rear seat mounting pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimmyFloyd · 08-26-2009, 11:01 AM

I am looking for some pictures of the factory rear seat mounting locations, hardware and reinforcing plates. My truck never came with a rear seat, but I did get one, as well as some of the plates and floor sections, but want to see what it looks like in the factory locations. Thanks.

**bigdon-70blazer** · 08-28-2009, 09:53 AM

I can' believe no one has been able to help you by now. I will take pics and post for you today!

**bigdon-70blazer** · 08-28-2009, 10:16 AM

Pics coming in a minute

**bigdon-70blazer** · 08-28-2009, 10:25 AM

I went out and got some quick pics of the floor mounting locations for the back seat and the underneath side. Hope they help, let me know if you need something else!

**bigdon-70blazer** · 08-28-2009, 10:34 AM

More pics, this is my 56K mile 1970 Blazer 4WD BTW.

**bigdon-70blazer** · 08-28-2009, 10:36 AM

On the under side, the 4 holes in a row are the bar support you see and the 2 holes to the front of them are backed by the little plate and caged nut setup. I hope this is clear to you because I can see where it may be a tad confusing.

JimmyFloyd · 08-28-2009, 10:47 AM

That helps a lot. I got the reinforcing bar , but don't believe I got the front ones. I also don't have those plates on the top side of the bed. Looks like I will have to find some of those or make them.

Thanks again.

drunkbus · 08-28-2009, 12:58 PM

Quote:

Originally Posted by bigdon-70blazer

I went out and got some quick pics of the floor mounting locations for the back seat and the underneath side. Hope they help, let me know if you need something else!

I was needing the same info. Does anybody have a measurement how far the holes are located from the back edge of the tub?

**bigdon-70blazer** · 08-28-2009, 02:44 PM

I will get the measurement in a few and post.

**bigdon-70blazer** · 08-28-2009, 02:50 PM

For you drunkbus 30 3/4 inches from the back of the tub to centerline of the back row of 4 bolt holes. Hope that helps.

drunkbus · 08-28-2009, 03:46 PM

Quote:

Originally Posted by bigdon-70blazer

For you drunkbus 30 3/4 inches from the back of the tub to centerline of the back row of 4 bolt holes. Hope that helps.

Thank you very much.

JWPOORE · 08-28-2009, 05:12 PM

Quote:

Originally Posted by bigdon-70blazer

For you drunkbus 30 3/4 inches from the back of the tub to centerline of the back row of 4 bolt holes. Hope that helps.

Thanks for this info and pics as well. Sorry to intrude, but could someone tell me if there would any problems with drilling holes for the rear seat using these measurments and pics to go by. My Blazer (1970) never came with a rear seat and doesn't have any holes to mount one whatsoever.

**jaros44sr** · 08-28-2009, 05:44 PM

Quote:

Originally Posted by JimmyFloyd

That helps a lot. I got the reinforcing bar , but don't believe I got the front ones. I also don't have those plates on the top side of the bed. Looks like I will have to find some of those or make them.

Thanks again.

I may have something like that welded to my oringinal floor, have to go look

08-26-2009, 11:01 AM	#1
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	rear seat mounting pictures I am looking for some pictures of the factory rear seat mounting locations, hardware and reinforcing plates. My truck never came with a rear seat, but I did get one, as well as some of the plates and floor sections, but want to see what it looks like in the factory locations. Thanks. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

08-28-2009, 09:53 AM	#2
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures I can' believe no one has been able to help you by now. I will take pics and post for you today!

08-28-2009, 10:16 AM	#3
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures Pics coming in a minute

08-28-2009, 10:25 AM	#4
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures I went out and got some quick pics of the floor mounting locations for the back seat and the underneath side. Hope they help, let me know if you need something else! Attached Images

08-28-2009, 10:34 AM	#5
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures More pics, this is my 56K mile 1970 Blazer 4WD BTW. Attached Images

08-28-2009, 10:36 AM	#6
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures On the under side, the 4 holes in a row are the bar support you see and the 2 holes to the front of them are backed by the little plate and caged nut setup. I hope this is clear to you because I can see where it may be a tad confusing.

08-28-2009, 10:47 AM	#7
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: rear seat mounting pictures That helps a lot. I got the reinforcing bar , but don't believe I got the front ones. I also don't have those plates on the top side of the bed. Looks like I will have to find some of those or make them. Thanks again. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

08-28-2009, 02:44 PM	#9
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures I will get the measurement in a few and post.

08-28-2009, 02:50 PM	#10
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: rear seat mounting pictures For you drunkbus 30 3/4 inches from the back of the tub to centerline of the back row of 4 bolt holes. Hope that helps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.