hants · 07-24-2009, 06:04 PM

I tried junkyards (and still am) but the threads are ruined in all the nuts just like mine and no hardware store carries nuts with that thread count.

3r!c84 · 07-24-2009, 06:19 PM

go on google and put in the thred and size and try to find them online and buy them?

cjracing15 · 07-24-2009, 06:19 PM

fastenall. You may have to buy a bag of them but I will bet that they will have what you are looking for.

3r!c84 · 07-24-2009, 06:20 PM

http://extremecustomparts.com/c-6905...nut-lh-rh.html here

ElGracho · 07-24-2009, 07:42 PM

If you buy new tie-rod ends, they come with them...

Hants · 07-24-2009, 08:16 PM

Thanks a lot. I'll try those web sites. I thought the tie rod ends would come with them too but when I bought them I realized that they didn't, just a nut for the other end, a grease nipple and a cotter pin.

3r!c84 · 07-24-2009, 08:32 PM

did u see that site i sent u? it has the right and left.but a lil pricey

Hants · 07-24-2009, 11:18 PM

Ya, I just checked that site out. A little pricey but whatever I need them. Thanks a lot. I'm going to order them right now.

3r!c84 · 07-25-2009, 12:02 AM

oh for got welcome to the site,as u can see we have a bunch of info on trucks,just ask.

flamingbig10 · 07-25-2009, 12:24 AM

you can get tie rods at any auto parts for around $20 each for the good stuff and the sleeves less than $10 each

07-24-2009, 05:40 PM	#1
Hants Registered User Join Date: Jul 2009 Location: Shilo, Manitoba Posts: 4	Need Some Dis-continued Jam Nuts I'm looking for a 7/8'', 18 Thread, RH and LH nuts for tie rod ends on a 1987 Chev 1/2 Ton 4x4. After you screw the tie rod ends into either side of the long sleeve, the nuts are used to snug up to the sleeve to lock the tie rods in. I've been looking everywhere and the GM dealership says they are dis-continued. I've also tried other 7/8 nuts both coarse and fine but they need to be 18 thread. Can anyone tell me where to get these nuts? Thanks. Last edited by old Rusty C10; 07-24-2009 at 06:03 PM.

07-24-2009, 06:00 PM	#2
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need Some Dis-continued Jam Nuts junk yard? hardware store? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-24-2009, 06:04 PM	#3
Hants Registered User Join Date: Jul 2009 Location: Shilo, Manitoba Posts: 4	Re: Need Some Dis-continued Jam Nuts I tried junkyards (and still am) but the threads are ruined in all the nuts just like mine and no hardware store carries nuts with that thread count.

07-24-2009, 06:19 PM	#4
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need Some Dis-continued Jam Nuts go on google and put in the thred and size and try to find them online and buy them? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-24-2009, 06:19 PM	#5
cjracing15 Registered User Join Date: Jan 2007 Location: Lexington, TN Posts: 1,427	Re: Need Some Dis-continued Jam Nuts fastenall. You may have to buy a bag of them but I will bet that they will have what you are looking for. __________________ The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck Last edited by cjracing15; 07-24-2009 at 06:20 PM.

07-24-2009, 06:20 PM	#6
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need Some Dis-continued Jam Nuts http://extremecustomparts.com/c-6905...nut-lh-rh.html here __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-24-2009, 07:42 PM	#7
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Re: Need Some Dis-continued Jam Nuts If you buy new tie-rod ends, they come with them... __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

07-24-2009, 08:16 PM	#8
Hants Registered User Join Date: Jul 2009 Location: Shilo, Manitoba Posts: 4	Re: Need Some Dis-continued Jam Nuts Thanks a lot. I'll try those web sites. I thought the tie rod ends would come with them too but when I bought them I realized that they didn't, just a nut for the other end, a grease nipple and a cotter pin.

07-24-2009, 08:32 PM	#9
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need Some Dis-continued Jam Nuts did u see that site i sent u? it has the right and left.but a lil pricey __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-24-2009, 11:18 PM	#10
Hants Registered User Join Date: Jul 2009 Location: Shilo, Manitoba Posts: 4	Re: Need Some Dis-continued Jam Nuts Ya, I just checked that site out. A little pricey but whatever I need them. Thanks a lot. I'm going to order them right now.

07-25-2009, 12:02 AM	#11
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need Some Dis-continued Jam Nuts oh for got welcome to the site,as u can see we have a bunch of info on trucks,just ask. __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-25-2009, 12:24 AM	#12
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Need Some Dis-continued Jam Nuts you can get tie rods at any auto parts for around $20 each for the good stuff and the sleeves less than $10 each __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 07-25-2009 at 12:26 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.