Sanderson compressor same mounting as GM? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrrieG · 07-27-2009, 10:54 PM

My donor truck came with a factory AC compressor assumed to be non-functional since it was residing in the bed. My used Vintage Air system uses a Sanderson Compressor. Question is will the GM brackets work for the Sanderson? Thanks

blackdiesel · 07-28-2009, 07:28 AM

Don't think so. New brackets come with the vintage air kit to put the conpressor on the motor. If you didn't get them with your use unit. Check out Alan Groves brackets, They make brackets for anything.

Houston54 · 07-28-2009, 08:25 AM

Vintage air has a bracket that will adapt the Sanden style compressor to the GM bracketry or even to their serpentine set-up if that is what you are running. I believe Alan Grove is the manufacturer of the brackets.

OrrieG · 07-28-2009, 11:25 AM

Thanks for the replys, it confirmed that you toss the stock stuff. VA also has instructions for and modifing the PS bracket to fit (for a 74 setup which I am using). I am taking the Harrison compressor I have by a AC shop to see if it can be tuned up and converted for R134 for less than a new one.

07-27-2009, 10:54 PM	#1
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Sanderson compressor same mounting as GM? My donor truck came with a factory AC compressor assumed to be non-functional since it was residing in the bed. My used Vintage Air system uses a Sanderson Compressor. Question is will the GM brackets work for the Sanderson? Thanks __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-28-2009, 07:28 AM	#2
blackdiesel Registered User Join Date: Jan 2009 Location: Omaha, Arkansas Posts: 929	Re: Sanderson compressor same mounting as GM? Don't think so. New brackets come with the vintage air kit to put the conpressor on the motor. If you didn't get them with your use unit. Check out Alan Groves brackets, They make brackets for anything. __________________ '57 Chevy Pickup '56 GMC LCF Cummins '38 Chrysler Royal '57 2wd change http://67-72chevytrucks.com/vboard/s...light=speedway

07-28-2009, 08:25 AM	#3
Houston54 Registered User Join Date: Feb 2005 Location: location Posts: 527	Re: Sanderson compressor same mounting as GM? Vintage air has a bracket that will adapt the Sanden style compressor to the GM bracketry or even to their serpentine set-up if that is what you are running. I believe Alan Grove is the manufacturer of the brackets.

07-28-2009, 11:25 AM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Sanderson compressor same mounting as GM? Thanks for the replys, it confirmed that you toss the stock stuff. VA also has instructions for and modifing the PS bracket to fit (for a 74 setup which I am using). I am taking the Harrison compressor I have by a AC shop to see if it can be tuned up and converted for R134 for less than a new one. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.