Need pics of stock brackets.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low84 · 08-24-2009, 12:16 PM

Assembly?

I don't even know what to call it. Here's the deal, the engine is pretty much done, I replaced the heads and what not, just need to drop the distributor and hook up the lines.

The problem is I put the brackets and bolts how I thought I would remember putting them back together and my neice scattered them all over the front yard.

I need help. It's a stock 350 I just need pictures or a diagram would be greatly appreciated.

Thanks.

**forgot to mention its an '84**

Low84 · 09-10-2009, 07:07 PM

anybody with a stock 350 willing to go out and snap a few pics? Please?

Cherub · 09-10-2009, 07:41 PM

what brackets exactly?

Low84 · 09-10-2009, 07:50 PM

All of them! I can't figure out how to piece together the brackets that hold the AC compressor, the alternator and what not.

I pretty much have a longblock at this point.

3r!c84 · 09-10-2009, 07:56 PM

here i hope this helps
this is all the pics i got

**N2TRUX** · 09-10-2009, 07:58 PM

Lay all your brackets out on the floor and snap a pic, then post it. Maybe we can piece the puzzle together that way.

Metz · 09-10-2009, 09:19 PM

I need the ac bracket diagram as well. I am putting ac on with a r 4 compressor, I also have power steering. Thank you

Low84 · 11-29-2009, 11:18 PM

Aww man, the bad luck just doesn't stop. My laptop monitor burned out right after this thread. Luckily I got a new one, but also blew my budget. Anyhow, I'll get the pics up in a bit.

Scootin 81 C20 · 11-29-2009, 11:22 PM

Mine may not have AC, but I can help with the power steering and alternator bracket pics.

Low84 · 11-29-2009, 11:23 PM

Low84 · 11-29-2009, 11:26 PM

Quote:

Originally Posted by 3r!c84

here i hope this helps
this is all the pics i got

Appreciate it the help, I'm mostly interested in how these brackets go to the block and i think some connect with each other?

Quote:

Originally Posted by Scootin 81 C20

Mine may not have AC, but I can help with the power steering and alternator bracket pics.

Any help is appreciated, I need an idea because it's been so long since I worked on this truck and even longer since I saw it complete.

Low84 · 11-29-2009, 11:35 PM

This is pretty much what I'm working on. Already got the intake manifold back on there but everything else is pretty much the same.

Basically just have the crank and water pump on the block.

**Edit**

Scootin 81 C20 · 11-29-2009, 11:40 PM

Ok, that looks to be the same engine I am running, so I'll get those pics up tomorrow for ya. It'll give me something to do while I'm waiting on my friend to get to school.

Low84 · 11-29-2009, 11:54 PM

Cool, good looking out.

Scootin 81 C20 · 11-30-2009, 08:39 PM

Well, as promised, here's the pics. The first one is the power steering bracket and the second is the alternator bracket.

Low84 · 11-30-2009, 09:27 PM

Sweet! That's exactly what I needed, thanks.

Scootin 81 C20 · 11-30-2009, 09:43 PM

No problem, just let me know if you need any more.

Slonaker · 12-02-2009, 05:05 PM

I have detailed pics of all of them from my '86. Let me know if you need them. PM me if you do. I'm hardly ever on the board any more, and might not see it.

Slonaker

08-24-2009, 12:16 PM	#1
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Need pics of stock brackets.... Assembly? I don't even know what to call it. Here's the deal, the engine is pretty much done, I replaced the heads and what not, just need to drop the distributor and hook up the lines. The problem is I put the brackets and bolts how I thought I would remember putting them back together and my neice scattered them all over the front yard. I need help. It's a stock 350 I just need pictures or a diagram would be greatly appreciated. Thanks. forgot to mention its an '84 __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265 Last edited by Low84; 08-24-2009 at 12:16 PM.

09-10-2009, 07:07 PM	#2
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... anybody with a stock 350 willing to go out and snap a few pics? Please? __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

09-10-2009, 07:41 PM	#3
Cherub Registered User Join Date: Feb 2008 Location: Houston Posts: 970	Re: Need pics of stock brackets.... what brackets exactly? __________________ 2014 LTZ Z71 Silverado 82 C15 LQ4/4L80E Conversion 78 Suburban build (SOLD) 83 4x4 Suburban(SOLD) 82 C15 (my first truck)

09-10-2009, 07:50 PM	#4
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... All of them! I can't figure out how to piece together the brackets that hold the AC compressor, the alternator and what not. I pretty much have a longblock at this point. __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

09-10-2009, 07:56 PM	#5
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Need pics of stock brackets.... here i hope this helps this is all the pics i got Attached Images __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

09-10-2009, 07:58 PM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Need pics of stock brackets.... Lay all your brackets out on the floor and snap a pic, then post it. Maybe we can piece the puzzle together that way. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-10-2009, 09:19 PM	#7
Metz Registered User Join Date: Jul 2009 Location: Rockvale,Tn Posts: 44	Re: Need pics of stock brackets.... I need the ac bracket diagram as well. I am putting ac on with a r 4 compressor, I also have power steering. Thank you

11-29-2009, 11:18 PM	#8
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... Aww man, the bad luck just doesn't stop. My laptop monitor burned out right after this thread. Luckily I got a new one, but also blew my budget. Anyhow, I'll get the pics up in a bit. __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

11-29-2009, 11:22 PM	#9
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Need pics of stock brackets.... Mine may not have AC, but I can help with the power steering and alternator bracket pics. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-29-2009, 11:23 PM	#10
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

11-29-2009, 11:35 PM	#12
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... This is pretty much what I'm working on. Already got the intake manifold back on there but everything else is pretty much the same. Basically just have the crank and water pump on the block. Edit __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265 Last edited by Low84; 11-29-2009 at 11:39 PM.

11-29-2009, 11:40 PM	#13
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Need pics of stock brackets.... Ok, that looks to be the same engine I am running, so I'll get those pics up tomorrow for ya. It'll give me something to do while I'm waiting on my friend to get to school. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-29-2009, 11:54 PM	#14
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... Cool, good looking out. __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265

11-30-2009, 08:39 PM	#15
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Need pics of stock brackets.... Well, as promised, here's the pics. The first one is the power steering bracket and the second is the alternator bracket. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

11-30-2009, 09:27 PM	#16
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: Need pics of stock brackets.... Sweet! That's exactly what I needed, thanks. __________________ 1978 stepside C10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=468265



Register or Log In To remove these advertisements.

11-30-2009, 09:43 PM	#17
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Need pics of stock brackets.... No problem, just let me know if you need any more. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-02-2009, 05:05 PM	#18
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: Need pics of stock brackets.... I have detailed pics of all of them from my '86. Let me know if you need them. PM me if you do. I'm hardly ever on the board any more, and might not see it. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado Last edited by Slonaker; 12-02-2009 at 05:09 PM.

Register or Log In To remove these advertisements.